Selective laser sintering/melting (SLS/SLM) of pure Al, Al-Mg, and Al-Si powders: Effect of processing conditions and powder properties

Abstract Selective laser sintering/melting (SLS/SLM) processing difficulties of aluminium powders had been attributed to issues associated with laser–materials interaction only while neglecting the role of powder properties. This study provides a wholistic understanding of factors that influence the development of SLS/SLM processing window, densification, and microstructure of pure Al, Al–Mg, and Al–Si powders, fabricated in single and multiple layer parts by exploring the roles of processing and material parameters. It was demonstrated that similarities existing in the SLS/SLM processing maps of the powders could be attributed to similarities in their packing densities with the alloying addition of magnesium and silicon having no predominant effect on their processing maps’ boundaries. Rather, alloying addition has significant effect on the nature of the evolved surface morphology of SLS/SLM processed aluminium powders in their processing windows. In addition, the flow and solidification behaviour of the melt pool of the powders during single layer scan was strongly influenced by the particle morphology and oxygen content of the powders as well as applied energy density. The energy density in the range of 12–16 J/mm2 was found to be the threshold below which SLS was predominant and above which SLM occurred for the investigated powders. Moreover, successful oxide disruption phenomena which is necessary for inter-particulate coalescence in multi-layered SLS/SLM processed aluminium powders are found to be mainly controlled by the amount of oxide in the as-received powder, the degree of the uniformity of the distribution of the surface oxide film covering the aluminium particles, the nature of thermal mismatch existing between the oxide film and the parent aluminium particle which was dependent on the phase present in the oxide film. Al–12 wt% Si powder is hereby affirmed as a suitable candidate material for SLS/SLM process due to its low thermal expansion and uniform distribution of its surface oxide films as well as the mullite phase in its oxide film.

[1]  Yifu Shen,et al.  Balling phenomena in direct laser sintering of stainless steel powder: Metallurgical mechanisms and control methods , 2009 .

[2]  Jan Bültmann,et al.  High Power Selective Laser Melting (HP SLM) of Aluminum Parts , 2011 .

[3]  I. Chang,et al.  Selective laser sintering of gas and water atomized high speed steel powders , 1999 .

[4]  Alan Dinsdale,et al.  The viscosity of aluminium and its alloys--A review of data and models , 2004 .

[5]  Spheroidisation and oxide disruption phenomena in direct selective laser melting (SLM) of pre-alloyed Al-Mg and Al-Si powders , 2009 .

[6]  Kenneth C. Mills,et al.  Marangoni effects in welding , 1998, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[7]  Abdolreza Simchi,et al.  The role of particle size on the laser sintering of iron powder , 2004 .

[8]  Direct selective laser sintering of aluminium alloy powders , 2008 .

[9]  Mushtaq Khan.  Selective laser melting (SLM) of gold (Au) , 2012 .

[10]  F. Klocke,et al.  Consolidation phenomena in laser and powder-bed based layered manufacturing , 2007 .

[11]  I. Chang,et al.  Instability of scan tracks of selective laser sintering of high speed steel powder , 1999 .

[12]  E. Brandl,et al.  Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior , 2012 .

[13]  Christopher J. Sutcliffe,et al.  Selective laser melting of aluminium components , 2011 .

[14]  T. Sercombe,et al.  The Effect of Particle Shape on the Sintering of Aluminum , 2007 .

[15]  G. H. Geiger,et al.  Transport Phenomena in Metallurgy , 1973 .

[16]  Kenneth W. Dalgarno,et al.  Densification mechanism and microstructural evolution in selective laser sintering of Al-12Si powders , 2011 .

[17]  L. Hao,et al.  Effect of Al alloys on selective laser melting behaviour and microstructure of in situ formed particle reinforced composites , 2012 .

[18]  Yifu Shen,et al.  Balling phenomena during direct laser sintering of multi-component Cu-based metal powder , 2007 .

[19]  L. Froyen,et al.  Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting , 2004 .

[20]  R. Raj,et al.  Shear strength and sliding at a metal–ceramic (aluminum–spinel) interface at ambient and elevated temperatures , 2007 .

[21]  Christian Coddet,et al.  Effects of processing parameters on properties of selective laser melting Mg–9%Al powder mixture , 2012 .

[22]  L. Hao,et al.  Experimental investigation on selective laser melting behaviour and processing windows of in situ reacted Al/Fe2O3 powder mixture , 2012 .

[23]  Abdolreza Simchi,et al.  Effects of laser sintering processing parameters on the microstructure and densification of iron powder , 2003 .

[24]  C. Harper.  Handbook of Ceramics Glasses, and Diamonds , 2001 .

[25]  Randall M. German,et al.  Particle packing characteristics , 1989 .