Stability of PVDF hollow fibre membranes in sodium hydroxide aqueous solution

Abstract The stability of PVDF hollow fibre membranes in sodium hydroxide (NaOH) aqueous solutions were investigated in this study. PVDF hollow fibre membranes were prepared from each of the three commercial raw PVDF materials (Kynar 761, Solef 1015 and Solef 6010) from two major suppliers (Atofina Chemicals Inc., USA and Solvay, Belgium) for comparison purposes. The effect of NaOH concentration, treatment time and temperature on mechanical properties, thermal properties and crystalline structure of the PVDF hollow fibre membranes were investigated through mechanical strength measurement, surface area analysis, XRD, FTIR and DSC analyses. The obtained results indicate that the reaction between PVDF and NaOH was initiated even at low concentrations of NaOH and was aggravated with the extended treatment time, resulting in the decrease in mechanical strength and crystallinity of PVDF hollow fibre membranes. The reaction was accelerated and intensified by increasing the concentration of NaOH and/or treatment temperature. At 70 °C, the mechanical integrity of the PVDF membranes was completely destroyed in 4 wt% NaOH solution within 24 h or in 10 wt% NaOH solution within 8 h. The deterioration of stability in NaOH solutions is considered universal for all PVDF employed in this study, irrespective of the raw materials or the corresponding hollow fibre membranes.

[1]  F. Vigo,et al.  Mechanical, chemical and bacterial resistance of modified polyvinylidene fluoride membranes suitable for ultrafiltration of oily emulsions , 1984 .

[2]  D. Bassett,et al.  Developments in crystalline polymers , 1982 .

[3]  M. Urban,et al.  Structural and Quantitative Analysis of Surface Modified Poly(vinylidene Fluoride) Films Using ATR FT-IR Spectroscopy , 1987 .

[4]  M. Wegener,et al.  Poling Behavior and Optical Absorption of Partially Dehydrofluorinated and Uniaxially Stretched Polyvinylidene Fluoride , 2006 .

[5]  Y. Ishida,et al.  Annealing effects in poly(vinylidene fluoride) as revealed by specific volume measurements, differential scanning calorimetry, and electron microscopy , 1973 .

[6]  E. Drioli,et al.  Poly(vinylidene fluoride) membranes by phase inversion: the role the casting and coagulation conditions play in their morphology, crystalline structure and properties , 2007 .

[7]  H. Kise,et al.  Phase transfer catalysis in dehydrofluorination of poly(vinylidene fluoride) by aqueous sodium hydroxide solutions , 1983 .

[8]  R. Gregorio,et al.  Effect of crystalline phase, orientation and temperature on the dielectric properties of poly (vinylidene fluoride) (PVDF) , 1999 .

[9]  S. Hoa,et al.  Stress corrosion cracking of poly(vinylidene fluoride) in sodium hydroxide , 1983 .

[10]  Kang Li,et al.  Tailor‐made asymmetric PVDF hollow fibers for soluble gas removal , 1999 .

[11]  J. Mano,et al.  FTIR AND DSC STUDIES OF MECHANICALLY DEFORMED β-PVDF FILMS , 2001 .

[12]  Kang Li,et al.  A simplified method for preparation of hydrophilic PVDF membranes from an amphiphilic graft copolymer , 2009 .

[13]  R. Gregorio.  Determination of the α, β, and γ crystalline phases of poly(vinylidene fluoride) films prepared at different conditions , 2006 .

[14]  N. Jongen,et al.  Surface hydroxylation of poly(vinylidene fluoride) (PVDF) film , 1997 .

[15]  M. Litt,et al.  Poly(Vinylidene Fluoride). , 1977 .

[16]  Y. Komaki,et al.  Observation of Nuclear Track Development in Polyvinylidene Fluoride with Several Etchants , 1981 .

[17]  Hongzheng Chen,et al.  Journal of Polymer Science Part A-Polymer Chemistry , 2008 .

[18]  Haruka Shinohara.  Fluorination of polyhydrofluoroethylenes. II. Formation of perfluoroalkyl carboxylic acids on the surface region of poly(vinylidene fluoride) film by oxyfluorination, fluorination, and hydrolysis , 1979 .

[19]  B. S. Parekh,et al.  High Temperature Ultrafiltration With Kynar® Poly(Vinylidene Fluoride) Membranes , 1980 .

[20]  Quan‐Fu An,et al.  Morphology and Formation Mechanism of Poly(Vinylidene Fluoride) Membranes Prepared with Immerse Precipitation: Effect of Dissolving Temperature , 2009 .

[21]  A. Bottino,et al.  Characterization of PVDF membranes by vibrational spectroscopy , 2002 .

[22]  L. Cheng,et al.  Strong effect of precursor preparation on the morphology of semicrystalline phase inversion poly(vinylidene fluoride) membranes , 2006 .

[23]  J. Koenig,et al.  An infrared study of phase-III poly(vinylidene fluoride) , 1979 .

[24]  Kang Li,et al.  Isothermal phase diagrams and phase-inversion behavior of poly(vinylidene fluoride)/solvents/additives/water systems , 2003 .