Glass nanostructures fabricated by soft thermal nanoimprint

A one-step, fast, and potential low cost process has been developed to fabricate silicalike glass nanostructures by combining sol-gel chemistry and thermal nanoimprint. An inorganic-organic sol-gel thin film is patterned at low pressure and temperature with flexible stamps. Various geometries are achieved with a patterning resolution of about 150nm and pattern aspect ratio higher than 4. To obtain pure silica structures a thermal annealing at high temperatures is required. During this step most of the structures collapse due to fluidization of the sol-gel material. It is shown that if a suitable condensation level is obtained during imprinting, the nanostructures are thermally stable.A one-step, fast, and potential low cost process has been developed to fabricate silicalike glass nanostructures by combining sol-gel chemistry and thermal nanoimprint. An inorganic-organic sol-gel thin film is patterned at low pressure and temperature with flexible stamps. Various geometries are achieved with a patterning resolution of about 150nm and pattern aspect ratio higher than 4. To obtain pure silica structures a thermal annealing at high temperatures is required. During this step most of the structures collapse due to fluidization of the sol-gel material. It is shown that if a suitable condensation level is obtained during imprinting, the nanostructures are thermally stable.

[1]  A. Durán,et al.  Thermal Evolution of Hybrid Sol-Gel Silica Coatings: A Structural Analysis , 2000 .

[2]  C. Tanford.  Macromolecules , 1994, Nature.

[3]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[4]  Heinz Schmid,et al.  Siloxane Polymers for High-Resolution, High-Accuracy Soft Lithography , 2000 .

[5]  Compact dye laser on a chip fabricated by ultraviolet nanoimprint lithography , 2006 .

[6]  J. Werner,et al.  Sol-gel coatings for light trapping in crystalline thin film silicon solar cells , 1997 .

[7]  Hiroshi Hiroshima,et al.  Evaluation of Line Edge Roughness in Nanoimprint Lithography Using Photocurable Polymer , 2003 .

[8]  Kazuhito Tsukagoshi,et al.  Direct nanoimprint of inorganic-organic hybrid glass , 2006 .

[9]  Wei Wu,et al.  Fabrication of 5 nm linewidth and 14 nm pitch features by nanoimprint lithography , 2004 .

[10]  Jian Wang,et al.  Large area direct nanoimprinting of SiO2–TiO2 gel gratings for optical applications , 2003 .

[11]  Stephen R. Forrest,et al.  Improved light out-coupling in organic light emitting diodes employing ordered microlens arrays , 2002 .

[12]  U. Gösele,et al.  Mesoscopic ferroelectric cell arrays prepared by imprint lithography , 2003 .

[13]  W. Kim,et al.  Fabrication of ridge waveguides by UV embossing and stamping of sol-gel hybrid materials , 2004 .

[14]  F. Brunet.  Polymerization reactions in methyltriethoxysilane studied through 29Si NMR with polarization transfer , 1998 .

[15]  Wei-Hua Huang,et al.  Tri-layer soft UV imprint lithography and fabrication of high density pillars , 2006 .

[16]  Sol-Gel Glass from Organic Modified Silicates for Optics Applications , 2003 .

[17]  Andrew G. Glen,et al.  APPL , 2001 .

[18]  Hanben Niu,et al.  Soft-lithography-enabled fabrication of large numerical aperture refractive microlens array in hybrid SiO2–TiO2 sol-gel glass , 2005 .

[19]  P. Colinvaux,et al.  A Long Pollen Record from Lowland Amazonia: Forest and Cooling in Glacial Times , 1996, Science.