论文信息 - Air-Gap Control Using Optimal PID Controller for SIL-Based Near-Field Recording System

Air-Gap Control Using Optimal PID Controller for SIL-Based Near-Field Recording System

In SIL-based NFR servo systems, the residual error and the overshoot that are occurred in the process of the modes-witching servo which consists of approach, gap-control modes, and safety mode are reduced by using PID controller. However, the design method of conventional PID controller is not sufficient for the stable air gap control system. Therefore, the optimal PID controller using LQR manner is more useful to find the designed parameters of PID controller. In this paper, we show that the performance of the optimal PID controller is better than that of the lead-lag controller.

[1] Masanobu Yamamoto,et al. Gap Servo System for a Biaxial Device Using an Optical Gap Signal in a Near Field Readout System , 2003 .

[2] Takeharu Asano,et al. High Density Near-Field Optical Disc System , 2006 .

[3] Yun Li,et al. PID control system analysis, design, and technology , 2005, IEEE Transactions on Control Systems Technology.

[4] Masanobu Yamamoto,et al. Approach of Improving Disk Performance to High-Quality Gap Control in Near-Field Optical Disk Drive System , 2007 .

[5] Martin B. van der Mark,et al. Development of an Air Gap Servo System for High Data Transfer Rate Near Field Optical Recording , 2005 .

[6] Tae-Yong Kuc,et al. An adaptive PID learning control of DC motors , 1997, 1997 IEEE International Conference on Systems, Man, and Cybernetics. Computational Cybernetics and Simulation.