An experimental artificial-neural-network-based modeling of magneto-rheological fluid dampers

A static model for a magneto-rheological (MR) damper based on artificial neural networks (ANNs) is proposed, and an intensive and experimental study is presented for designing the ANN structure. The ANN model does not require time delays in the input vector. Besides the electric current signal, only one additional sensor is used to achieve a reliable MR damper structure. The model is experimentally validated with two commercial MR dampers of different characteristics: MR1 damper with continuous actuation and MR2 damper with two levels of actuation. The error to signal ratio (ESR) index is used to measure the model accuracy; for both MR dampers, an average value of 6.03% of total error is obtained from different experiments, which are designed to explore the nonlinearities of the MR phenomenon at different frequencies by including the impact of the electric current fluctuations. The proposed ANN model is compared with other well known parametric models; the qualitative and quantitative comparison among the models highlights the advantages of the ANN for representing a commercial MR damper. The ESR index was reduced by the ANN-based model by up to 29% with respect to the parametric models for the MR1 damper and up to 40% for the MR2 damper. The force–velocity diagram is used to compare the modeling properties of each approach: (1) the Bingham model cannot describe the hysteresis of both MR dampers and the distribution function of the modeled force varies from the experimental data, (2) the algebraic models have complications in representing the nonlinear behavior of the asymmetric damper (MR2) and, (3) the ANN-based MR damper can model the nonlinearities of both MR dampers and presents good scalability; the accuracy of the results supports the use of this model for the validation of semi-active suspension control systems for a vehicle, by using nonlinear simulations.

[1]  Shivaram Ac,et al.  Statistical modeling of a magneto-rheological fluid damper using the design of experiments approach , 2007 .

[2]  Byeonghwa Kim,et al.  Linearization of magnetorheological behaviour using a neural network , 1999, Proceedings of the 1999 American Control Conference (Cat. No. 99CH36251).

[3]  Şevki Çeşmeci,et al.  Comparison of some existing parametric models for magnetorheological fluid dampers , 2010 .

[4]  D. Gamota,et al.  Dynamic mechanical studies of electrorheological materials: Moderate frequencies , 1991 .

[5]  Kyoung Kwang Ahn,et al.  Hysteresis modeling of magneto-rheological (MR) fluid damper by self tuning fuzzy control , 2008, 2008 International Conference on Control, Automation and Systems.

[6]  Rubén Morales-Menéndez,et al.  Design of experiments for MR damper modelling , 2009, 2009 International Joint Conference on Neural Networks.

[7]  J. L. Sproston,et al.  Non-linear modelling of an electro-rheological vibration damper , 1987 .

[8]  Pinqi Xia,et al.  An inverse model of MR damper using optimal neural network and system identification , 2003 .

[9]  Bijan Samali,et al.  A novel hysteretic model for magnetorheological fluid dampers and parameter identification using particle swarm optimization , 2006 .

[10]  Billie F. Spencer,et al.  Large-scale MR fluid dampers: modeling and dynamic performance considerations , 2002 .

[11]  Ruben Morales-Menendez,et al.  Magnetorheological damper—an experimental study , 2012 .

[12]  Sergio M. Savaresi,et al.  Identification of semi-physical and black-box non-linear models: the case of MR-dampers for vehicles control , 2005, Autom..

[13]  Haiyan Hu,et al.  Nonlinear Stiffness of a Magneto-Rheological Damper , 2005 .

[14]  James Lam,et al.  Modelling of a magneto-rheological damper by evolving radial basis function networks , 2006, Eng. Appl. Artif. Intell..

[15]  Shaopu Yang,et al.  Dynamic Modeling of Magnetorheological Damper Behaviors , 2006 .

[16]  H. Metered,et al.  The experimental identification of magnetorheological dampers and evaluation of their controllers , 2010 .

[17]  Ruben Morales-Menendez,et al.  Comparison of MR damper models , 2010, 18th Mediterranean Conference on Control and Automation, MED'10.

[18]  Keum-Shik Hong,et al.  Modified Skyhook Control of Semi-Active Suspensions: A New Model, Gain Scheduling, and Hardware-in-the-Loop Tuning , 2002 .

[19]  Hamid Reza Karimi,et al.  Vibration control of a class of semiactive suspension system using neural network and backstepping techniques , 2009 .

[20]  James Lam,et al.  Semi-active H∞ control of vehicle suspension with magneto-rheological dampers , 2005 .

[21]  Şevki Çeşmeci,et al.  Modeling and Testing of a Field-Controllable Magnetorheological Fluid Damper , 2010 .

[22]  Seung-Ik Lee,et al.  A hysteresis model for the field-dependent damping force of a magnetorheological damper , 2001 .

[23]  Shirley J. Dyke,et al.  PHENOMENOLOGICAL MODEL FOR MAGNETORHEOLOGICAL DAMPERS , 1997 .

[24]  María Jesús López Boada,et al.  Modeling of a magnetorheological damper by recursive lazy learning , 2011 .

[25]  L. Wang,et al.  Modelling hysteretic behaviour in magnetorheological fluids and dampers using phase-transition theory , 2006 .

[26]  George Cybenko,et al.  Approximation by superpositions of a sigmoidal function , 1992, Math. Control. Signals Syst..

[27]  Chih-Chen Chang,et al.  NEURAL NETWORK EMULATION OF INVERSE DYNAMICS FOR A MAGNETORHEOLOGICAL DAMPER , 2002 .

[28]  Wei-Hsin Liao,et al.  Modeling and control of magnetorheological fluid dampers using neural networks , 2005 .

[29]  V. S. Atray,et al.  Design, fabrication, testing, and fuzzy modeling of a large magnetorheological damper for vibration control in a railcar , 2003 .