The Improvement of Bond Strength Properties and Surface Characteristics of Resinous Woods

Abstract Apitong (Dipterocarpus spp.) and Caribbean pine (Pinus caribaea Morelet) contain high amounts of extractives that contribute to poor bonding. To reduce, if not to eliminate, the effects of these extraneous substances, surfaces of small wood blocks were Soxhlet-extracted for 8 hours by different solvents. Wettability of the wood surfaces was then measured by droplet and dynamic methods using water and dilute NaOH as liquids. Tensile shear strengths of extracted wood bonded with aqueous vinyl polymer isocyanate (API), resorcinol formaldehyde (RF) and polyvinyl acetate (PVAc) resin adhesives were also measured. Results revealed that although Caribbean pine had much higher resin content than Apitong, the former had better wettability than the latter. Solvent extraction of the adherend with either hexane or ethanol-benzene (1:2) for 8 hours was not enough to improve its wettability but enough to improve its gluability. However, successive extraction with hexane, methanol and ethanol benzene rendered t...