Effects of Footing Size and Aspect Ratio on the Bearing Capacity of Sand Subjected to Eccentric Loading

The current practice of estimating bearing capacity usually employs the conventional bearing capacity formula originally developed for strip footings under vertical central loading. In order to account for the effect of footing shape and eccentricity and inclination of loads, correction factors are introduced in the formula, which are derived based on a number of small-scale model test observations. This paper describes research on the bearing capacity of rectangular footings on sand subjected to vertical eccentric loading. Two aspects, namely the effects of footing size and of footing shape on the bearing capacity and deformation characteristics, are focused on. A series of loading tests was conducted in a centrifuge on rectangular footings with aspect ratios from 1 to 5, at two different centrifugal accelerations. In addition, finite element analyses were performed in which factors influencing the angle of shear resistance including stress level dependency, anisotropy and coefficient of intermediate principal stress, were taken into account. It was found that the shape factor of footing apparently increased with increasing footing width. This indicates that the shape factor used in the current practice underestimates bearing capacity of footings. This was also the case for failure locus in the M/B-V (moment-vertical) load plane. Normalized failure locus for wider footings with a smaller aspect ratio is considerably larger than that reported in the literature. The stress level dependency of the angle of shear resistance appeared to be responsible for the scale effects of footings on the failure locus.

[1]  G. G. Meyerhof.  The Ultimate Bearing Capacity of Foudations , 1951 .

[2]  O. C. Zienkiewicz,et al.  Reduced integration technique in general analysis of plates and shells , 1971 .

[3]  Mitsu Okamura,et al.  A DISPLACEMENT PREDICTION METHOD FOR RETAINING WALLS UNDER SEISMIC LOADING , 2002 .

[4]  De Beer,et al.  THE SCALE EFFECT ON THE PHENOMENON OF PROGRESSIVE RUPTURE IN COHESIONLESS SOILS , 1965 .

[5]  Jiro Takemura,et al.  A STUDY ON BEARING CAPACITIES OF SHALLOW FOOTINGS ON SAND , 1993 .

[6]  George Geoffrey Meyerhof,et al.  Some recent research on the bearing capacity of foundations , 1963 .

[7]  Aleksandar S. Vesic,et al.  Analysis of Ultimate Loads of Shallow Foundations , 1973 .

[8]  Bruce L. Kutter,et al.  Strength Parameters for Bearing Capacity of Sand , 1988 .

[9]  Fumio Tatsuoka,et al.  Effects of Initial Anisotropic Fabric and σ2 On Strength and Deformation Characteristics of Sand , 1988 .

[10]  Guido Gottardi,et al.  A complete three-dimensional failure envelope for shallow footings on sand , 1994 .

[11]  Masanobu Oda,et al.  EFFECT OF STRENGTH ANISOTROPY ON BEARING CAPACITY OF SHALLOW FOOTING IN A DENSE SAND , 1979 .

[12]  Gerd Gudehus,et al.  INFLUENCE OF THE FOUNDATION WIDTH ON THE BEARING CAPACITY FACTOR , 1988 .

[13]  Fumio Tatsuoka,et al.  Strength and deformation characteristics of saturated sand at extremely low pressures , 1984 .

[14]  O. C. Zienkiewicz,et al.  VISCO-PLASTICITY--PLASTICITY AND CREEP IN ELASTIC SOLIDS--A UNIFIED NUMERICAL SOLUTION APPROACH , 1974 .

[15]  A. N. Schofield,et al.  THEORETICAL MODELLING OF SPUDCAN BEHAVIOUR UNDER COMBINED LOAD , 1997 .

[16]  Guido Gottardi,et al.  THE DISPLACEMENT OF A MODEL RIGID SURFACE FOOTING ON DENSE SAND UNDER GENERAL PLANAR LOADING , 1995 .

[17]  Hakuju Yamaguchi,et al.  On the influence of progressive failure on the bearing capacity of shallow foundations in dense sand , 1976 .

[18]  Makoto Sakamoto,et al.  STRENGTH AND DEFORMATION CHARACTERISTICS OF SAND IN PLANE STRAIN COMPRESSION AT EXTREMELY LOW PRESSURES , 1986 .

[19]  Osamu Kusakabe,et al.  ON THE EFFECT OF ANISOTROPY ON BEARING CAPACITY AND DEFORMATION OF SAND , 1982 .

[20]  K. Terzaghi.  Theoretical Soil Mechanics , 1943 .

[21]  Mukesh Gupta,et al.  Settlement of Shallow Foundations on Sand , 1994 .

[22]  O. Kusakabe,et al.  GEOTECHNICAL MODEL TESTS OF BEARING CAPACITY PROBLEMS IN A CENTRIFUGE , 1985 .

[23]  Michael C. Georgiadis,et al.  DISPLACEMENTS OF FOOTINGS ON SAND UNDER ECCENTRIC AND INCLINED LOADS , 1988 .

[24]  E. Beer,et al.  Experimental Determination of the Shape Factors and the Bearing Capacity Factors of Sand , 1970 .

[25]  Fumio Tatsuoka,et al.  Progressive Failure and Particle Size Effect in Bearing Capacity of a Footing on Sand , 1991 .

[26]  R. Lewis,et al.  Associated and non-associated visco-plasticity and plasticity in soil mechanics , 1975 .

[27]  Gregory B. Baecher,et al.  Uncertainty in Bearing Capacity of Sands , 1983 .

[28]  Guy T. Houlsby,et al.  Combined loading of spudcan foundations on clay: laboratory tests , 2000 .

[29]  R. Borst,et al.  POSSIBILITIES AND LIMITATIONS OF FINITE ELEMENTS FOR LIMIT ANALYSIS , 1984 .