Numerical investigation and an effective modelling on the Selective Laser Melting (SLM) process with aluminium alloy 6061

Abstract The Selective Laser Melting (SLM) fabrication process is complex and it is crucial to understand the phenomena that will occur to better control it. In this paper, an FE model on SLM that considers powder-to-solid transition together with an effective method to achieve volume shrinkage and material removal has been created. Experiments were conducted to validate the model. A detailed discussion on the progression of the melt pool and the rate of temperature change has been made. Parametric study with the laser power and scan speed as variables has been conducted to identify their relationships with the melt dimensions, melting and evaporation of powder and rates of temperature change.

[1]  W. Yeong,et al.  Selective Laser Melting of aluminium alloy using a uniform beam profile , 2014 .

[2]  Yu Wang,et al.  Characterization of an iron-based laser sintered material , 2006 .

[3]  M. Baelmans,et al.  Solutions for modelling moving heat sources in a semi-infinite medium and applications to laser material processing , 2007 .

[4]  Michael J. Cima,et al.  Three Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model , 1992 .

[5]  Andrey V. Gusarov,et al.  Mechanisms of selective laser sintering and heat transfer in Ti powder , 2003 .

[6]  Xin Sun,et al.  Simulation of the densification of semicrystalline polymer powders during the selective laser sintering process: Application to Nylon 12 , 2008 .

[7]  K. Osakada,et al.  Flexible manufacturing of metallic products by selective laser melting of powder , 2006 .

[8]  Tom Craeghs,et al.  A pragmatic model for selective laser melting with evaporation , 2009 .

[9]  Vinod Yadava,et al.  Finite element analysis of temperature distribution in single metallic powder layer during metal laser sintering , 2007 .

[10]  L. Papadakis,et al.  A computational reduction model for appraising structural effects in selective laser melting manufacturing , 2014 .

[11]  Yong-qiang Yang,et al.  Research on track overlapping during Selective Laser Melting of powders , 2012 .

[12]  Ryan B. Wicker,et al.  3D printer selection: A decision-making evaluation and ranking model , 2013 .

[13]  C. Yan,et al.  Investigation and development of large-scale equipment and high performance materials for powder bed laser fusion additive manufacturing , 2014 .

[14]  Robby Ebert,et al.  Laser micro sintering: A new method to generate metal and ceramic parts of high resolution with sub-micrometer powder , 2008 .

[15]  Rémy Glardon,et al.  3D FE simulation for temperature evolution in the selective laser sintering process , 2004 .

[16]  G. K. Lewis,et al.  Practical considerations and capabilities for laser assisted direct metal deposition , 2000 .

[17]  Jie Yin,et al.  Simulation of temperature distribution in single metallic powder layer for laser micro-sintering , 2012 .

[18]  D. Gu,et al.  Selective laser melting of novel nanocomposites parts with enhanced tribological performance , 2013 .

[19]  Han Guoming,et al.  Dynamic simulation of the temperature field of stainless steel laser welding , 2007 .

[20]  R. Taylor,et al.  Thermophysical properties of molten aluminium alloys , 1998 .

[21]  Konrad Wissenbach,et al.  Individualized production by means of high power Selective Laser Melting , 2010 .

[22]  D. Mynors,et al.  A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing , 2009 .

[23]  Brian Mellor,et al.  Multiple material additive manufacturing – Part 1: a review , 2013 .

[24]  Michael F. Zäh,et al.  Investigations on residual stresses and deformations in selective laser melting , 2010, Prod. Eng..

[25]  Christopher J. Sutcliffe,et al.  Selective laser melting of aluminium components , 2011 .

[26]  L. Shaw,et al.  Thermal and mechanical finite element modeling of laser forming from metal and ceramic powders , 2004 .

[27]  Jinhui Liu,et al.  Select laser melting of W–Ni–Fe powders: simulation and experimental study , 2010 .

[28]  J. Kruth,et al.  Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting , 2011 .

[29]  E. Brandl,et al.  Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior , 2012 .

[30]  L. Froyen,et al.  Selective laser melting of iron-based powder , 2004 .

[31]  André Luiz Jardini,et al.  Customised titanium implant fabricated in additive manufacturing for craniomaxillofacial surgery , 2014 .

[32]  S. Ahzi,et al.  Three-dimensional transient finite element analysis of the selective laser sintering process , 2009 .

[33]  Richard M. Everson,et al.  Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting , 2013 .

[34]  Pradip Majumdar,et al.  A Green’s function model for the analysis of laser heating of materials , 2007 .

[35]  K. Osakada,et al.  Finite element analysis of single layer forming on metallic powder bed in rapid prototyping by selective laser processing , 2002 .

[36]  B. Yilbas,et al.  Laser Pulse Heating of Steel Surface: Consideration of Phase-Change Process , 2006 .

[37]  T. Childs,et al.  Selective laser sintering (melting) of stainless and tool steel powders: Experiments and modelling , 2005 .