Influence of the applied power on the barrier performance of silicon-containing plasma polymer coatings using a hollow cathode-activated PECVD process

A hollow cathode arc discharge is used for the roll-to-roll deposition of silicon-containing plasma polymer thin films on a polymer substrate. It is found that the fragmentation of the used monomer hexamethyldisiloxane (HMDSO) increases with increasing plasma power. The higher fragmentation was related to a reduced hydrogen content as a result of breaking CH bonds. This allowed for a higher degree of cross-linking. The latter has a positive effect on the barrier performance of the coatings. A hollow cathode arc discharge with separate anode allowed the deposition of a plasma polymer with a water vapor transmission rate (WVTR) of 0.16gm(-2)day(-1) (measured at 38 degrees C and 90% r.h.) on a PET substrate while maintaining a deposition rate of approximately 450nmmmin(-1).

[1]  J. Hosson,et al.  Hollow-cathode activated PECVD for the high-rate deposition of permeation barrier films , 2017 .

[2]  T. Wirtz,et al.  Experimental and simulation-based investigation of He, Ne and Ar irradiation of polymers for ion microscopy , 2016, Beilstein journal of nanotechnology.

[3]  R. Snyders,et al.  Correlation Between Mechanical Properties and Cross‐Linking Degree of Ethyl Lactate Plasma Polymer Films , 2015 .

[4]  N. Schiller,et al.  High Rate Low Pressure Plasma-Enhanced Chemical Vapor Deposition for Barrier and Optical Coatings , 2013 .

[5]  Peter Awakowicz,et al.  Silicon oxide barrier films deposited on PET foils in pulsed plasmas: influence of substrate bias on deposition process and film properties , 2013 .

[6]  D. Hegemann,et al.  Densification of functional plasma polymers by momentum transfer during film growth , 2012 .

[7]  C. Bittencourt,et al.  Physico-Chemical Characterization of Methyl Isobutyrate-based Plasma Polymer Films , 2011 .

[8]  Ching-Lin Fan,et al.  Low-temperature-processed (<100 °C) organic thin-film transistor using hollow-cathode CVD SiO2 as the gate insulator , 2010 .

[9]  Fred Fietzke,et al.  “Magnetically enhanced hollow cathode—a new plasma source for high‐rate deposition processes” , 2009 .

[10]  Yuefei Zhang,et al.  The power source effect on SiOx coating deposition by plasma enhanced chemical vapor deposition , 2009 .

[11]  M. Naddaf,et al.  Properties of thin films deposited from HMDSO/O2 induced remote plasma: Effect of oxygen fraction , 2008 .

[12]  Gabriella Andersson,et al.  GenX: an extensible X-ray reflectivity refinement program utilizing differential evolution , 2007 .

[13]  E. R. Fisher,et al.  Investigation of Gas Phase Species and Deposition of SiO2 Films from HMDSO/O2 Plasmas , 2006 .

[14]  Rudolf von Rohr,et al.  Deposition of SiOx diffusion barriers on flexible packaging materials by PECVD , 2005 .

[15]  Y. Gao,et al.  Plasma-deposited silicon oxide barrier films on polyethersulfone substrates: temperature and thickness effects , 2005 .

[16]  John Madocks,et al.  Packaging barrier films deposited on PET by PECVD using a new high density plasma source , 2005 .

[17]  R. Horng,et al.  Properties of SiO2-like barrier layers on polyethersulfone substrates by low-temperature plasma-enhanced chemical vapor deposition , 2004 .

[18]  J. Meichsner,et al.  Fourier transform infrared spectroscopy study of molecular structure formation in thin films during hexamethyldisiloxane decomposition in low pressure rf discharge , 2004 .

[19]  Vasile-Dan Hodoroaba,et al.  Glow discharge optical emission spectrometry: moving towards reliable thin film analysis–a short review , 2003 .

[20]  F. Palumbo,et al.  Deposition of SiOx Films from Hexamethyldisiloxane/Oxygen Radiofrequency Glow Discharges: Process Optimization by Plasma Diagnostics , 2002 .

[21]  F. Palumbo,et al.  RF plasma deposition of SiO2-like films: plasma phase diagnostics and gas barrier film properties optimisation , 2001 .

[22]  C. Hollenstein,et al.  Oxygen diluted hexamethyldisiloxane plasmas investigated by means of in situ infrared absorption spectroscopy and mass spectrometry , 2001 .

[23]  Bharat Bhushan,et al.  Fundamentals of tribology and bridging the gap between the macro- and micro/nanoscales , 2001 .

[24]  S. Rhee,et al.  Microstructure and interfacial states of silicon dioxide film grown by low temperature remote plasma enhanced chemical vapor deposition , 1999 .

[25]  Perry D. Haaland,et al.  SiOx Gas Barrier Coatings on Polymer Substrates: Morphology and Gas Transport Considerations , 1999 .

[26]  H. Morgner,et al.  The hollow cathode: a high-performance tool for plasma-activated deposition , 1998 .

[27]  Martin H. Schmidt,et al.  Absolute total and partial electron impact ionization cross sections of hexamethyldisiloxane , 1998 .

[28]  M. T. Kim.  Deposition behavior of hexamethydisiloxane films based on the FTIR analysis of Si–O–Si and Si–CH3 bonds , 1997 .

[29]  F. Jansen,et al.  Thin film deposition on inside surfaces by plasma enhanced chemical vapor deposition , 1994 .

[30]  M. Copeland.  Experience with esmolol for the treatment of cocaine-associated cardiovascular complications , 1991 .