Selection of carbon materials and modification methods in low-temperature sintering flue gas denitrification

[1]  M. S. Akhtar,et al.  Improvement in the surface properties of activated carbon via steam pretreatment for high performance supercapacitors , 2017 .

[2]  Qian Wang,et al.  Study on enhancement mechanism of NO absorption in K2FeO4 solution basing on mass transfer-reaction theory , 2016 .

[3]  Guoqiang Ma,et al.  On the nature of oxygen groups for NH3-SCR of NO over carbon at low temperatures , 2015 .

[4]  Z. Li,et al.  Influence study of oxygen in the flue gas on physical and chemical properties of activated carbon under microwave irradiation , 2015 .

[5]  Jian Yang,et al.  Synergy of KCl and Hgel on selective catalytic reduction of NO with NH3 over V2O5–WO3/TiO2 catalysts , 2015 .

[6]  Zuotai Zhang,et al.  In situ DRIFTS investigation on the SCR of NO with NH3 over V2O5 catalyst supported by activated semi-coke , 2014 .

[7]  Yue Liu,et al.  The role of cerium in the improved SO2 tolerance for NO reduction with NH3 over Mn-Ce/TiO2 catalyst at low temperature , 2014 .

[8]  Zhichun Si,et al.  Influences of impregnation procedure on the SCR activity and alkali resistance of V2O5–WO3/TiO2 catalyst , 2013 .

[9]  Y. Adewuyi,et al.  Simultaneous Absorption and Oxidation of Nitric Oxide and Sulfur Dioxide by Aqueous Solutions of Sodium Persulfate Activated by Temperature , 2013 .

[10]  M. Kim,et al.  A commercial V2O5-WO3/TiO2 catalyst used at an NH3-SCR deNOx process in an oil-fired power plant: cause of an increase in deNOxing and NH3 oxidation performances at low temperatures , 2011 .

[11]  Zengying Liang,et al.  The energy consumption and environmental impacts of SCR technology in China , 2011 .

[12]  H. Tan,et al.  Removal of NO from flue gas by wet scrubbing with NaClO2/(NH2)2CO solutions , 2009 .

[13]  R. Moliner,et al.  Carbon-based catalytic briquettes for the reduction of NO: Effect of H2SO4 and HNO3 carbon support treatment , 2008 .

[14]  J. Shangguan,et al.  Surface characterization and SO2 removal activity of activated semi-coke with heat treatment , 2008 .

[15]  W. Yuan,et al.  Characterization of surface oxygen complexes on carbon nanofibers by TPD, XPS and FT-IR , 2007 .

[16]  Jia Yan-qiu.  Influence of Nitric Acid Modification on the Properties of Activated Carbon , 2006 .

[17]  J. A. Menéndez,et al.  Preparation and modification of activated carbon fibres by microwave heating , 2004 .

[18]  H. Teng,et al.  Nitrogen-containing carbons from phenol-formaldehyde resins and their catalytic activity in NO reduction with NH3 , 2003 .

[19]  H. Boehm.,et al.  Surface oxides on carbon and their analysis: a critical assessment , 2002 .

[20]  H. Teng,et al.  Reduction of NO with NH3 over carbon catalysts the effects of treating carbon with H2SO4 and HNO3 , 2001 .

[21]  Pio Forzatti,et al.  Selective catalytic reduction (SCR) of NO by NH3 over TiO2-supported V2O5–WO3 and V2O5–MoO3 catalysts , 2000 .

[22]  Zhenyu Liu,et al.  A novel carbon-supported vanadium oxide catalyst for NO reduction with NH3 at low temperatures , 1999 .

[23]  Bernard Delmon,et al.  Catalytic removal of NO , 1998 .

[24]  Y. S. Tarng,et al.  Design optimization of cutting parameters for turning operations based on the Taguchi method , 1998 .

[25]  R. Baker,et al.  Characterization of activated carbon, graphitized carbon fibers and synthetic diamond powder using TPD and DRIFTS , 1998 .

[26]  M. Trombetta,et al.  Characterization and composition of commercial V2O5zWO3zTiO2 SCR catalysts , 1996 .

[27]  F. Nakajima,et al.  The state-of-the-art technology of NOx control , 1996 .

[28]  F. Derbyshire,et al.  Catalytic reduction of nitric oxide over activated carbons , 1993 .