A New On-Chip Substrate-Coupled Inductor Model Implemented With Scalable Expressions

Accurate modeling of the on-chip inductor is essential for the design of high-speed, low-power, and low-noise radio-frequency integrated circuits. The conventional model has a measurable discrepancy as the current flowing in the substrate is not correctly considered. The substrate-coupled inductor model, however, considers the losses generated in both the vertical and horizontal directions. This model gives an intelligent explanation of the reduction in equivalent resistance between terminals with increasing frequency as well as the inductance and quality factor (Q-factor). In order to implement a fully scalable model, the circuit elements in the substrate-coupled inductor model are expressed as monomial equations in terms of physical geometry. These equations consider the physical implications of the parameters as well as employing a mathematical fit for extrapolation. Measurements are made on inductors fabricated using a standard 0.35-mum CMOS process and a 0.15-mum silicon-on-insulator CMOS process to successfully verify this model.

[1]  J. Long,et al.  The modeling, characterization, and design of monolithic inductors for silicon RF IC's , 1997, IEEE J. Solid State Circuits.

[2]  John R. Long,et al.  Modeling, Characterization and Design of Monolithic Inductors , 1996 .

[3]  Stephen P. Boyd,et al.  Simple accurate expressions for planar spiral inductances , 1999, IEEE J. Solid State Circuits.

[4]  N. M. Ibrahim,et al.  Analysis of current crowding effects in multiturn spiral inductors , 2001 .

[5]  Yu Cao,et al.  Frequency-independent equivalent circuit model for on-chip spiral inductors , 2002, Proceedings of the IEEE 2002 Custom Integrated Circuits Conference (Cat. No.02CH37285).

[6]  Ban-Leong Ooi,et al.  An improved prediction of series resistance in spiral inductor modeling with eddy-current effect , 2002 .

[7]  Sanjay Raman,et al.  Quality factor and inductance in differential IC implementations , 2002 .

[8]  M. Fujishima,et al.  Accurate subcircuit model of an on-chip inductor with a new substrate network , 2004, 2004 Symposium on VLSI Circuits. Digest of Technical Papers (IEEE Cat. No.04CH37525).

[9]  T.H. Lee,et al.  A physical model for planar spiral inductors on silicon , 1996, International Electron Devices Meeting. Technical Digest.

[10]  A. Weisshaar,et al.  A new wideband compact model for spiral inductors in RFICs , 2002, IEEE Electron Device Letters.

[11]  Ali M. Niknejad,et al.  Numerically stable Green function for modeling and analysis of substrate coupling in integrated circuits , 1998, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[12]  S. Wong,et al.  Physical modeling of spiral inductors on silicon , 2000 .

[13]  Egidio Ragonese,et al.  A lumped scalable physics-based model for silicon spiral inductors , 2002, The 10th IEEE International Symposium on Electron Devices for Microwave and Optoelectronic Applications.

[14]  Ali M. Niknejad,et al.  Analysis, design, and optimization of spiral inductors and transformers for Si RF ICs , 1998, IEEE J. Solid State Circuits.

[15]  D. P. Neikirk,et al.  Compact equivalent circuit model for the skin effect , 1996, 1996 IEEE MTT-S International Microwave Symposium Digest.

[16]  M.T. Yang,et al.  Characterization and model of high quality factor and broadband integrated inductor on Si-substrate , 2003, IEEE MTT-S International Microwave Symposium Digest, 2003.