An optimal inventory policy for a multi-echelon closed-loop supply chain of postconsumer recycled content products
暂无分享,去创建一个
Zümbül Atan | Ali Shahandeh Nookabadi | Mostafa Parsa | Yaser Malekian | Z. Atan | Mostafa Parsa | A. Nookabadi | Y. Malekian
[1] Jong Soo Kim,et al. An adaptive joint replenishment policy for items with non-stationary demands , 2020, Oper. Res..
[2] M. Jaber,et al. Carbon emissions and energy effects on a two-level manufacturer-retailer closed-loop supply chain model with remanufacturing subject to different coordination mechanisms , 2017 .
[3] Bibhas C. Giri,et al. Optimizing a closed-loop supply chain with manufacturing defects and quality dependent return rate , 2015 .
[4] Hassan Basri,et al. A critical review on waste paper sorting techniques , 2014, International Journal of Environmental Science and Technology.
[5] Namhun Kim,et al. Optimal production delivery policies for supplier and manufacturer in a constrained closed-loop supply chain for returnable transport packaging through metaheuristic approach , 2019, Comput. Ind. Eng..
[6] T. C. Edwin Cheng,et al. Coordination of supply chains by option contracts: A cooperative game theory approach , 2010, Eur. J. Oper. Res..
[7] Mohamad Y. Jaber,et al. Carbon emissions and energy effects on manufacturing-remanufacturing inventory models , 2015, Comput. Ind. Eng..
[8] M. Jaber,et al. A consignment stock coordination scheme for the production, remanufacturing and waste disposal problem , 2014 .
[9] Hui-Ming Wee,et al. Sequential and global optimization for a closed-loop deteriorating inventory supply chain , 2010, Math. Comput. Model..
[10] Suresh Goyal,et al. A review of the joint replenishment problem literature: 1989-2005 , 2008, Eur. J. Oper. Res..
[11] Hui-Ming Wee,et al. Optimal ordering decisions with returns and excess inventory , 2011, Appl. Math. Comput..
[12] Luk N. Van Wassenhove,et al. Closed - Loop Supply Chain Models with Product Remanufacturing , 2004, Manag. Sci..
[13] Mohamad Y. Jaber,et al. A review of inventory lot sizing review papers , 2015 .
[14] Soumajyoti Sarkar,et al. A vendor–buyer integrated inventory system with variable lead time and uncertain market demand , 2020, Oper. Res..
[15] Mohamad Y. Jaber,et al. Four-level closed loop supply chain with remanufacturing , 2019, Applied Mathematical Modelling.
[16] Bopaya Bidanda,et al. Sustainable manufacturing production-inventory decision of multiple factories with JIT logistics, component recovery and emission control , 2019, Transportation Research Part E: Logistics and Transportation Review.
[17] Omprakash K. Gupta,et al. Branch and Bound Experiments in Convex Nonlinear Integer Programming , 1985 .
[18] A. Banerjee. A JOINT ECONOMIC-LOT-SIZE MODEL FOR PURCHASER AND VENDOR , 1986 .
[19] Jonas C. P. Yu,et al. Integrated manufacturer-retailer closed-loop inventory system with price-sensitive return and demand rates , 2019, Journal of Industrial and Production Engineering.
[20] Y. Gao,et al. Inventory decision-making models for a closed-loop supply chain system , 2010 .
[21] Yongjian Li,et al. Channel leadership, performance and coordination in closed loop supply chains , 2013 .
[22] S. Axsäter. Single-Echelon Systems: Deterministic Lot Sizing , 2015 .
[23] C. Glock. The joint economic lot size problem: A review , 2012 .
[24] Ioannis Konstantaras,et al. Lot sizing for a single product recovery system with variable setup numbers , 2010, Eur. J. Oper. Res..
[25] J. K. Jha,et al. A closed-form solution for the distribution free continuous review integrated inventory model , 2018, Oper. Res..
[26] Mokhtar S. Bazaraa,et al. Nonlinear Programming: Theory and Algorithms , 1993 .
[27] Jong Soo Kim,et al. Stochastic joint replenishment problem with quantity discounts and minimum order constraints , 2019, Oper. Res..
[28] Biyu Liu,et al. Inventory lot sizing policies for a closed-loop hybrid system over a finite product life cycle , 2020, Comput. Ind. Eng..
[29] Ioannis Konstantaras,et al. Lot-sizing for a single-product recovery system with backordering , 2006 .
[30] Nita H. Shah,et al. EPQ model for returned/reworked inventories during imperfect production process under price-sensitive stock-dependent demand , 2018, Oper. Res..
[31] James R. Stock,et al. Doctoral Research in Supply Chain Management and/or Logistics-Related Areas: 1999-2004 , 2006 .
[32] Paul H. Zipkin,et al. Foundations of Inventory Management , 2000 .
[33] Lotfi Tadj,et al. Exact and approximate solution for optimal inventory control of two-stock with reworking and forecasting of demand , 2019, Oper. Res..
[34] Ananth V. Iyer,et al. An Analysis of Recycled Content Claims Under Demand Benefit and Supply Uncertainty , 2016 .
[35] Yan-Cong Zhou,et al. Robust optimal inventory and acquisition effort decisions in a hybrid manufacturing/remanufacturing system , 2019, Journal of Industrial and Production Engineering.
[36] Lawrence V. Snyder,et al. EOQ Models with Supply Disruptions , 2014 .
[37] Zümbül Atan,et al. Inventory optimization for perishables subject to supply disruptions , 2016, Optim. Lett..
[38] R. W. J. McKinney,et al. Technology of paper recycling. , 1995 .
[39] S. Goyal. “A JOINT ECONOMIC‐LOT‐SIZE MODEL FOR PURCHASER AND VENDOR”: A COMMENT* , 1988 .
