Advances in numerical modeling of environmental barrier coating systems for gas turbines

[1]  M. Begley,et al.  Transition from penetration cracking to spallation in environmental barrier coatings on ceramic composites , 2019, Surface and Coatings Technology.

[2]  O. Guillon,et al.  Environmental Barrier Coatings Made by Different Thermal Spray Technologies , 2019, Coatings.

[3]  H. Kakisawa,et al.  Crack Initiation Criteria in EBC under Thermal Stress , 2019, Coatings.

[4]  S. Arnold,et al.  Modeling of the Influence of a Damaged Thermally Grown Oxide (TGO) Layer in an Environmental Barrier Coating System , 2019, American Society for Composites 2019.

[5]  O. Guillon,et al.  A constitutive model for the sintering of suspension plasma‐sprayed thermal barrier coating with vertical cracks , 2019, Journal of the American Ceramic Society.

[6]  Jia Liu,et al.  High-entropy environmental barrier coating for the ceramic matrix composites , 2019, Journal of the European Ceramic Society.

[7]  Dongming Zhu,et al.  Microscale fracture mechanisms of HfO2-Si environmental barrier coatings , 2019, Journal of the European Ceramic Society.

[8]  Yongle Sun,et al.  Modelling and analysis of the oxide growth coupling behaviour of thermal barrier coatings , 2019, Journal of Materials Science.

[9]  S. Amidi,et al.  Interface delamination vs. bulk cracking along wavy interfaces , 2019, Engineering Fracture Mechanics.

[10]  Hongjie Wang,et al.  Thermal shock resistance of γ-Y2Si2O7/Y2O3-Al2O3-SiO2 coating for porous Si3N4 ceramics , 2019, Surface and Coatings Technology.

[11]  O. Guillon,et al.  Sintering resistance of advanced plasma-sprayed thermal barrier coatings with strain-tolerant microstructures , 2018, Journal of the European Ceramic Society.

[12]  Liu Yueming,et al.  A coupled mechanical-chemical model for reflecting the influence of stress on oxidation reactions in thermal barrier coating , 2018, Journal of Applied Physics.

[13]  Yiguang Wang,et al.  Formation and growth of silica layer beneath environmental barrier coatings under water-vapor environment , 2018 .

[14]  C. Przybyla,et al.  Modeling environmentally induced property degradation of SiC/BN/SiC ceramic matrix composites , 2018 .

[15]  Hongjie Wang,et al.  Experiments and transient finite element simulation of γ-Y2Si2O7/B2O3-Al2O3-SiO2 glass coating on porous Si3N4 substrate under thermal shock , 2018 .

[16]  Stephan Wulfinghoff,et al.  A novel approach for the prediction of deformation and fracture in hard coatings : Comparison of numerical modeling and nanoindentation tests , 2018 .

[17]  B. Harder,et al.  Development of Advanced Environmental Barrier Coatings for SiC/SiC Ceramic Matrix Composites: Path Toward 2700 F Temperature Capability and Beyond , 2017 .

[18]  Yuan-jing Wang,et al.  Damage characterization model of ceramic coating systems based on energy analysis and bending tests , 2017 .

[19]  Tie-jun Wang,et al.  Towards enhanced sintering resistance: Air-plasma-sprayed thermal barrier coating system with porosity gradient , 2017 .

[20]  Luis Saucedo-Mora,et al.  Synchrotron X-ray characterization of crack strain fields in polygranular graphite , 2017 .

[21]  Xueling Fan,et al.  Design of Thermal Barrier Coatings Thickness for Gas Turbine Blade Based on Finite Element Analysis , 2017 .

[22]  R. W. Jackson,et al.  Silicate Deposit Degradation of Engineered Coatings in Gas Turbines: Progress Toward Models and Materials Solutions , 2017 .

[23]  R. W. Jackson,et al.  Response of molten silicate infiltrated Gd2Zr2O7 thermal barrier coatings to temperature gradients , 2017 .

[24]  R. Vaßen,et al.  Yb2Si2O7 Environmental Barrier Coatings Deposited by Various Thermal Spray Techniques: A Preliminary Comparative Study , 2017, Journal of Thermal Spray Technology.

[25]  O. Guillon,et al.  Correlation of splat morphologies with porosity and residual stress in plasma-sprayed YSZ coatings , 2017 .

[26]  Y. Umeno,et al.  Theoretical prediction of energy release rate for interface crack initiation by thermal stress in environmental barrier coatings for ceramics , 2017 .

