Dynamic energy absorption and perforation of ductile structures

Abstract This article focuses on the energy absorption of structural systems and components subjected to extreme loadings which can arise from impact, explosion and various other dynamic events. The dynamic properties of high-strength steels are discussed briefly because they have been proposed for energy-absorbing systems and other components in place of the more common mild steel and aluminium alloys. An energy-absorbing effectiveness factor is proposed which compares the dynamic energy absorbed in a device with the energy consumed up to rupture in a uniaxial tensile test specimen, which is made from the same volume of the material. This dimensionless factor is examined for the axial impact loading of thin-walled tubes having several cross-sectional shapes and made from different materials. It transpires that the aluminium alloys are more effective than the mild and high-strength steels and that circular cylindrical shells are more effective than square tubes and thin-walled tubes having other cross-sectional shapes. The impact behaviour of pipelines, either empty or pressurised with a nitrogen gas, is studied when struck transversely by relatively large rigid masses travelling up to 10.4 m/s. The initial impact energy produces large inelastic ductile deformations of the pipeline, and, in some cases, failure. The results are compared with several empirical equations and comments are made on their accuracy. Some recent experimental test data are reported on the perforation of mild steel plates struck by relatively heavy masses travelling up to about 13 m/s. The projectiles have blunt, conical and hemispherical impact faces and strike initially flat plates clamped around circular, square and rectangular boundaries. The perforation energies are compared with empirical equations.

[1]  Norman Jones,et al.  Some Phenomena in the structural crashworthiness field , 1999 .

[2]  Norman Jones,et al.  Experimental and numerical study in axial crushing of thin walled sections made of high-strength steels , 2003 .

[3]  O. Hopperstad,et al.  Experimental investigations on the behaviour of short to long square aluminium tubes subjected to axial loading , 2004 .

[4]  Z. Lin,et al.  Dynamic axial crushing of stainless steel and mild steel square tubes , 2000 .

[5]  Norman Jones,et al.  Low-velocity impact of pressurised pipelines , 2010 .

[6]  Ali Limam,et al.  Experimental and numerical investigation of static and dynamic axial crushing of circular aluminum tubes , 2004 .

[7]  Tongxi Yu,et al.  Dynamic Models for Structural Plasticity , 1993 .

[8]  Norman Jones,et al.  Determination of Crash-Relevant Material Properties for High-Strength Steels and Constitutive Equations , 2002 .

[9]  Norman Jones,et al.  On the Scaling of Low-Velocity Perforation of Mild Steel Plates , 2008 .

[10]  W Q Shen,et al.  A theoretical analysis on the failure of unpressurized and pressurized pipelines , 2002 .

[11]  M. Alves,et al.  MATERIAL CONSTITUTIVE LAW FOR LARGE STRAINS AND STRAIN RATES. TECHNICAL NOTE , 2000 .

[12]  Norman Jones,et al.  Dynamic progressive buckling of circular and square tubes , 1986 .

[13]  Dong-Kuk Kim,et al.  Impact energy absorption of 6061 aluminum extruded tubes with different cross-sectional shapes , 1999 .

[14]  Norman Jones,et al.  Impact failure of beams using damage mechanics: Part II—Application , 2002 .

[15]  R. S. Birch,et al.  Low velocity perforation design of metal plates , 2006 .

[16]  G. T. Singley,et al.  DYNAMIC RESPONSE OF STRUCTURES. , 1972 .

[17]  Norman Jones,et al.  Influence of spot-weld failure on crushing of thin-walled structural sections , 2003 .

[18]  Norman Jones.  Determination of Crash-Relevant Material Properties of Dual-Phase and Trip Steels , 2003 .

[19]  O. Hopperstad,et al.  Static and dynamic axial crushing of square thin-walled aluminium extrusions , 1996 .

[20]  N. Jones,et al.  Inertia effects in axisymmetrically deformed cylindrical shells under axial impact , 2000 .

[21]  W. Abramowicz,et al.  Transition from initial global bending to progressive buckling of tubes loaded statically and dynamically , 1997 .

[22]  Norman Jones,et al.  Influence of Internal Pressure on the Impact Behavior of Steel Pipelines , 1996 .

[23]  Norman Jones,et al.  Influence of stress waves on the dynamic progressive and dynamic plastic buckling of cylindrical shells , 2001 .

[24]  William James Stronge,et al.  Spherical missile impact and perforation of filled steel tubes , 1985 .

[25]  N Jones,et al.  A Theoretical Study of the Lateral Impact of Fully Clamped Pipelines , 1992 .

[26]  S S Hsu,et al.  Quasi-static And Dynamic Axial Crushing Of Circular And Square Stainless Steel Tubes , 2002 .

[27]  W. Q. Shen,et al.  Further experimental study on the failure of fully clamped steel pipes , 1998 .

[28]  Mark White,et al.  A theoretical analysis for the quasi-static axial crushing of top-hat and double-hat thin-walled sections , 1999 .

[29]  O. Hopperstad,et al.  Static and dynamic crushing of square aluminium extrusions with aluminium foam filler , 2000 .

[30]  Norman Jones,et al.  On the mechanics of the global bending collapse of circular tubes under dynamic axial load—Dynamic buckling transition , 2008 .

[31]  N. Jones,et al.  Experimental Investigation into the Dynamic Plastic Response and Perforation of a Clamped Circular Plate Struck Transversely by a Mass , 1994 .

[32]  G. Nurick,et al.  Numerical investigation of the response of sandwich-type panels using thin-walled tubes subject to blast loads , 2007 .

[33]  S. Reid,et al.  METALLIC ENERGY DISSIPATING SYSTEMS. , 1978 .

[34]  Norman Jones,et al.  Quasi-static and dynamic axial crushing of thin-walled circular stainless steel, mild steel and aluminium alloy tubes , 2004 .

[35]  Norman Jones,et al.  Impact Behaviour Of Pressurised Pipelines , 2008 .

[36]  Norman Jones,et al.  Impact of thin-walled high-strength steel structural sections , 2004 .

[37]  Norman Jones,et al.  An Experimental Study on the Lateral Impact of Fully Clamped Mild Steel Pipes , 1992 .

[38]  Enboa Wu,et al.  AXIAL CRUSH OF METALLIC HONEYCOMBS , 1997 .

[39]  N Jones,et al.  Inelastic failure of fully clamped beams and circular plates under impact loading , 2002 .

[40]  Norman Jones,et al.  Observations on the design and modelling of some joined thin-walled structural sections , 2008 .