Is Graphene Always Effective in Reinforcing Composites? The Case of Highly Graphene-Modified Thermoplastic Nanofibers and Their Unfortunate Application in CFRP Laminates

Graphene (G) can effectively enhance polymers’ and polymer composites’ electric, thermal, and mechanical properties. Nanofibrous mats have been demonstrated to significantly increase the interlaminar fracture toughness of composite laminates, hindering delamination and, consequently, making such materials safer and more sustainable thanks to increased service life. In the present paper, poly(ethylene oxide) (PEO), polycaprolactone (PCL), and Nylon 66 nanofibers, plain or reinforced with G, were integrated into epoxy-matrix Carbon Fiber Reinforced Polymers (CFRPs) to evaluate the effect of polymers and polymers + G on the laminate mechanical properties. The main aim of this work is to compare the reinforcing action of the different nanofibers (polyether, polyester, and polyamide) and to disclose the effect of G addition. The polymers were chosen considering their thermal properties and, consequently, their mechanism of action against delamination. PEO and PCL, displaying a low melting temperature, melt, and mix during the curing cycle, act via matrix toughening; in this context, they are also used as tools to deploy G specifically in the interlaminar region when melting and mixing with epoxy resin. The high extent of modification stems from an attempt to deploy it in the interlaminar layer, thus diluting further in the resin. In contrast, Nylon 66 does not melt and maintain the nanostructure, allowing laminate toughening via nanofiber bridging. The flexural properties of the nanomodifed CFRPs were determined via a three-point bending (3PB) test, while delamination behavior in Mode I and Mode II was carried out using Double Cantilever Beam (DCB) and End-Notched Flexture (ENF) tests, respectively. The lack of a positive contribution of G in this context is an interesting point to raise in the field of nanoreinforced CFRP.

[1]  L. Giorgini,et al.  Rubber-enhanced polyamide nanofibers for a significant improvement of CFRP interlaminar fracture toughness , 2022, Scientific reports.

[2]  Qing-Yu Jiang,et al.  Recent advances in carbon-based electrocatalysts for vanadium redox flow battery: Mechanisms, properties, and perspectives , 2022, Composites Part B: Engineering.

[3]  S. Nabavi,et al.  Fabrication of hydrophilic special sandwich structure of PAN/GO/SiO2 electrospun membrane decorated with SiO2 nanoparticles for oil/water separation , 2022, Journal of Water Process Engineering.

[4]  Hang Zhou,et al.  Tailoring and properties of a novel solar energy-triggered regenerative bionic fiber adsorbent for CO2 capture , 2022, Chemical Engineering Journal.

[5]  L. Giorgini,et al.  New Application Field of Polyethylene Oxide: PEO Nanofibers as Epoxy Toughener for Effective CFRP Delamination Resistance Improvement , 2022, ACS omega.

[6]  S. Moyo,et al.  A Mini-Review of Nanocellulose-Based Nanofiber Membranes Incorporating Carbon Nanomaterials for Dye Wastewater Treatment , 2022, Environmental Nanotechnology, Monitoring & Management.

[7]  Ziqiang Shao,et al.  Construction of hierarchical porous derived from the cellulose nanofiber / graphene / Zn/Co ZIF 3D conductive carbon aerogels for high-performance supercapacitors , 2022, Journal of Alloys and Compounds.

[8]  L. Giorgini,et al.  Keratin/Polylactic acid/graphene oxide composite nanofibers for drug delivery. , 2022, International journal of pharmaceutics.

[9]  Lvtao Zhu,et al.  A Short Review of Recent Progress in Improving the Fracture Toughness of FRP Composites Using Short Fibers , 2022, Sustainability.

[10]  Weiwei Cui,et al.  Impregnation assisted graphene oxide/polyimide nanofiber composites with improved thermal conductivity and breakdown strength , 2022, Journal of Polymer Research.

[11]  Ping Li,et al.  Preparation of multi-axial compressible 3D PVDF nanofibre/graphene wearable composites sensor sponge and application of integrated sensor , 2022, Sensors and Actuators A: Physical.

[12]  Chenggao Li,et al.  Mechanical performance evolution and life prediction of prestressed CFRP plate exposed to hygrothermal and freeze-thaw environments , 2022, Composite Structures.

[13]  F. Zhou,et al.  A flexible strain sensor based on conductive TPU / CNTs‐Gr composites , 2022, Journal of Applied Polymer Science.

[14]  Yihe Zhang,et al.  Graphene/Polyimide Nanofibrous Mat for High-Efficiency Filtration , 2022, AATCC Journal of Research.

