Design of Composite Laminates for Strength, Weight, and Manufacturability

A procedure is presented for determining the layups of unidirectional fiber reinforced composite plates (with or without cutouts) subjected to multiple in-plane and out-of-plane loadsets, such that the plate satisfies the Tsai-Wu Quadratic Strength Failure criterion, is of low weight, and has a layup which is easy to manufacture. Additionally, the desired cure cycle is generated for thermosetting matrix composite plates such that during cure the maximum allowed temperature is not exceeded, after cure the plate is fully cured and fully compacted, and the cure is achieved in the shortest time. The design of the layup for strength and weight (utilizing a finite element method for the stress analysis) is based on the Hybrid Algorithm for Laminate Optimization, modified to result in plates in which preassigned regions are of uniform thickness. The design of the layup for ease of manufacture is based on rules. The cure cycle is determined by simulating the cure process of the thermosetting matrix with a deterministic model "controlled" interactively by an expert system. A computer code SMARTOPT was developed which combines all the above features of the design process and, for specified geometry, material properties, and applied loadsets, provides the desired layup and cure cycle. Results for sample problems were generated which demonstrate the usefulness of the computer code for designing composite plates. The results also show that with proper design, plates made of composite materials can be made lighter than plates made of metals.

[1]  Antonio Miravete,et al.  Practical Analysis of COMPOSITE LAMINATES , 2018 .

[2]  George S. Springer,et al.  Design of Composite Laminates by a Monte Carlo Method , 1993 .

[3]  Raphael T. Haftka,et al.  Optimization of composite laminates , 1993 .

[4]  Jason Cherian Issac,et al.  Optimum Design of Composite Laminates against Delamination by Ranking , 1992 .

[5]  Raphael T. Haftka,et al.  Stacking sequence optimization of simply supported laminates with stability and strain constraints , 1992 .

[6]  C. Hong,et al.  A simple sublaminate approach to the design of thick composite laminates for suppression of free-edge delamination , 1992 .

[7]  S. Viswanath,et al.  Optimum Design of Composite Laminates for Strength by Ranking , 1991 .

[8]  Bo P. Wang,et al.  Optimum design of a composite structure with three types of manufacturing constraints , 1991 .

[9]  S. K. Morton,et al.  Heuristic methods in the design of composite laminated plates , 1991 .

[10]  Zelda B. Zabinsky,et al.  Designing laminated composites using random search techniques , 1991 .

[11]  George S. Springer,et al.  Smart Autoclave Cure of Composites , 2021 .

[12]  M. Miki,et al.  Optimum fiber angle of unidirectional composites for load with variations , 1990 .

[13]  Stevan Maksimović,et al.  Some computational and experimental aspects of optimal design process of composite structures , 1990 .

[14]  S. K. Morton,et al.  An expert system for laminated plate design using composite materials , 1990 .

[15]  G. Vanderplaats,et al.  Method for nonlinear optimization with discrete design variables , 1989 .

[16]  T. A. Weisshaar,et al.  Optimum design of composite structures , 1989 .

[17]  Tai-Yan Kam,et al.  Multilevel optimal design of laminated composite plate structures , 1989 .

[18]  Hisao Fukunaga,et al.  Simplified Design Techniques for Laminated Cylindrical Pressure Vessels under Stiffness and Strength Constraints , 1988 .

[19]  Hisao Fukunaga,et al.  On Laminate Configurations for Simultaneous Failure , 1988 .

[20]  J. P. H. Webber,et al.  Some laminated plate optimum design studies using an interactive computer programme , 1988, The Aeronautical Journal (1968).

[21]  W. J. Park,et al.  Symmetric Three-Directional Optimal Laminate Design , 1987 .

[22]  P. M. J. W. Martin,et al.  OPTIMUM DESIGN OF ANISOTROPIC SANDWICH PANELS WITH THIN FACES , 1987 .

[23]  A. J. Morris,et al.  A multicriteria objective function optimization scheme for laminated composites for use in multilevel structural optimization schemes , 1987 .

[24]  Li Weiji,et al.  Multilevel Optimization Procedure of Composite Structure , 1987 .

[25]  R. I. Watkins,et al.  Multilevel Optimization of Composite Structures , 1987 .

[26]  Anthony N. Palazotto,et al.  Composite laminate optimization program suitable for microcomputers , 1986 .

[27]  Jack R. Vinson,et al.  Recent advances in composites in the United States and Japan; Proceedings of the Symposium, Hampton, VA, June 6-8, 1983 , 1985 .

[28]  M. Miki,et al.  Design of Laminated Fibrous Composite Plates with Required Flexural Stiffness , 1985 .

[29]  S. Adali,et al.  Optimization of Fibre Reinforced Composite Laminates Subject to Fatigue Loading , 1985 .

[30]  Stevan Maksimović,et al.  Optimum Design of Composite Structures , 1985 .

[31]  S. Adibhatla,et al.  DESIGN OF LAMINATED PLATES FOR MAXIMUM BENDING STRENGTH , 1985 .

[32]  Thierry N. Massard,et al.  Computer Sizing of Composite Laminates for Strength , 1984 .

[33]  G. Springer,et al.  Curing of Epoxy Matrix Composites , 1983 .

[34]  George S. Springer,et al.  Heat of Reaction, Degree of Cure, and Viscosity of Hercules 3501-6 Resin , 1982 .

[35]  W. J. Park,et al.  An Optimal Design of Simple Symmetric Laminates Under the First Ply Failure Criterion , 1982 .

[36]  V. Vasil’ev,et al.  Optimum Design and Strength of Layered Thin Composites , 1979 .

[37]  Raphael T. Haftka,et al.  Preliminary design of composite wings for buckling, strength and displacement constraints , 1978 .

[38]  J. J. McKeown.  Optimal composite structures by deflection-variable programming , 1977 .

[39]  Charles W. Bert,et al.  Optimal Design of Composite-Material Panels for Business Aircraft , 1977 .

[40]  Lucien A. Schmit,et al.  Optimum design of laminated fibre composite plates , 1977 .

[41]  C. C. Chao,et al.  Optimization of Buckling and Yield Strengths of Laminated Composites , 1975 .

[42]  Vipperla B. Venkayya,et al.  Optimization of fiber reinforced composite structures , 1973 .

[43]  Lucien A. Schmit,et al.  Optimum laminate design for strength and stiffness , 1973 .

[44]  Thomas P. Kicher,et al.  Minimum Weight Design of Stiffened Fiber Composite Cylinders , 1971 .