Study and Handling Methods of Power IGBT Module Failures in Power Electronic Converter Systems

Power electronics plays an important role in a wide range of applications in order to achieve high efficiency and performance. Increasing efforts are being made to improve the reliability of power electronics systems to ensure compliance with more stringent constraints on cost, safety, and availability in different applications. This paper presents an overview of the major failure mechanisms of IGBT modules and their handling methods in power converter systems improving reliability. The major failure mechanisms of IGBT modules are presented first, and methods for predicting lifetime and estimating the junction temperature of IGBT modules are then discussed. Subsequently, different methods for detecting open- and short-circuit faults are presented. Finally, fault-tolerant strategies for improving the reliability of power electronic systems under field operation are explained and compared in terms of performance and cost.

[1]  Frede Blaabjerg,et al.  Catastrophic failure and fault-tolerant design of IGBT power electronic converters - an overview , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.

[2]  Teresa Orlowska-Kowalska,et al.  Advanced and Intelligent Control in Power Electronics and Drives , 2014 .

[3]  M. Liserre,et al.  Toward Reliable Power Electronics: Challenges, Design Tools, and Opportunities , 2013, IEEE Industrial Electronics Magazine.

[4]  Ying Zhu,et al.  A Fault-Tolerant Permanent-Magnet Traction Module for Subway Applications , 2014, IEEE Transactions on Power Electronics.

[5]  Mohammad Reza Zolghadri,et al.  FPGA-Based Reconfigurable Control for Fault-Tolerant Back-to-Back Converter Without Redundancy , 2013, IEEE Transactions on Industrial Electronics.

[6]  Rae-Young Kim,et al.  A novel fault detection circuit for short-circuit faults of IGBT , 2011, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[7]  Dehong Xu,et al.  Survey on Fault-Tolerant Techniques for Power Electronic Converters , 2014, IEEE Transactions on Power Electronics.

[8]  Frede Blaabjerg,et al.  Design for reliability of power electronic systems , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.

[9]  Jang-Mok Kim,et al.  Diagnosis and fault-tolerant control of 3-phase AC-DC PWM converter system , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[10]  Jan T. Bialasiewicz,et al.  Power-Electronic Systems for the Grid Integration of Renewable Energy Sources: A Survey , 2006, IEEE Transactions on Industrial Electronics.

[11]  Gerard Coquery,et al.  Investigation of the heel crack mechanism in Al connections for power electronics modules , 2011, Microelectron. Reliab..

[12]  F. Blaabjerg,et al.  Power electronics as efficient interface in dispersed power generation systems , 2004, IEEE Transactions on Power Electronics.

[13]  F.W. Fuchs,et al.  Performance of diagnosis methods for IGBT open circuit faults in three phase voltage source inverters for AC variable speed drives , 2005, 2005 European Conference on Power Electronics and Applications.

[14]  Mauro Ciappa,et al.  Selected failure mechanisms of modern power modules , 2002, Microelectron. Reliab..

[15]  Uwe Scheuermann,et al.  Impact of solder fatigue on module lifetime in power cycling tests , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[16]  Edison Roberto Cabral da Silva,et al.  Fault-tolerant voltage-fed PWM inverter AC motor drive systems , 2004, IEEE Transactions on Industrial Electronics.

[17]  Frede Blaabjerg,et al.  An overview of the reliability prediction related aspects of high power IGBTs in wind power applications , 2011, Microelectron. Reliab..

[18]  R. Miceli,et al.  A geometrical simple approach for power silicon devices fault detection and fault-tolerant operation of a voltage source inverter , 2012, 2012 XXth International Conference on Electrical Machines.

[19]  T.A. Lipo,et al.  Fault tolerant three-phase AC motor drive topologies: a comparison of features, cost, and limitations , 2003, IEEE Transactions on Power Electronics.

[20]  Dong-Seok Hyun,et al.  A Novel Short-Circuit Detecting Scheme Using Turn-On Switching Characteristic of IGBT , 2008, 2008 IEEE Industry Applications Society Annual Meeting.

[21]  E. Ribeiro,et al.  Fault-Tolerant Strategy for a Photovoltaic DC--DC Converter , 2013, IEEE Transactions on Power Electronics.

