On the effects of hot spot formation during MW-assisted synthesis of Cf/SiC composites by reactive melt infiltration: Experimental simulations through high temperature treatments

[1]  N. Frage,et al.  Reaction‐bonded B 4 C/SiC composites synthesized by microwave heating , 2019, International Journal of Applied Ceramic Technology.

[2]  S. Biamino,et al.  Graphite-Si-SiC ceramics produced by microwave assisted reactive melt infiltration , 2019, Journal of the European Ceramic Society.

[3]  J. Narciso,et al.  Key Parameters in the Manufacture of SiC-Based Composite Materials by Reactive Melt Infiltration , 2019, Materials.

[4]  T. Yano,et al.  Fabrication and bending behavior of amorphous SiC-fiber-reinforced Si-Co eutectic alloy composites at elevated temperatures , 2019, Composites Part B: Engineering.

[5]  L. Cornolti,et al.  Microwave heating controlled reactive melt infiltration for graphite‐Si‐SiC ceramics manufacturing , 2018, Journal of the American Ceramic Society.

[6]  N. Gupta,et al.  Reactive melt infiltration as synthesis route for enhanced SiC/CoSi2 composite materials for advanced armor systems , 2018, Ceramics International.

[7]  J. Narciso,et al.  Manufacture of SiC/ZrSi2 Composite Materials: Assessing Thermal Compatibility Between Matrix and Reinforcement , 2017 .

[8]  J. Narciso,et al.  Effect of Vacuum on Microstructure and Mechanical Properties of Silicon Carbide Produced by Reactive Infiltration , 2017 .

[9]  F. Rodríguez-Reinoso,et al.  Porosity Effect on Thermal Properties of Al-12 wt % Si/Graphite Composites , 2017, Materials.

[10]  J. Narciso,et al.  Effects of Fe addition on the mechanical and thermo-mechanical properties of SiC/FeSi2/Si composites produced via reactive infiltration , 2016 .

[11]  Jaegeun Lee,et al.  Full graphitization of amorphous carbon by microwave heating , 2016 .

[12]  J. Narciso,et al.  Towards optimization of SiC/CoSi2 composite material manufacture via reactive infiltration: Wetting study of Si–Co alloys on carbon materials , 2015 .

[13]  P. Vavassori,et al.  Reactive silicon infiltration of carbon bonded preforms embedded in powder field modifiers heated by microwaves , 2015 .

[14]  J. Rouzaud,et al.  Influence of the inherent metal species on the graphitization of methane-based carbon nanofibers , 2012 .

[15]  J. Nuth,et al.  Vapor Pressure and Evaporation Coefficient of Silicon Monoxide over a Mixture of Silicon and Silica , 2012 .

[16]  B. Desmet,et al.  Thermal levels and subsurface damage induced by the occurrence of hot spots during high-energy braking , 2011 .

[17]  M. Martínez-Escandell,et al.  Manufacture of Biomorphic SiC Components with Homogeneous Properties from Sawdust by Reactive Infiltration with Liquid Silicon , 2010 .

[18]  M. Martínez-Escandell,et al.  The combined effect of porosity and reactivity of the carbon preforms on the properties of SiC produced by reactive infiltration with liquid Si , 2009 .

[19]  Xin-bo He,et al.  Effect of porosity on wear resistance of SiCp/Cu composites prepared by pressureless infiltration , 2008 .

[20]  A. Mortensen,et al.  Thermal conductivity of Al–SiC composites with monomodal and bimodal particle size distribution , 2008 .

[21]  Zhenping Zhu,et al.  Effect of microstructure on the mechanical properties of PAN-based carbon fibers during high-temperature graphitization , 2008, Journal of Materials Science.

[22]  W. Krenkel,et al.  C/C–SiC composites for space applications and advanced friction systems , 2005 .

[23]  H. Verweij,et al.  Influence of Porosity on Friction and Wear of Tetragonal Zirconia Polycrystal , 2005 .

[24]  D. Jiang,et al.  The effect of porous carbon preform and the infiltration process on the properties of reaction-formed SiC , 2004 .

[25]  Przemyslaw Zagrodzki,et al.  Generation of hot spots in a wet multidisk clutch during short-term engagement , 2003 .

[26]  P. Berçot,et al.  Hardness, friction and wear characteristics of nickel-SiC electroless composite deposits , 2001 .

[27]  Koji Kato,et al.  Wear in relation to friction — a review , 2000 .

[28]  Timothy D. Burchell,et al.  High-thermal-conductivity, mesophase-pitch-derived carbon foams: effect of precursor on structure and properties , 2000 .

[29]  F. Rodríguez-Reinoso,et al.  Textural and chemical characterization of microporous carbons , 1998 .

[30]  R. Munro.  Material Properties of a Sintered α-SiC , 1997 .

[31]  Y. Chiang,et al.  Reaction-formed silicon carbide , 1991 .

[32]  R. A. Knapp,et al.  Hot spotting in automotive friction systems , 1990 .

[33]  W. Ruland,et al.  The influence of graphitization on the mechanical properties of carbon fibers , 1980 .

[34]  A. Searcy,et al.  Vapor Pressure of Silicon and the Dissociation Pressure of Silicon Carbide , 1961 .

[35]  B. Warren,et al.  An X‐Ray Study of Carbon Black , 1942 .