[15]  Haleh Bakhshandeh,et al.  Cold atmospheric plasma modification and electrical conductivity induction in gelatin/polyvinylidene fluoride nanofibers for neural tissue engineering. , 2022, Artificial organs.

[16]  Guoliang Yuan,et al.  Sensitivity enhanced, highly stretchable, and mechanically robust strain sensors based on reduced graphene oxide-aramid nanofibers hybrid fillers , 2022, Chemical Engineering Journal.

[17]  A. Maleki,et al.  Applications of carbon-based conductive nanomaterials in biosensors , 2022, Chemical Engineering Journal.

[18]  A. Pourjavadi,et al.  Electrospun Ag-decorated reduced GO-graft-chitosan composite nanofibers with visible light photocatalytic activity for antibacterial performance. , 2022, Chemosphere.

[19]  Zhenghong Huang,et al.  Self-supporting nitrogen-doped reduced graphene Oxide@Carbon nanofiber hybrid membranes as high-performance integrated air cathodes in Microbial fuel cells , 2022, Carbon.

[20]  Chenggao Li,et al.  Effect of the Addition of Thermoplastic Resin and Composite on Mechanical and Thermal Properties of Epoxy Resin , 2022, Polymers.

[21]  A. Pegoretti,et al.  Improving the Thermomechanical Properties of Poly(lactic acid) via Reduced Graphene Oxide and Bioderived Poly(decamethylene 2,5-furandicarboxylate) , 2022, Materials.

[22]  Huafeng Tian,et al.  Fabrication of PVA/GO Nanofiber Films by Electrospinning: Application for the Adsorption of Cu2+ and Organic Dyes , 2021, Journal of Polymers and the Environment.

[23]  L. Giorgini,et al.  Self-Assembled NBR/Nomex Nanofibers as Lightweight Rubbery Nonwovens for Hindering Delamination in Epoxy CFRPs , 2021, ACS applied materials & interfaces.

[24]  E. McCarthy,et al.  Experimental Study on the Interlaminar Fracture Properties of Carbon Fibre Reinforced Polymer Composites with a Single Embedded Toughened Film , 2021, Polymers.

[25]  A. Nikbakht,et al.  Applying Acoustic Emission Technique for Detecting Various Damages Occurred in PCL Nanomodified Composite Laminates , 2021, Polymers.

[26]  S. Ray,et al.  Morphological, Thermal, and Mechanical Properties of Electrospun Recycled Poly(ethylene terephthalate)/Graphene Oxide Composite Nanofiber Membranes , 2021, ACS omega.

[27]  Pooja S. Panicker,et al.  High-strength cellulose nanofiber/graphene oxide hybrid filament made by continuous processing and its humidity monitoring , 2021, Scientific Reports.

[28]  L. Giorgini,et al.  Damping and mechanical behaviour of composite laminates interleaved with rubbery nanofibers , 2021 .

[29]  J. Cabaj,et al.  Electrospun Nanofibers for Sensing and Biosensing Applications—A Review , 2021, International journal of molecular sciences.

[30]  L. Giorgini,et al.  Rubbery-Modified CFRPs with Improved Mode I Fracture Toughness: Effect of Nanofibrous Mat Grammage and Positioning on Tanδ Behaviour , 2021, Polymers.

[31]  Jonathan C. Moore,et al.  Functionalisable Epoxy-rich Electrospun Fibres Based on Renewable Terpene for Multi-Purpose Applications , 2021, Polymers.

[32]  A. E. Krauklis,et al.  Composite Material Recycling Technology—State-of-the-Art and Sustainable Development for the 2020s , 2021 .

[33]  A. E. Krauklis,et al.  Composite Material Recycling Technology – State-of-the-Art and Sustainable Development for the 2020s. , 2020 .

[34]  A. Alsalme,et al.  Role of Copper Oxide on Epoxy Coatings with New Intumescent Polymer-Based Fire Retardant , 2020, Molecules.

[35]  A. Fina,et al.  Properties of Graphene-Related Materials Controlling the Thermal Conductivity of Their Polymer Nanocomposites , 2020, Nanomaterials.

[36]  L. Giorgini,et al.  Rubbery nanofibrous interleaves enhance fracture toughness and damping of CFRP laminates , 2020, Materials & Design.

[37]  Lin Jiang,et al.  A Review on the Flammability Properties of Carbon-Based Polymeric Composites: State-of-the-Art and Future Trends , 2020, Polymers.

[38]  S. Joshi,et al.  A review of methods for improving interlaminar interfaces and fracture toughness of laminated composites , 2020, Materials Today Communications.

[39]  B. Martorana,et al.  Graphene and related materials in hierarchical fiber composites: Production techniques and key industrial benefits , 2020 .