[22]  António J. Marques Cardoso,et al.  A Fault-Tolerant Direct Controlled PMSG Drive for Wind Energy Conversion Systems , 2014, IEEE Transactions on Industrial Electronics.

[23]  P. Mutschler,et al.  Fault-Tolerant Voltage Source Inverter for Permanent Magnet Drives , 2012, IEEE Transactions on Power Electronics.

[24]  Thierry Meynard,et al.  Survey on Fault Operation on Multilevel Inverters , 2010, IEEE Transactions on Industrial Electronics.

[25]  F. Blaabjerg,et al.  Method for Detecting an Open-Switch Fault in a Grid-Connected NPC Inverter System , 2012, IEEE Transactions on Power Electronics.

[26]  F.W. Fuchs,et al.  Performance of diagnosis methods for IGBT open circuit faults in voltage source active rectifiers , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[27]  June-Seok Lee,et al.  An Open-Switch Fault Detection Method and Tolerance Controls Based on SVM in a Grid-Connected T-Type Rectifier With Unity Power Factor , 2014, IEEE Transactions on Industrial Electronics.

[28]  R. S. Chokhawala,et al.  A discussion on IGBT short-circuit behavior and fault protection schemes , 1995 .

[29]  Shahram Karimi,et al.  FPGA-Based Real-Time Power Converter Failure Diagnosis for Wind Energy Conversion Systems , 2008, IEEE Transactions on Industrial Electronics.

[30]  Tsung-Yu Pan,et al.  Critical Accumulated Strain Energy (Case) Failure Criterion for Thermal Cycling Fatigue of Solder Joints , 1994 .

[31]  Wolfgang Fichtner,et al.  Lifetime prediction and design of reliability tests for high-power devices in automotive applications , 2003 .

[32]  C. M. Johnson,et al.  Physics-of-Failure Lifetime Prediction Models for Wire Bond Interconnects in Power Electronic Modules , 2013, IEEE Transactions on Device and Materials Reliability.

[33]  Jang-Mok Kim,et al.  Diagnosis and Fault-Tolerant Control of Three-Phase AC–DC PWM Converter Systems , 2013, IEEE Transactions on Industry Applications.

[34]  Sangshin Kwak,et al.  Fault-Tolerant Structure and Modulation Strategies With Fault Detection Method for Matrix Converters , 2010, IEEE Transactions on Power Electronics.

[35]  Janusz Nieznanski,et al.  Open-Transistor Fault Diagnostics in Voltage-Source Inverters by Analyzing the Load Currents , 2007, IEEE Transactions on Industrial Electronics.

[36]  Dawei Xiang,et al.  An Industry-Based Survey of Reliability in Power Electronic Converters , 2011, IEEE Transactions on Industry Applications.

[37]  Bin Lu,et al.  A Literature Review of IGBT Fault Diagnostic and Protection Methods for Power Inverters , 2008, 2008 IEEE Industry Applications Society Annual Meeting.

[38]  Uwe Scheuermann,et al.  The Road to the Next Generation Power Module - 100% Solder Free Design , 2008 .

[39]  R. Peuget,et al.  Fault detection and isolation on a PWM inverter by knowledge-based model , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[40]  K. Gopakumar,et al.  Three-level inverter configuration cascading two two-level inverters , 2003 .

[41]  Josef Lutz,et al.  Model for Power Cycling lifetime of IGBT Modules - various factors influencing lifetime , 2008 .

[42]  R. S. Chokhawala,et al.  Switching voltage transient protection schemes for high-current IGBT modules , 1997 .

[43]  M. Trabelsi,et al.  Multiple IGBTs open circuit faults diagnosis in voltage source inverter fed induction motor using modified slope method , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[44]  Amit Kumar Jain,et al.  $V_{CE}$ Sensing for IGBT Protection in NPC Three Level Converters—Causes For Spurious Trippings and Their Elimination , 2011, IEEE Transactions on Power Electronics.

[45]  U. Scheuermann,et al.  Separating Failure Modes in Power Cycling Tests , 2012, 2012 7th International Conference on Integrated Power Electronics Systems (CIPS).

[46]  Guna S Selvaduray,et al.  Solder joint fatigue models: review and applicability to chip scale packages , 2000 .