[27]  R. Vaßen,et al.  Application of High-Velocity Oxygen-Fuel (HVOF) Spraying to the Fabrication of Yb-Silicate Environmental Barrier Coatings , 2017 .

[28]  Mahmoud Mostafavi,et al.  J-Integral Calculation by Finite Element Processing of Measured Full-Field Surface Displacements , 2017 .

[29]  Tie-jun Wang,et al.  Effect of neck formation on the sintering of air-plasma-sprayed thermal barrier coating system , 2017 .

[30]  A. Wróblewski,et al.  Durability Analysis and Experimental Validation of Environmental Barrier Coating (EBC) Performance Using Combined Digital Image Correlation and NDE , 2016 .

[31]  Yueguang Wei,et al.  Fracture Characteristics and Damage Evolution of Coating Systems Under Four‐Point Bending , 2016 .

[32]  F. Gitzhofer,et al.  Processing Parameter Effects and Thermal Properties of Y2Si2O7 Nanostructured Environmental Barrier Coatings Synthesized by Solution Precursor Induction Plasma Spraying , 2016, Journal of Thermal Spray Technology.

[33]  Tie-jun Wang,et al.  Mechanisms governing the interfacial delamination of thermal barrier coating system with double ceramic layers , 2016 .

[34]  H. Wadley,et al.  Fracture mechanisms of ytterbium monosilicate environmental barrier coatings during cyclic thermal exposure , 2016 .

[35]  M. Grujicic,et al.  Computational investigation of foreign object damage sustained by environmental barrier coatings (EBCs) and SiC/SiC ceramic-matrix composites (CMCs) , 2015 .

[36]  H. Wadley,et al.  Mechanisms of Ytterbium Monosilicate/Mullite/Silicon Coating Failure During Thermal Cycling in Water Vapor , 2015 .

[37]  J. Grady,et al.  Criteria for Crack Deflection-Penetration in EBC Coated Ceramics: A Parametric Study , 2015 .

[38]  R. Mücke,et al.  Simulation of the effect of realistic surface textures on thermally induced topcoat stress fields by two-dimensional interface functions , 2014 .

[39]  Kang N. Lee.  Environmental Barrier Coatings for SiCf/SiC , 2014 .

[40]  O. Ševeček,et al.  Effect of aging on the onset of cracks due to redistribution of residual stresses in functionally graded environmental barrier coatings of mullite/ZrO2 , 2014 .

[41]  Tie-jun Wang,et al.  Numerical study on interfacial delamination of thermal barrier coatings with multiple separations , 2014 .

[42]  J. Grady,et al.  Durability Modeling of Environmental Barrier Coating (EBC) Using Finite Element Based Progressive Failure Analysis , 2014 .

[43]  Frank Abdi,et al.  Test validation of environmental barrier coating (EBC) durability and damage tolerance modeling approach , 2014, Smart Structures.

[44]  N. Fleck,et al.  A brick model for asperity sintering and creep of APS TBCs , 2014 .

[45]  C. Heveran,et al.  Simulation of stresses in TBC–EBC coating systems for ceramic components in gas turbines , 2013 .

[46]  David L. Poerschke,et al.  Thermochemical compatibility of ytterbia–(hafnia/silica) multilayers for environmental barrier coatings , 2013 .

[47]  N. Jacobson.  Oxidation and Corrosion of Ceramics and Ceramic Matrix Composites , 2013 .

[48]  Lai-fei Cheng,et al.  Polymer-derived yttrium silicate coatings on 2D C/SiC composites , 2013 .

[49]  Tie-jun Wang,et al.  Effect of periodic surface cracks on the interfacial fracture of thermal barrier coating system , 2012 .

[50]  Dongming Zhu,et al.  Environmental Barrier Coating (EBC) Durability Modeling; An Overview and Preliminary Analysis , 2012 .

[51]  Tie-jun Wang,et al.  The effect of thermally grown oxide on multiple surface cracking in air plasma sprayed thermal barrier coating system , 2012 .

[52]  Ali Abdul-Aziz,et al.  Modeling of thermal residual stress in environmental barrier coated fiber reinforced ceramic matrix composites , 2012 .

[53]  Ali Abdul-Aziz,et al.  Environmental barrier coating (EBC) durability modeling using a progressive failure analysis approach , 2012, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[54]  Tie-jun Wang,et al.  Investigation on periodic cracking of elastic film/substrate system by the extended finite element method , 2011 .

[55]  Lai-fei Cheng,et al.  Polymer‐Derived SiOC–barium–strontium aluminosilicate Coatings as an Environmental Barrier for C/SiC Composites , 2010 .

