A critical survey on the application of plastic fracture mechanics to nuclear pressure vessels and piping

[1]  M. F. Kanninen,et al.  A Plastic Fracture Mechanics Prediction of Fracture Instability in a Circumferentially Cracked Pipe in Bending—Part II: Experimental Verification on a Type 304 Stainless Steel Pipe , 1981 .

[2]  M. F. Kanninen,et al.  A Plastic Fracture Mechanics Prediction of Fracture Instability in a Circumferentially Cracked Pipe in Bending—Part I: J-Integral Analysis , 1981 .

[3]  C. Shih,et al.  Relationships between the J-integral and the crack opening displacement for stationary and extending cracks , 1981 .

[4]  J. Achenbach,et al.  Crack-tip fields for fast fracture of an elastic-plastic material , 1981 .

[5]  R. J. Eiber,et al.  Evaluation of Tensile Failure of Girth Weld Repair Grooves in Pipe Subjected to Offshore Laying Stresses , 1981 .

[6]  John G. Merkle,et al.  Test of Thick Vessel with a Flaw in Residual Stress Field , 1981 .

[7]  E. Smith.  The difference between the fracture initiation and maximum load net-section stresses for a cracked structure , 1980 .

[8]  J. M. Bloom.  Corrections: “Prediction of Ductile Tearing Using A Proposed Strain Hardening Failure Assessment Diagram,” by J. M. Bloom , 1980 .

[9]  E. Smith,et al.  Theoretical justification for the association of a critical net-section stress with fracture initiation at a crack tip , 1980 .

[10]  J. M. Bloom.  Prediction of ductile tearing of compact fracture specimens using the R-6 failure assessment diagram , 1980 .

[11]  M. Kanninen.  Whither Dynamic Fracture Mechanics , 1980 .

[12]  J. M. Bloom,et al.  Prediction of ductile tearing using a proposed strain hardening failure assessment diagram , 1980 .

[13]  J. Rice,et al.  Comparison of experiment and theory for elastic-plastic plane strain crack growth , 1980 .

[14]  A. Emery,et al.  Dynamic Propagation of Circumferential Cracks in Two Pipes With Large-Scale Yielding , 1980 .

[15]  M. Wnuk.  Occurrence of catastrophic fracture in fully yielded components. Stability analysis , 1979 .

[16]  I. Milne,et al.  Failure analysis in the presence of ductile crack growth , 1979 .

[17]  A. Kfouri.  Crack separation energy-rates for the DBCS model under biaxial modes of loading , 1979 .

[18]  A. Kfouri.  Continuous crack growth or quantized growth steps? , 1979 .

[19]  K. Sadananda,et al.  Application of Fracture Mechanics Techniques to High Temperature Crack Growth , 1978 .

[20]  M. F. Kanninen,et al.  Towards an elastic-plastic fracture mechanics predictive capability for reactor piping , 1978 .

[21]  R. H. Bryan,et al.  Heavy-section steel technology program: Intermediate-scale pressure vessel tests☆ , 1978 .

[22]  T. K. Hellen,et al.  An integral associated with the state of a crack tip in a non-elastic material , 1977 .

[23]  John W. Hutchinson,et al.  Crack-tip fields in steady crack-growth with linear strain-hardening , 1977 .

[24]  John W. Hutchinson,et al.  Fully Plastic Solutions and Large Scale Yielding Estimates for Plane Stress Crack Problems , 1976 .

[25]  M. F. Kanninen,et al.  Mechanical fracture predictions for sensitized stainless steel piping with circumferential cracks. [BWR] , 1976 .

[26]  G. D. Whitman,et al.  Evaluation of the HSST program intermediate pressure vessel tests in terms of light-water-reactor pressure vessel safety , 1975 .

[27]  John W. Hutchinson,et al.  Fully plastic crack problems: The center-cracked strip under plane strain , 1975 .

[28]  John G. Merkle,et al.  A J Integral Analysis for the Compact Specimen, Considering Axial Force as Well as Bending Effects , 1974 .

[29]  James C. Newman,et al.  Fracture analysis of surface- and through-cracked sheets and plates☆ , 1973 .

[30]  D. Broek.  The role of inclusions in ductile fracture and fracture toughness , 1973 .

[31]  D. Broek,et al.  Artificial slow crack growth under constant stress. The r-curve concept in plane stress , 1973 .

[32]  W. S. Blackburn.  Path independent integrals to predict onset of crack instability in an elastic plastic material , 1972 .

[33]  D. Broek,et al.  Fail safe design procedures , 1972 .

[34]  David Broek,et al.  Concepts in Fail-Safe Design of Aircraft Structures, , 1971 .

[35]  J. Rice.  A path-independent integral and the approximate analysis of strain , 1968 .

[36]  D. Broek.  Some considerations on slow crack growth , 1968 .

[37]  A. Cottrell,et al.  The spread of plastic yield from a notch , 1963, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[38]  D. S. Dugdale.  Yielding of steel sheets containing slits , 1960 .

[39]  Frederick W. Brust,et al.  The Numerical Simulation of Crack Growth in Weld-Incuced Residual Stress Fields , 1982 .

[40]  John R. Rice,et al.  Elastic plastic analysis of growing cracks , 1980 .

[41]  James R. Rice,et al.  Tensile Cracks in Creeping Solids , 1980 .

[42]  S. Aoki,et al.  Dynamic stress intensity factors using Ĵ-integral and finite element method , 1980 .

[43]  P. C. Paris,et al.  A Stability Analysis of Circumferential Cracks for Reactor Piping Systems , 1980 .

[44]  L. Fu,et al.  Creep crack growth in technical alloys at elevated temperature—A review☆ , 1980 .

[45]  John W. Hutchinson,et al.  Stability Analysis of J -Controlled Crack Growth , 1979 .

[46]  C. Turner.  Description of Stable and Unstable Crack Growth in the Elastic Plastic Regime in Terms of Jr Resistance Curves , 1979 .

[47]  G. Chell,et al.  A Procedure for Incorporating Thermal and Residual Stresses into the Concept of a Failure Assessment Diagram , 1979 .

[48]  M. F. Kanninen,et al.  Elastic-plastic fracture mechanics for two-dimensional stable crack growth and instability problems , 1979 .

[49]  W. Reuter.  Estimating structural integrity of Type 304 stainless steel plates and pipes containing small defects , 1979 .

[50]  J. Begley,et al.  A Fracture Mechanics Approach to Creep Crack Growth , 1976 .

[51]  J. Rice,et al.  Elementary engineering fracture mechanics , 1974 .

[52]  John R. Rice,et al.  Some further results of J-integral analysis and estimates. , 1973 .

[53]  John W. Hutchinson,et al.  Singular behaviour at the end of a tensile crack in a hardening material , 1968 .

[54]  J. Rice,et al.  Plane strain deformation near a crack tip in a power-law hardening material , 1967 .