[40] Hui-Ming Wee,et al. Revisiting lot sizing for an inventory system with product recovery , 2010, Comput. Math. Appl..
[41] Ioannis Konstantaras,et al. A note on: Developing an exact solution for an inventory system with product recovery , 2008 .
[42] B. C. Giri,et al. A vendor–buyer JELS model with stock-dependent demand and consigned inventory under buyer’s space constraint , 2015, Oper. Res..
[43] Saman Hassanzadeh Amin,et al. A multi-objective facility location model for closed-loop supply chain network under uncertain demand and return , 2013 .
[44] Saman Hassanzadeh Amin,et al. An integrated model for closed-loop supply chain configuration and supplier selection: Multi-objective approach , 2012, Expert Syst. Appl..
[45] K. Richter,et al. A vendor-purchaser economic lot size problem with remanufacturing and deposit , 2011 .
[46] K. Richter. The extended EOQ repair and waste disposal model , 1996 .
[47] Hadi Mokhtari,et al. A single-supplier, multi-buyer, multi-product VMI production-inventory system under partial backordering , 2020, Oper. Res..
[48] Oshmita Dey,et al. A fuzzy random integrated inventory model with imperfect production under optimal vendor investment , 2019, Oper. Res..
[49] Ludo Gelders,et al. EOQ type formulations for controlling repairable inventories , 1992 .
[50] Mohamed Ben-Daya,et al. A single-vendor multi-buyer production remanufacturing inventory system under a centralized consignment arrangement , 2019, Comput. Ind. Eng..
[51] Mohammad Reza Akbari Jokar,et al. Optimizing shipment, ordering and pricing policies in a two-stage supply chain with price-sensitive demand , 2009 .
[52] Tom Scullion,et al. Validation of the Maximum Allowable Amounts of Recycled Binder, RAP, and RAS Using Accelerated Pavement Testing—Interim Report , 2014 .
[53] Suresh Kumar Goyal,et al. An integrated inventory model for a single supplier-single customer problem , 1977 .
[54] Bibhas Chandra Giri,et al. Lot sizing in a deteriorating production system under inspections, imperfect maintenance and reworks , 2014, Oper. Res..
[55] Erwin van der Laan,et al. Quantitative models for reverse logistics: A review , 1997 .
[56] Steven Nahmiasj,et al. A deterministic model for a repairable item inventory system with a finite repair rate , 1979 .
[57] M. Darwish,et al. The joint economic lot sizing problem: Review and extensions , 2008, Eur. J. Oper. Res..
[58] Mir Saman Pishvaee,et al. A possibilistic programming approach for closed-loop supply chain network design under uncertainty , 2010, Fuzzy Sets Syst..
[59] Hui-Ming Wee,et al. Optimal policy for a closed-loop supply chain inventory system with remanufacturing , 2008, Math. Comput. Model..
[60] Ananth V. Iyer,et al. An Analysis of Recycled Content Claims under Supply Uncertainty and Demand Benet , 2014 .
[61] M. Ben‐Daya,et al. An integrated inventory production system in a three-layer supply chain , 2008 .
[62] S. Goyal,et al. Integrated inventory models: The buyer-vendor coordination , 1989 .
[63] Mitsuo Gen,et al. Optimal strategies for the closed-loop supply chain with the consideration of supply disruption and subsidy policy , 2019, Comput. Ind. Eng..
[64] Lawrence V. Snyder,et al. Disruptions in One-Warehouse Multiple-Retailer Systems , 2012 .
[65] D. Schrady. A deterministic inventory model for reparable items , 1967 .
[66] Hark Hwang,et al. An optimal ordering and recovery policy for reusable items , 2002 .
[67] Mohammad Sadegh Moshtagh,et al. A consignment stock scheme for closed loop supply chain with imperfect manufacturing processes, lost sales, and quality dependent return: Multi Levels Structure , 2019, International Journal of Production Economics.
[68] Gerhard-Wilhelm Weber,et al. An evidential reasoning approach for production modeling with deteriorating and ameliorating items , 2020, Oper. Res..
[69] Lu Lu. A one-vendor multi-buyer integrated inventory model , 1995 .
[70] Fred Glover,et al. PITFALLS OF ROUNDING IN DISCRETE MANAGEMENT DECISION PROBLEMS , 1975 .
[71] Mark P. Sharfman,et al. The Introduction of Postconsumer Recycled Material into TYVEK® Production, Marketing, and Organizational Challenges , 2001 .
[72] K. Richter. The EOQ repair and waste disposal model with variable setup numbers , 1996 .
[73] K. Reddy,et al. Capacity investment and inventory planning for a hybrid manufacturing – remanufacturing system in the circular economy , 2020, Int. J. Prod. Res..
[74] J. K. Jha,et al. Optimal production-inventory policy for closed-loop supply chain with remanufacturing under random demand and return , 2020, Oper. Res..
[75] Subrata Mitra,et al. Analysis of a two-echelon inventory system with returns , 2009 .
[76] Subrata Mitra,et al. Inventory management in a two-echelon closed-loop supply chain with correlated demands and returns , 2012, Comput. Ind. Eng..
[77] Moncer Hariga,et al. Manufacturing-remanufacturing policies for a centralized two stage supply chain under consignment stock partnership , 2017 .
[78] Tarik Zouadi,et al. Hybrid manufacturing/remanufacturing lot-sizing and supplier selection with returns, under carbon emission constraint , 2018 .
[79] Wenxing Lu,et al. Closed-loop supply chain models with product remanufacturing under random demand , 2019 .
[80] Ruud H. Teunter,et al. Lot-sizing for inventory systems with product recovery , 2003, Comput. Ind. Eng..