Visualization of asphaltene deposition effects on porosity and permeability during CO2 flooding in porous media

In the present study, three types of experiments on immiscible CO2 flooding in porous media were conducted and high-resolution images of asphaltene precipitation obtained using X-ray micro-CT scanner. It was found that the effective oil mobility is reduced due to the adsorption of deposited asphaltene onto the rock which blocks the pore throats, whereby the formation wettability is changed and both the effective porosity and permeability are reduced. The deposited asphaltene cannot be redissolved or displaced by the reinjected crude oil, and the formation damage is irreversible. In addition, the porosity-based permeability model was applied to study the effective permeability reduction that results from porosity reduction. The porosity-based permeability was calculated based on the Kozeny–Carman equation and experimental data. The effective permeability variation rate obtained by the porosity-based permeability model agreed well with the results obtained by Darcy’s law, which demonstrates that the method is feasible in evaluating the effective permeability variation rate based on the porosity of the cores acquired from micro-CT images.Graphical abstract

[1]  Simón López-Ramírez,et al.  Asphaltene-Induced Precipitation and Deposition During Pressure Depletion on a Porous Medium: An Experimental Investigation and Modeling Approach , 2009 .

[2]  Johannes Bruining,et al.  The Modeling of Velocity Enhancement in Polymer Flooding , 1997 .

[3]  Sheldon B. Gorell,et al.  A Theory of the Optimal Policy of Oil Recovery by Secondary Displacement Processes , 1983 .

[4]  Tetsuya Suekane,et al.  Pore-scale visualization of gas trapping in porous media by X-ray CT scanning , 2010 .

[5]  Sally M. Benson,et al.  Characterization of CO2 storage properties using core analysis techniques and thin section data , 2009 .

[6]  Yongan Gu,et al.  Oil recovery mechanisms and asphaltene precipitation phenomenon in immiscible and miscible CO2 flooding processes , 2013 .

[7]  W. Anderson.  Wettability Literature Survey-Part 6: The Effects of Wettability on Waterflooding , 1987 .

[8]  Sushanta K. Mitra,et al.  Investigation of water and CO2 (carbon dioxide) flooding using micro-CT (micro-computed tomography) images of Berea sandstone core using finite element simulations , 2010 .

[9]  Martin J. Blunt,et al.  Pore Network Modeling: Analysis of Pore Size Distribution of Arabian Core Samples , 2007 .

[10]  L. Minssieux,et al.  Core damage from crude asphaltene deposition , 1997 .

[11]  Muhammad Sahimi,et al.  Pore network modelling of two-phase flow in porous rock: the effect of correlated heterogeneity , 2001 .

[12]  Tetsuya Suekane,et al.  Visualization of Micro-Scale Gas Bubbles Trapped in Sandstones , 2008 .

[13]  Shahin Kord,et al.  Asphaltene Deposition during CO2 Injection and Pressure Depletion: A Visual Study , 2012 .

[14]  Hind Taud,et al.  Porosity estimation method by X-ray computed tomography , 2005 .

[15]  W. B. Lindquist,et al.  Investigating 3D geometry of porous media from high resolution images , 1999 .

[16]  Milind Deo,et al.  Characterization of Carbon-Dioxide-Induced Asphaltene Precipitation , 2012 .

[17]  Okabe Hiroshi,et al.  Early Water Breakthrough—X-ray CT Visualizes How It Happens in Oil-Wet Cores , 2000 .

[18]  T. M. de Pedroza,et al.  Impact of Asphaltene Presence in Some Rock Properties , 1996 .

[19]  Arne Graue,et al.  In Situ Phase Pressures and Fluid Saturation Dynamics Measured in Waterfloods at Various Wettability Conditions , 2008 .

[20]  R. Al-Raoush,et al.  Extraction of physically realistic pore network properties from three-dimensional synchrotron X-ray microtomography images of unconsolidated porous media systems , 2005 .

[21]  E. Ritman.  Micro-computed tomography-current status and developments. , 2004, Annual review of biomedical engineering.