论文信息 - CURRENT TERTIARY OIL RECOVERY IN CHINA

CURRENT TERTIARY OIL RECOVERY IN CHINA

I . Introduction 2. Microemulsion/Polymer Flooding 2.1 General Situation of the L Reservoir of Laojunmiao Oil Field 2.2 Properties of Fluid in the Reservoir 2.3 Sodium Petroleum Sulfonate 2.4 Study of Optimum Flooding Fornulation 2.5 Pseudo-tertiary Diagram of YM-3A 2.6 Phase Behavior and Synergism among the Compositions of YM-3A 2.7 Study of Adsorption Losses of Petroleum Sulfonate and the Inhibitor 2.8 Study of Matching Property between Surfactant Flooding System and Polymer Solution 2.9 Oil-Displacing Test of MicroemulsionPolymer in Physical Model 3. PolymerFlooding 3.1 Polymer Solution Behavior 3.2 Thickening Property

[1] Donald L. Kuehne,et al. Improving chemical flood efficiency with micellar/alkaline/polymer processes , 1989 .

[2] E. H. Mayer,et al. Alkaline Injection for Enhanced Oil Recovery - A Status Report , 1983 .

[3] J. J. Taber,et al. Dynamic and static forces required to remove a discontinuous oil phase from porous media containing both oil and water , 1969 .

[4] Yan‐Hua Huang,et al. The mechanism of adsorption and a new method to reduce surfactant loss in chemical flooding , 1989 .

[5] Dinesh O. Shah,et al. Surface Phenomena in Enhanced Oil Recovery , 1981 .

[6] R. L. Reed,et al. Multiphase Microemulsion Systems , 1976 .

[7] Q. Shen,et al. DETERMINATION OF THE OPTIMUM COMPOSITION OF MIDDLE-PHASE MICROEMULSION USING THE ORTHOGONAL-TEST-DESIGN METHOD , 1999 .

[8] R. S. Schechter,et al. Improved Oil Recovery by Surfactant and Polymer Flooding , 1977 .

[9] R. S. Schechter,et al. The application of low interfacial tension scaling rules to binary hydrocarbon mixtures , 1977 .