[56]  R. Bhatt,et al.  Thermal Residual Stress in Environmental Barrier Coated Silicon Nitride‐Modeled , 2010 .

[57]  N. Fleck,et al.  A multi-scale constitutive model for the sintering of an air-plasma-sprayed thermal barrier coating, and its response under hot isostatic pressing , 2009 .

[58]  T. Clyne,et al.  A sintering model for plasma-sprayed zirconia TBCs. Part I: Free-standing coatings , 2009 .

[59]  J. Almer,et al.  Residual Stress Analysis of Multilayer Environmental Barrier Coatings , 2009 .

[60]  Sung R. Choi.  Foreign Object Damage Phenomenon by Steel Ball Projectiles in a SiC/SiC Ceramic Matrix Composite at Ambient and Elevated Temperatures , 2008 .

[61]  Carlos G. Levi,et al.  CMAS degradation of environmental barrier coatings , 2007 .

[62]  P. Murthy,et al.  Environmental/Thermal Barrier Coatings for Ceramic Matrix Composites: Thermal Tradeoff Studies , 2007 .

[63]  Jingyun Xiao,et al.  Analysis of Heat Transfer and Thermal Stress in Thermal and Environmental Barrier Coatings , 2007 .

[64]  D. K. Kim,et al.  Strength measurement of a brittle coating with a trilayer structure using instrumented indentation and in situ observation techniques , 2006 .

[65]  Dongming Zhu,et al.  Crack Driving Forces in a Multilayered Coating System for Ceramic Matrix Composite Substrates , 2005 .

[66]  S. Nair,et al.  Mechanics of delamination of a brittle coating strip on a brittle substrate , 2005 .

[67]  E. Opila,et al.  Volatility of Common Protective Oxides in High-Temperature Water Vapor: Current Understanding and Unanswered Questions , 2004 .

[68]  Narottam P. Bansal,et al.  Upper Temperature Limit of Environmental Barrier Coatings Based on Mullite and BSAS , 2003 .

[69]  A. Evans,et al.  Foreign object damage in a thermal barrier system: Mechanisms and simulations , 2003 .

[70]  A. McGuigan,et al.  An elastic plastic shear lag model for fracture of layered coatings , 2003 .

[71]  E. Jordan,et al.  Thermal Barrier Coatings for Gas-Turbine Engine Applications , 2002, Science.

[72]  P. Murthy,et al.  Life Prediction Issues in Thermal/Environmental Barrier Coatings in Ceramic Matrix Composites , 2001 .

[73]  T. Hashida,et al.  Coupled effects of temperature gradient and oxidation on thermal stress in thermal barrier coating system , 2001 .

[74]  A. Shah.  Development of Reliability Based Life Prediction Methods for Thermal and Environmental Barrier Coatings in Ceramic Matrix Composites , 2001 .

[75]  Kang N. Lee.  Current status of environmental barrier coatings for Si-Based ceramics , 2000 .

[76]  Pierre-Olivier Bouchard,et al.  Crack propagation modelling using an advanced remeshing technique , 2000 .

[77]  Kang N. Lee.  Key Durability Issues With Mullite-Based Environmental Barrier Coatings for Si-Based Ceramics , 1999 .

[78]  Robert Miller,et al.  Development and environmental durability of mullite and mullite/YSZ dual layer coatings for SiC and Si3N4 ceramics , 1996 .

[79]  N. Jacobson,et al.  New generation of plasma-sprayed mullite coatings on silicon carbide , 1995 .

[80]  N. Jacobson,et al.  Molten Salt Corrosion of SiC and Si3N4 , 1986 .

[81]  Carl E. Lowell,et al.  Failure mechanisms of thermal barrier coatings exposed to elevated temperatures , 1982 .

[82]  K. Zhou,et al.  A semi-analytical model for predicting stress evolution in multilayer coating systems during thermal cycling , 2018 .

[83]  Tie-jun Wang,et al.  Effects of sintering and mixed oxide growth on the interface cracking of air-plasma-sprayed thermal barrier coating system at high temperature , 2016 .

[84]  Caroline Sunyong Lee,et al.  Modeling of Thermal Stresses in Joining Two Layers with Multi‐ and Graded Interlayers , 2006 .

[85]  Narottam P. Bansal,et al.  Rare earth silicate environmental barrier coatings for SiC/SiC composites and Si3N4 ceramics , 2005 .

[86]  H. Eaton,et al.  Accelerated oxidation of SiC CMC's by water vapor and protection via environmental barrier coating approach , 2002 .

[87]  Anthony G. Evans,et al.  Mechanisms controlling the durability of thermal barrier coatings , 2001 .