A correlation between Schmidt hammer rebound numbers with impact strength index, slake durability index and P-wave velocity

[1]  C. D. Pomeroy,et al.  The Strength, Fracture and Workability of Coal: A Monograph on Basic Work on Coal Winning Carried Out by the Mining Research Establishment, National Coal Board , 2013 .

[2]  T. Singh,et al.  A correlation between P-wave velocity, impact strength index, slake durability index and uniaxial compressive strength , 2008 .

[3]  T. Singh,et al.  Slake durability study of shaly rock and its predictions , 2005 .

[4]  S. Kahraman,et al.  A correlation between P -wave velocity, number of joints and Schmidt hammer rebound number , 2001 .

[5]  E. Kolaiti,et al.  Evaluation of schmidt rebound hammer testing: A critical approach , 1993 .

[6]  D. McCarrol.  Schmidt hammer, weathering and rock surface roughness. Short communication : Earth Surf Process LandV16, N5, Aug 1991, P477–480 , 1992 .

[7]  D. McCarroll.  The schmidt hammer, weathering and rock surface roughness , 1991 .

[8]  R. Sjöberg,et al.  Measurement and calibration of weathering using the schmidt hammer, on wave washed moraines on the upper norrland coast, Sweden , 1991 .

[9]  A. Shakoor,et al.  Evaluation of empirical methods for measuring the uniaxial compressive strength of rock , 1990 .

[10]  J. O'rourke.  Rock index properties for geoengineering in underground development , 1989 .

[11]  A. K. Ghose,et al.  Empirical Strength Indices Of Indian Coals - An Investigation , 1986 .

[12]  Bhawani Singh,et al.  Schmidt hammer rebound data for estimation of large scale in situ coal strength , 1984 .

[13]  F. P. Hassani,et al.  The Application Of Strength And Deformation Index Testing To The Stability Assessment Of Coal Measures Excavations , 1983 .

[14]  A. Kidybiński,et al.  Bursting liability indices of coal , 1981 .

[15]  I. W. Farmer,et al.  Consistency and repeatability of Schmidt Hammer rebound data during field testing , 1980 .

[16]  Hussain Rabia,et al.  An Empirical Equation For Drill Performance Prediction , 1980 .

[17]  Isrm.  Suggested methods for determining hardness and abrasiveness of rocks , 1978 .

[18]  R E Aufmuth,et al.  A SYSTEMATIC DETERMINATION OF ENGINEERING CRITERIA FOR ROCK , 1974 .

[19]  J. Franklin,et al.  The slake-durability test , 1972 .

[20]  Schmidt hammer test method for field determination of physical properties of zeolitized tuff , 1970 .

[21]  W. E. Bruce,et al.  Drillability studies: laboratory percussive drilling , 1969 .

[22]  D. Deere,et al.  Engineering classification and index properties for intact rock , 1966 .

[23]  E. F. Osborn.  Role of oxygen pressure in the crystallization and differentiation of basaltic magma , 1959 .

[24]  E. Schmidt,et al.  A non-destructive concrete tester , 1951 .