A numerical and experimental approach to the design and failure analysis of a pinion shaft for wheel loaders

The present paper deals with the failure analysis and consequent design tips regarding a pinion shaft belonging to a differential gear for offroad machinery applications, namely wheel loaders. The motivations of the study arise from some in-field failures, which resulted in the fracture of the pinion shaft, originated at an external groove located at the end of its threaded portion. The issue has been tackled by means of analytical, numerical and experimental tools. The observed failures have been demonstrated to be due to the in-service loosening of a ring nut, whose function is to preload the tapered rolling bearings, which support the shaft. The weak points of the shaft design are highlighted and possible approaches to overcome the observed occurrence are presented at the end of the study.

[1]  H. O. Fuchs,et al.  Metal fatigue in engineering , 2001 .

[2]  M. Ketabchi,et al.  Fracture failure analysis of AISI 304L stainless steel shaft , 2014 .

[3]  Reno Filla,et al.  Optimizing the trajectory of a wheel loader working in short loading cycles , 2013 .

[4]  D. Rivas,et al.  Failure analysis of a diesel engine , 2017 .

[5]  Long Quan,et al.  Development of an asymmetric axial piston pump for displacement-controlled system , 2014 .

[6]  D. Croccolo,et al.  Analysis of the Influence of Fretting on the Fatigue Life of Interference Fitted Joints , 2014 .

[7]  Zhiyu Yang,et al.  A comprehensive overview of hybrid construction machinery , 2016 .

[8]  Robert C. Juvinall,et al.  Fundamentals of machine component design , 1983 .

[9]  Ofer Levi,et al.  Failures of bolts in helicopter main rotor drive plate assembly due to improper application of lubricant , 2003 .

[10]  Walter D. Pilkey.  Peterson's Stress Concentration Factors , 1997 .

[11]  Ian Sherrington,et al.  Towards an understanding of the loosening characteristics of prevailing torque nuts , 2010 .

[12]  John H. Bickford,et al.  Introduction to the Design and Behavior of Bolted Joints , 2007 .

[13]  Dario Croccolo,et al.  Influence of tightening procedures and lubrication conditions on titanium screw joints for lightweight applications , 2012 .

[14]  H. Bayrakceken,et al.  Failure analysis of an automobile differential pinion shaft , 2006 .

[15]  S. Fini,et al.  The influence of lubrication on the frictional characteristics of threaded joints for planetary gearboxes , 2016 .

[16]  Meng Guang,et al.  Investigation on the failure of the gear shaft connected to extruder , 2008 .

[17]  Sc Hsieh,et al.  The failure of threaded fasteners due to vibration , 2005 .

[18]  Reno Filla.  A Methodology for Modeling the Influence of Construction Machinery Operators on Productivity and Fuel Consumption , 2009, HCI.

[19]  Dario Croccolo,et al.  Failure analysis of bolted joints: Effect of friction coefficients in torque–preloading relationship , 2011 .

[20]  S. S. Pelaseyed,et al.  Investigation of the Shaft Failure Connected to Extruder , 2015, Journal of Failure Analysis and Prevention.

[21]  Giorgio Olmi,et al.  Tribological properties of bolts depending on different screw coatings and lubrications: An experimental study , 2017 .

[22]  G. Jayaraman,et al.  Root cause analysis of bowl-mill pinion shaft failures , 2013 .

[23]  G Dinger,et al.  Design of multi-bolted joints to prevent self-loosening failure , 2016 .

[24]  Soumitra Tarafder,et al.  Failure of a swing pinion shaft of a dragline , 2004 .

[25]  Xiaozhi Hu,et al.  Effects of heterogeneity and load amplitude on fatigue rate prediction of a welded joint , 2016 .