Fire performance assessment of HPLWC hollow core slabs through full-scale furnace testing

Abstract High-Performance Light-Weight Concrete (HPLWC) is used for many structural applications when superior strength and low self-weight of the structural components are required. Among these applications there are thin floor structures, like hollow core slabs, that require characteristics of lightness, relatively high resistance and superior durability. Although the fire performance of normal strength concrete hollow core slabs has been extensively studied, the behavior of HPLWC hollow core slabs has not been suitably investigated. The paper reports the results of two full-scale furnace tests on HPLWC hollow core slabs. Each of them involved one panel with an applied load and one without load. The evolution of temperature inside the slabs was measured along with the load bearing capacity under fire conditions. During the first test severe spalling occurred in the loaded slab while during the second one, performed on slabs cured for some months under dry conditions, spalling did not occur. Finite elements simulations were also carried out in order to support the interpretation of the experimental results. Experimental and numerical investigations gave insight into the fire performance of HPLWC hollow core slabs and highlighted the influence of dry curing conditions in reducing the spalling and increasing the fire resistance.

[1]  Jen-Hao Chi,et al.  Fire-resistance property of reinforced lightweight aggregate concrete wall , 2012 .

[2]  A W Beeby,et al.  CONCISE EUROCODE FOR THE DESIGN OF CONCRETE BUILDINGS. BASED ON BSI PUBLICATION DD ENV 1992-1-1: 1992. EUROCODE 2: DESIGN OF CONCRETE STRUCTURES. PART 1: GENERAL RULES AND RULES FOR BUILDINGS , 1993 .

[3]  K. Kovler,et al.  Pre-Soaked Lightweight Aggregates as Additives for Internal Curing of High-Strength Concretes , 2004 .

[4]  T. Lennon,et al.  Full-scale fire tests on hollowcore floors , 2008 .

[5]  Rajesh P. Dhakal,et al.  Connections on Hollow-Core Floor Systems for Enhanced Fire Performance , 2008 .

[6]  K. F. Chung,et al.  Composite column design to Eurocode 4 : based on DD ENV 1994-1-1: 1994 Eurocode 4: design of composite steel and concrete structures: part 1.1: general rules and rules for buildings , 1994 .

[7]  J.H.H. Fellinger,et al.  Shear and Anchorage Behaviour of Fire Exposed Hollow Core Slabs , 2004 .

[8]  Rajesh P. Dhakal,et al.  Effect of Aspect Ratio on Fire Resistance of Hollow Core Concrete Floors , 2009 .

[9]  Mario Fontana,et al.  Structural Behaviour of Slim Floor Slabs with Prestressed Hollow Core Elements at Room Temperature and in Fire , 2002 .

[10]  Manuel L. Romero,et al.  Influence of reinforcement arrangement in flexural fire behavior of hollow core slabs , 2012 .

[11]  Luis Hernandez,et al.  Use of High Strength Lightweight Concrete to Construct a Postensioned Segmental Beam , 2010 .

[12]  Rajesh P. Dhakal,et al.  Simple method for modelling hollowcore concrete slabs under fire , 2006 .

[13]  Annibale Luigi Materazzi,et al.  Residual strength of R.C. buildings after a fire: A case study , 2008 .

[14]  Rajesh P. Dhakal,et al.  Fire resistance modelling of prestressed concrete hollowcore floors using multi-spring connection elements , 2010 .

[15]  Rajesh P. Dhakal,et al.  Modelling the Fire Resistance of Prestressed Concrete Floors using Multi-Spring Connection Elements , 2012 .

[16]  A. W. Beeby,et al.  Designers Guide to EN 1992-1-1 and EN 1992-1-2 Eurocode 2: Design of Concrete Structures. General rules and rules for buildings and structural fire design , 2005 .

[17]  P. J. E. Sullivan,et al.  The performance of concrete at elevated temperatures (as measured by the reduction in compressive strength) , 1992 .

[18]  A. Van Acker.  Shear resistance of prestressed hollow core floors exposed to fire , 2003 .

[19]  Rajesh P. Dhakal,et al.  Hollow-core concrete slabs exposed to fire , 2008 .