Structure and performance of nano-hydroxyapatite filled biodegradable poly((1,2-propanediol-sebacate)-citrate) elastomers

Abstract Novel nano-hydroxyapatite (n-HAp)/poly((1,2-propanediol-sebacate)-citrate) (PPSC) composites, with varying the amount of n-HAp (5–20 wt%), for potential use in the soft tissue engineering were developed in the present work. The structure of composites was characterized by FT-IR and 13 C NMR, the micromorphology of n-HAp and the dispersion property of n-HAp in n-HAp/PPSC composites were characterized by SEM and TEM. The experimental results showed that no obvious chemical bonds generated between n-HAp and PPSC matrix. Homogeneous distribution of nanoparticles in the polymer matrix was validated. DSC and DMA indicated that the Tg of the composites decreased with increasing the n-HAp content, as the chemical cross-linking density of the composites decreased. The mechanical properties of the composites were prominently improved, when the amount of n-HAp increased up to 20 wt%, the modulus of the composites increased 11.4 times, and the tensile strength of the composites increased 8.2 times. The hydrophilicity, water absorption, and degradation rate of composites can be tuned through varying the concentration of n-HAp. In vitro cytotoxicity was evaluated by the MTT assay with the L929 cell. The cell relative growth rates of the composites with the amount of n-HAp more than 10 wt% exceeded 75% after 7 days of incubation.

[1]  J. Fung,et al.  Characterization and application of poly(β-hydroxyalkanoates) family as composite biomaterials , 2000 .

[2]  G. Impallomeni,et al.  Evidence for selective hydrolysis of aliphatic copolyesters induced by lipase catalysis. , 2004, Biomacromolecules.

[3]  W. Bonfield,et al.  In vitro and in vivo evaluation of polyhydroxybutyrate and of polyhydroxybutyrate reinforced with hydroxyapatite. , 1991, Biomaterials.

[4]  A. Boccaccini,et al.  Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering. , 2006, Biomaterials.

[5]  赵华,et al.  Skin fillers , 2010 .

[6]  V. Firouzdor,et al.  NEEDLE-LIKE NANO HYDROXYAPATITE/POLY(L-LACTIDE ACID) COMPOSITE SCAFFOLD FOR BONE TISSUE ENGINEERING APPLICATION , 2009 .

[7]  Masahiro Yoshimura,et al.  Processing and properties of hydroxyapatite-based biomaterials for use as hard tissue replacement implants , 1998 .

[8]  A. Albertsson,et al.  Quantitative determination of degradation products an effective means to study early stages of degradation in linear and branched poly(butylene adipate) and poly(butylene succinate) , 2004 .

[9]  A. Hiltner,et al.  Conductivity of polyolefins filled with high‐structure carbon black , 2005 .

[10]  M. Nguyen,et al.  Flocculation of carbon black in filled rubber compounds. I. Flocculation occurring in unvulcanized compounds during annealing at elevated temperatures , 1995 .

[11]  Eugene Khor,et al.  Hydroxyapatite-chitin materials as potential tissue engineered bone substitutes. , 2004, Biomaterials.

[12]  Jerome A Werkmeister,et al.  Collagen-hydroxyapatite composite prepared by biomimetic process. , 2004, Journal of biomedical materials research. Part A.

[13]  J. Russias,et al.  Microspheres as building blocks for hydroxyapatite/polylactide biodegradable composites , 2006 .

[14]  Jia-cong Shen,et al.  Preparation and characterization of biodegradable chitosan/hydroxyapatite nanocomposite rods via in situ hybridization: a potential material as internal fixation of bone fracture. , 2004, Biomaterials.

[15]  Aldo R Boccaccini,et al.  Polyhydroxyalkanoate (PHA)/inorganic phase composites for tissue engineering applications. , 2006, Biomacromolecules.

[16]  D. Choi,et al.  Chemical synthesis of hydroxyapatite/poly(ε-caprolactone) composites , 2004 .

[17]  J. Tanaka,et al.  The chitosan prepared from crab tendons: II. The chitosan/apatite composites and their application to nerve regeneration. , 2003, Biomaterials.

[18]  W. Douglas,et al.  Preparation of hydroxyapatite-gelatin nanocomposite. , 2003, Biomaterials.

[19]  Liqun Zhang,et al.  Synthesis, characterization and in vitro degradation of a novel degradable poly ( (1 ,2 -propanediol -sebacate ) -citrate) bioelastomer , 2007 .

[20]  R. Ritchie,et al.  Fabrication and mechanical properties of PLA/HA composites: A study of in vitro degradation. , 2006, Materials science & engineering. C, Biomimetic and supramolecular systems.

[21]  P. Ma,et al.  Poly(alpha-hydroxyl acids)/hydroxyapatite porous composites for bone-tissue engineering. I. Preparation and morphology. , 1999, Journal of biomedical materials research.

[22]  J. Russias,et al.  Fabrication and in vitro characterization of three-dimensional organic/inorganic scaffolds by robocasting. , 2007, Journal of biomedical materials research. Part A.

[23]  R. Langer,et al.  A tough biodegradable elastomer , 2002, Nature Biotechnology.

[24]  Biqiong Chen,et al.  Mechanical and dynamic viscoelastic properties of hydroxyapatite reinforced poly(ε-caprolactone) , 2005 .

[25]  Xiaotong Zheng,et al.  Hydrogen bonding interaction of poly(D,L-lactide)/hydroxyapatite nanocomposites , 2007 .

[26]  J. Ni,et al.  In vitro evaluation of hydroxyapatite reinforced polyhydroxybutyrate composite , 2002 .