Screen-printed thick-films: From materials to functional devices

Abstract The aim of the present paper is to demonstrate that the existence of a bulky sintered material, with the required properties for a potential application (called hereafter active material), does not necessarily mean a straightforward manufacturing of a corresponding functional planar thick-film device with the required properties. Many problems have to be solved at the level of each element of the micro-assembly, namely the substrate, the electrodes, the heating resistor, and of course the active material. Moreover, for a reliability approach, physico-chemical interactions in the whole micro-assembly have to be considered. Examples drawn from our own experience in the area, deal with super-thick copper pads, varistors, PZT-based pyroelectric sensors, semiconductor oxide gas sensors, zirconia oxygen sensors ….

[1]  Claude Lucat,et al.  The thick film route to selective gas sensors , 1995 .

[2]  F. Ménil,et al.  Nitrogen monoxide detection with a planar spinel coated amperometric sensor , 2001 .

[3]  Ingemar Lundström,et al.  Using a MISiCFET device as a cold start sensor , 2003 .

[4]  F. Ménil,et al.  Detection of phosphine at the ppm level by Sr1 — yCayFeO3 — x thick layers pretreated with highly concentrated phosphine in air. Evidence of a transition of the surface conductivity from p- to n-type , 1990 .

[5]  F. Ménil,et al.  A simplified model for evaluating the electrical resistance of a zirconia substrate with co-planar electrodes , 2001 .

[6]  Claude Lucat,et al.  Influence of the nature of the screen-printed electrode metal on the transport and detection properties of thick-film semiconductor gas sensors , 1991 .

[7]  F. Ménil,et al.  Thick-film densification for pyroelectric sensors , 1997 .

[8]  Role of the mineral binder in the sensing properties of screen-printed layers of semiconductor oxides Sr1−yCayFeO3−x (0 ⩽ y ⩽ 1; 0.19 ⩽ x ⩽ 0.50) , 1988 .

[9]  Hélène Debéda,et al.  Methane sensing : from sensitive thick films to a reliable selective device , 1997 .

[10]  N. Bui,et al.  Interpretation of the electrical properties of a SnO2 gas sensor after treatment with sulfur dioxide , 1984 .

[11]  M. Armand,et al.  Polymer electrolyte as internal ionic bridge for ion solid-state sensors , 1988 .

[12]  F. Ménil,et al.  Detection of phosphine with semiconductive Fe2O3 thick films: comparison with other binary oxides , 1989 .