[40]  L. Giorgini,et al.  Pd/Au Based Catalyst Immobilization in Polymeric Nanofibrous Membranes via Electrospinning for the Selective Oxidation of 5-Hydroxymethylfurfural , 2020, Processes.

[41]  A. Malara,et al.  Pd/Fe3O4 Nanofibers for the Catalytic Conversion of Lignin-Derived Benzyl Phenyl Ether under Transfer Hydrogenolysis Conditions , 2019, Catalysts.

[42]  L. Giorgini,et al.  Polyvinylamine Membranes Containing Graphene-Based Nanofillers for Carbon Capture Applications , 2019, Membranes.

[43]  Y. Mai,et al.  Synergetic improvement of interlaminar fracture energy in carbon fiber/epoxy composites with nylon nanofiber/polycaprolactone blend interleaves , 2019, Composites Part B: Engineering.

[44]  A. Zucchelli,et al.  Nanofibrous piezoelectric structures for composite materials to be used in electrical and electronic components , 2019, Proceedings of the Nordic Insulation Symposium.

[45]  L. Giorgini,et al.  Morphology, thermal, mechanical properties and ageing of nylon 6,6/graphene nanofibers as Nano2 materials , 2019, Composites Part B: Engineering.

[46]  Dagmar R. D’hooge,et al.  Interdiffusing core-shell nanofiber interleaved composites for excellent Mode I and Mode II delamination resistance , 2019, Composites Science and Technology.

[47]  Alain Dufresne,et al.  Nanofibers for Biomedical and Healthcare Applications. , 2018, Macromolecular bioscience.

[48]  M. Abedalwafa,et al.  Electrospun Nanofibers for Sensors , 2019, Electrospinning: Nanofabrication and Applications.

[49]  Alaa Mohamed,et al.  Preparation, characterization, and mechanical properties of polyacrylonitrile (PAN)/graphene oxide (GO) nanofibers , 2018, Mechanics of Advanced Materials and Structures.

[50]  L. Cristofolini,et al.  Biofabrication of Electrospun Scaffolds for the Regeneration of Tendons and Ligaments , 2018, Materials.

[51]  L. Giorgini,et al.  Poly- m -aramid electrospun nanofibrous mats as high-performance flame retardants for carbon fiber reinforced composites , 2018, Composites Part B: Engineering.

[52]  Vincenzo Palermo,et al.  Electrical percolation in graphene–polymer composites , 2018, 2D Materials.

[53]  F. Chiang,et al.  An experimental investigation of the temperature effect on the mechanics of carbon fiber reinforced polymer composites , 2018 .

[54]  A. Zucchelli,et al.  Electrospun nanofibers as reinforcement for composite laminates materials – a review , 2017 .

[55]  W. Van Paepegem,et al.  Damage-Resistant Composites Using Electrospun Nanofibers: A Multiscale Analysis of the Toughening Mechanisms. , 2016, ACS applied materials & interfaces.

[56]  A. Ogunlaja,et al.  Nanofiber-supported metal-based catalysts , 2016 .

[57]  Apurba Das,et al.  Flame retardant polymer composites , 2015, Fibers and Polymers.

[58]  Kikuo Okuyama,et al.  Morphology optimization of polymer nanofiber for applications in aerosol particle filtration , 2010 .

[59]  T. Gutowski,et al.  Life cycle energy analysis of fiber-reinforced composites , 2009 .

[60]  Reza Bagheri,et al.  Rubber-Toughened Epoxies: A Critical Review , 2009 .

[61]  I. Raju,et al.  Fracture mechanics concepts, stress fields, strain energy release rates, delamination initiation and growth criteria , 2008 .

[62]  David G Simpson,et al.  Nanofiber technology: designing the next generation of tissue engineering scaffolds. , 2007, Advanced drug delivery reviews.

[63]  Andre K. Geim,et al.  The rise of graphene. , 2007, Nature materials.

[64]  Leon Gradoń,et al.  Application of nanofibers to improve the filtration efficiency of the most penetrating aerosol particles in fibrous filters , 2006 .

[65]  Y. Inoue,et al.  Effect of aging on fractional crystallization of poly(ethylene oxide) component in poly(ethylene oxide)/poly(3-hydroxybutyrate) blends , 2005 .

[66]  Toshihiko Asami,et al.  Damping properties of thermoplastic-elastomer interleaved carbon fiber-reinforced epoxy composites , 2004 .

[67]  T. Nishi,et al.  Miscibility and crystallization in crystalline/crystalline blends of poly(butylene succinate)/poly(ethylene oxide) , 2003 .

[68]  U. Sorathia The Flammability of Composites , 1991 .

[69]  M. Inoue Studies on crystallization of high polymers by differential thermal analysis , 1963 .