Some Insights into Synthetic Jet Actuation From Analytical Modelling

An analytical model based on the laws of fluid dynamics for synthetic jet actuation into quiescent air as well as into external flow fields is presented. A synthetic jet actuator consists of a cavity with a driven wall and an orifice. Under actuation, the wall is oscillated resulting in an oscillatory flow through the orifice. In the model, the driven wall is modelled as a single degree of freedom mechanical system, which is pneumatically coupled to the cavity-orifice arrangement acting as a Helmholtz resonator. The latter has been modelled using the unsteady form of the continuity and Bernoulli equations with a loss term. External flow field effects are represented by fluctuating external pressure at the actuator orifice. The model has been validated against experimental data available in the published literature, and excellent agreement is obtained between the predicted and measured frequency responses as well as the phase relationships between velocities and pressures. The model and analysis based on it provides valuable insights into the behaviour of synthetic jet actuators, and reveals amongst other things, that air in the actuator cavity exhibits compressibility at all frequencies beyond the Helmholtz resonance frequency. Furthermore, the actuator output velocity is maximised when cavity Helmholtz and wall natural frequencies are brought together. The presence of an external flow field could either aid or hinder actuation depending on the phase relationship between, and the relative frequencies of, the wall forcing and external pressure fluctuations.

[1]  A. Crook,et al.  The development and implementation of synthetic jets for the control of separated flow , 1999 .

[2]  D. Smith,et al.  Interaction of a Synthetic Jet with a Crossflow Boundary Layer , 2002 .

[3]  A. Glezer,et al.  Vectoring and small-scale motions effected in free shear flows using synthetic jet actuators , 1997 .

[4]  Lawrence E. Kinsler,et al.  Fundamentals of acoustics , 1950 .

[5]  M. Amitay,et al.  SYNTHETIC JETS , 2001 .

[6]  Rajnish N. Sharma,et al.  Fluid-Dynamics-Based Analytical Model for Synthetic Jet Actuation , 2007 .

[7]  Václav Tesař,et al.  Annular synthetic jet used for impinging flow mass-transfer , 2003 .

[8]  Thomas McLaughlin,et al.  Effect of geometric parameters on the velocity output of a synthetic jet actuator , 2002 .

[9]  J. Seitzman,et al.  Mixing control of fuel jets using synthetic jet technology - Scalar field measurements , 1999 .

[10]  S. G. Mallinson,et al.  Some characteristics of synthetic jets , 1999 .

[11]  Ari Glezer,et al.  A round turbulent jet produced by an oscillating diaphragm , 1996 .

[12]  Peter Richards,et al.  Computational modelling in the prediction of building internal pressure gain functions , 1997 .

[13]  Michael Amitay,et al.  Control of Internal Flow Separation using Synthetic Jet Actuators , 2000 .

[14]  D. W. Etheridge.  Nondimensional methods for natural ventilation design , 2002 .

[15]  Q. Gallas,et al.  Low Dimensional Modeling of Zero-Net Mass-Flux Actuators , 2004 .

[16]  R. Holman,et al.  A Jet Formation Criterion for Synthetic Jet Actuators , 2003 .

[17]  Rajnish N. Sharma,et al.  An Analytical Model for Synthetic Jet Actuation , 2006 .

[18]  Mark Sheplak,et al.  Lumped Element Modeling of Piezoelectric-Driven Synthetic Jet Actuators , 2002 .

[19]  J. Murthy,et al.  MEMS-enabled thermal management of high-heat-flux devices EDIFICE: embedded droplet impingement for integrated cooling of electronics , 2001 .

[20]  Louis N. Cattafesta,et al.  Optimization of Synthetic Jet Actuators , 2003 .

[21]  B. J. Vickery.  Internal pressures and interactions with the building envelope , 1994 .

[22]  Michel Sunyach,et al.  Contrôle par jet pulsé de l'écoulement dans un divergent court à grand angle , 2000 .

[23]  A. Glezer,et al.  The formation and evolution of synthetic jets , 1998 .

[24]  Peter Richards,et al.  Computational modelling of the transient response of building internal pressure to a sudden opening , 1997 .

[25]  F. A. Seiler,et al.  Numerical Recipes in C: The Art of Scientific Computing , 1989 .

[26]  Ari Glezer,et al.  Mixing control of fuel jets using synthetic jet technology - Velocity field measurements , 1999 .

[27]  Yair Guy,et al.  VELOCITY MEASUREMENTS IN A SYNTHETIC JET , 2001 .