Economic Analysis Approach for Identifying Optimal Microirrigation Uniformity

AbstractNonuniform pressure of microirrigation systems negatively impacts crop productivity, water utilization, and nonpoint source pollution. However, achieving network pressure uniformity can be prohibitively expensive. This paper presents an economic optimization method that seeks to balance competing costs and benefits. A custom computer software script is developed to implement the method and an irrigation case study is presented. Regression analysis showed that the relationship between economic efficiency and Christiansen uniformity (CU) is a cubic function with an optimum uniformity (i.e., in reference to CU) at 0.78 for cotton and 0.86 for olive trees. The results also indicate that water cost is the most important factor influencing total cost and economic efficiency, and next is capital cost. Also, irrigation systems with a relatively small subunit size (0.1–0.42 ha for cotton and 0.72–2.16 ha for olive) commonly lead to a high economic efficiency. Finally, to guarantee adequate uniformity, the ...

[1]  Elias Fereres,et al.  Yield Responses of a Mature Olive Orchard to Water Deficits , 2003 .

[2]  Jiusheng Li,et al.  Effects of drip system uniformity and irrigation amount on cotton yield and quality under arid conditions , 2013 .

[3]  I-Pai Wu,et al.  Design of Drip Irrigation Submain , 1977 .

[4]  I. Seginer Irrigation uniformity related to horizontal extent of root zone , 2004, Irrigation Science.

[5]  J. M. Tarjuelo,et al.  Design of microirrigation subunit of minimum cost with proper operation , 2013, Irrigation Science.

[6]  Raúl Sánchez,et al.  Water distribution in laterals and units of subsurface drip irrigation. I: Simulation. , 2009 .

[7]  A. Dinar,et al.  An economic analysis of irrigation systems , 2004, Irrigation Science.

[8]  Leonor Rodríguez-Sinobas,et al.  Determining minor head losses in drip irrigation laterals. II: Experimental study and validation , 2002 .

[9]  Gary P. Merkley,et al.  Drip irrigation lateral design procedure based on emission uniformity and field microtopography , 2010 .

[10]  Ken Solomon,et al.  Manufacturing Variation of Trickle Emitters , 1979 .

[11]  Giuseppe Provenzano,et al.  Experimental Analysis of Local Pressure Losses for Microirrigation Laterals , 2004 .

[12]  T. Howell,et al.  Water use efficiency of narrow row cotton , 1984, Irrigation Science.

[13]  James E. Ayars,et al.  Deep Seepage Under Nonuniform Sprinkler Irrigation: I. Theory , 1990 .

[14]  J. Letey,et al.  Irrigation uniformity as related to optimum crop production — additional research is needed , 1985, Irrigation Science.

[15]  Li Jiusheng,et al.  Field evaluation of drip fertigation uniformity effects on distributions of water and nitrogen in soil. , 2010 .

[16]  J. P. Bordovsky,et al.  Effect of Subsurface Drip Irrigation System Uniformity on Cotton Production in the Texas High Plains , 2008 .

[17]  Jiusheng Li,et al.  Effects of drip system uniformity on yield and quality of Chinese cabbage heads , 2012 .

[18]  Earl O. Heady,et al.  Water Production Functions for Irrigated Agriculture , 1980 .

[19]  Kenneth H. Solomon,et al.  Global Uniformity of Trickle Irrigation Systems , 1985 .

[20]  M. Bethune,et al.  Understanding and predicting deep percolation under surface irrigation , 2008 .

[21]  Graeme C. Dandy,et al.  Optimum Design and Operation of Multiple Subunit Drip Irrigation Systems , 1996 .

[22]  Jiusheng Li,et al.  Crop Yield as Affected by Uniformity of Sprinkler Irrigation System , 1998 .

[23]  E. C. Mantovani,et al.  Modelling the effects of sprinkler irrigation uniformity on crop yield , 1995 .

[24]  Benjamin Zur,et al.  Emitter Discharge Sensitivity to Pressure and Temperature , 1981 .

[25]  J. Li,et al.  Effects of drip irrigation system uniformity and nitrogen applied on deep percolation and nitrate leaching during growing seasons of spring maize in semi-humid region , 2014, Irrigation Science.

[26]  Eli Feinerman,et al.  Optimum Crop Water Application as Affected by Uniformity of Water Infiltration1 , 1984 .

[27]  I. P. Wu,et al.  DESIGN CRITERIA FOR MICROIRRIGATION SYSTEMS , 2000 .

[28]  Raúl Sánchez,et al.  Analytical Relationships for Designing Rectangular Drip Irrigation Units , 2004 .

[29]  Vincent F. Bralts,et al.  Drip Irrigation Uniformity Considering Emitter Plugging , 1980 .

[30]  Curtis Wilde,et al.  Economic Analysis of Subsurface Drip Irrigation System Uniformity , 2009 .

[31]  Vincent F. Bralts,et al.  Manufacturing Variation and Drip Irrigation Uniformity , 1981 .

[32]  Vincent F. Bralts,et al.  Drip Irrigation Field Uniformity Estimation , 1983 .

[33]  X. Pang,et al.  Irrigation Quantity and Uniformity and Nitrogen Application Effects on Crop Yield and Nitrogen Leaching , 1997 .

[34]  David Karmeli,et al.  Trickle irrigation design parameters. , 1974 .

[35]  Pute Wu,et al.  Design of drip irrigation lateral for optimum capital and operating cost , 2010 .