[47]  Frede Blaabjerg,et al.  Modulation Methods for Neutral-Point-Clamped Wind Power Converter Achieving Loss and Thermal Redistribution Under Low-Voltage Ride-Through , 2014, IEEE Transactions on Industrial Electronics.

[48]  Keith Corzine,et al.  Performance characteristics of a cascaded two-level converter , 1999 .

[49]  Mohamed Benbouzid,et al.  Induction motor stator faults diagnosis by a current Concordia pattern-based fuzzy decision system , 2003 .

[50]  Didier Theilliol,et al.  A Failure-Detection Strategy for IGBT Based on Gate-Voltage Behavior Applied to a Motor Drive System , 2011, IEEE Transactions on Industrial Electronics.

[51]  Frede Blaabjerg,et al.  Transitioning to Physics-of-Failure as a Reliability Driver in Power Electronics , 2014, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[52]  Kyo-Beum Lee,et al.  Fault diagnosis of three-parallel voltage-source converter for a high-power wind turbine , 2012 .

[53]  Lee Empringham,et al.  Multiphase Power Converter Drive for Fault-Tolerant Machine Development in Aerospace Applications , 2010, IEEE Transactions on Industrial Electronics.

[54]  F. Huang,et al.  IGBT Fault Protection Based on di/dt Feedback Control , 2007, 2007 IEEE Power Electronics Specialists Conference.

[55]  Silverio Bolognani,et al.  Experimental fault-tolerant control of a PMSM drive , 1998, IECON '98. Proceedings of the 24th Annual Conference of the IEEE Industrial Electronics Society (Cat. No.98CH36200).

[56]  Frede Blaabjerg,et al.  Diagnosis and Tolerant Strategy of an Open-Switch Fault for T-Type Three-Level Inverter Systems , 2014, IEEE Transactions on Industry Applications.

[57]  Frede Blaabjerg,et al.  Open-Switch Fault Detection Method of a Back-to-Back Converter Using NPC Topology for Wind Turbine Systems , 2015, IEEE Transactions on Industry Applications.

[58]  Li Sun,et al.  Switching Function Model-Based Fast-Diagnostic Method of Open-Switch Faults in Inverters Without Sensors , 2011, IEEE Transactions on Power Electronics.

[59]  Ke Ma,et al.  The Impact of Power Switching Devices on the Thermal Performance of a 10 MW Wind Power NPC Converter , 2012 .

[60]  Leon M. Tolbert,et al.  A di/dt Feedback-Based Active Gate Driver for Smart Switching and Fast Overcurrent Protection of IGBT Modules , 2014, IEEE Transactions on Power Electronics.

[61]  Golta Khatibi,et al.  Accelerated mechanical fatigue testing and lifetime of interconnects in microelectronics , 2010 .

[62]  Cristian Busca.  Modeling lifetime of high power IGBTs in wind power applications - An overview , 2011, 2011 IEEE International Symposium on Industrial Electronics.

[63]  D. Diallo,et al.  Fault detection and diagnosis in an induction Machine drive: a pattern recognition approach based on concordia stator mean current vector , 2005, IEEE Transactions on Energy Conversion.

[64]  U. Drofenik,et al.  New physical model for lifetime estimation of power modules , 2010, The 2010 International Power Electronics Conference - ECCE ASIA -.

[65]  Frede Blaabjerg,et al.  Reliability Improvement of a T-Type Three-Level Inverter With Fault-Tolerant Control Strategy , 2015, IEEE Transactions on Power Electronics.

[66]  D. Theilliol,et al.  A New Fault Detection Technique for IGBT Based on Gate Voltage Monitoring , 2007, 2007 IEEE Power Electronics Specialists Conference.

[67]  Peter Tavner,et al.  Condition Monitoring for Device Reliability in Power Electronic Converters: A Review , 2010, IEEE Transactions on Power Electronics.

[68]  M. Naidu,et al.  Fault-Tolerant Permanent Magnet Motor Drive Topologies for Automotive X-By-Wire Systems , 2010 .

[69]  S. Haumann,et al.  Novel bonding and joining technology for power electronics - Enabler for improved lifetime, reliability, cost and power density , 2013, 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[70]  Dong-Seok Hyun,et al.  A Novel Fault Detection Scheme for Voltage Fed PWM Inverter , 2006, IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics.