Orientation mapping of nanostructured materials using transmission Kikuchi diffraction in the scanning electron microscope.

In this study, the new technique of transmission Kikuchi diffraction (TKD) in the scanning electron microscope (SEM) has been applied for the first time to enable orientation mapping of bulk, nanostructured metals. The results show how the improved spatial resolution of SEM-TKD, compared to conventional EBSD, enables reliable mapping of truly nanostructured metals and alloys, with mean grain sizes in the 40-200 nm range. The spatial resolution of the technique is significantly below 10nm, and contrasting examples are shown from both dense (Ni) and lighter (Al-alloy) materials. Despite the burden of preparing thin, electron-transparent samples, orientation mapping using SEM-TKD is likely to become invaluable for routine characterisation of nanocrystalline and, potentially, highly deformed microstructures.

[1]  R. Valiev,et al.  Enhanced grain refinement of an Al–Mg–Si alloy by high-pressure torsion processing at 100 °C , 2012 .

[2]  J. Bowen,et al.  The effect of coarse second-phase particles on the rate of grain refinement during severe deformation processing , 2003 .

[3]  F. J. Humphreys,et al.  High resolution electron backscatter diffraction with a field emission gun scanning electron microscope. , 1999, Journal of microscopy.

[4]  E. Arzt.  Size effects in materials due to microstructural and dimensional constraints: a comparative review , 1998 .

[5]  H. H. Liu,et al.  Three-Dimensional Orientation Mapping in the Transmission Electron Microscope , 2011, Science.

[6]  Melina Da Silva,et al.  Individual grain orientations and texture development of nanocrystalline electrodeposits showing abnormal grain growth , 2007 .

[7]  H. Roven,et al.  Optimization of EBSD parameters for ultra‐fast characterization , 2012, Journal of microscopy.

[8]  S. Zaefferer,et al.  Towards ultrahigh resolution EBSD by low accelerating voltage , 2010 .

[9]  Jui-Chao Kuo,et al.  Effect of microscopic parameters on EBSD spatial resolution. , 2011, Ultramicroscopy.

[10]  F. J. Humphreys,et al.  Characterisation of fine-scale microstructures by electron backscatter diffraction (EBSD) , 2004 .

[11]  P. Prangnell,et al.  The effect of strain path on the development of deformation structures in severely deformed aluminium alloys processed by ECAE , 2000 .

[12]  R. Valiev,et al.  Bulk nanostructured materials from severe plastic deformation , 2000 .

[13]  T. Langdon,et al.  Principle of equal-channel angular pressing for the processing of ultra-fine grained materials , 1996 .

[14]  Roy H. Geiss,et al.  Transmission EBSD from 10 nm domains in a scanning electron microscope , 2012 .

[15]  Daniel Haley,et al.  Crystallographic structural analysis in atom probe microscopy via 3D Hough transformation. , 2011, Ultramicroscopy.

[16]  A. Hernando.  Magnetic properties and spin disorder in nanocrystalline materials , 1999 .

[17]  S. Zaefferer.  Orientation microscopy in SEM and TEM: A critical review , 2011 .

[18]  U. Klement,et al.  On the orientations of abnormally grown grains in nanocrystalline Ni and Ni–Fe , 2008, Journal of microscopy.

[19]  R. Valiev,et al.  Principles of equal-channel angular pressing as a processing tool for grain refinement , 2006 .

[20]  T. Langdon,et al.  Orientation imaging microscopy of ultrafine-grained nickel , 2002 .

[21]  M. Murashkin,et al.  Structure and properties of ultra-fine grained aluminium alloys produced by severe plastic deformation , 1997 .

[22]  D. Dingley,et al.  Progressive steps in the development of electron backscatter diffraction and orientation imaging microscopy , 2004, Journal of microscopy.

[23]  H. Gleiter,et al.  Nanocrystalline materials: a way to solids with tunable electronic structures and properties? , 2001 .

[24]  R. Valiev,et al.  Paradox of Strength and Ductility in Metals Processed Bysevere Plastic Deformation , 2002 .