Dynamic Analysis of 4-SPS/CU Parallel Mechanism Considering Three-Dimensional Wear of Spherical Joint With Clearance

[1]  Jin Ye,et al.  Kinetic uncertainty analysis of the reheat-stop-valve mechanism with multiple factors , 2010 .

[2]  T. Piątkowski.  GMS friction model approximation , 2014 .

[3]  Rui Zhang,et al.  A systematic optimization approach for the calibration of parallel kinematics machine tools by a laser tracker , 2014 .

[4]  J. Archard.  Contact and Rubbing of Flat Surfaces , 1953 .

[5]  L. J. Yang.  A test methodology for the determination of wear coefficient , 2005 .

[6]  Jorge Ambrósio,et al.  Influence of the contact—impact force model on the dynamic response of multi-body systems , 2006 .

[7]  T. Piątkowski.  Analysis of translational positioning of unit loads by directionally-oriented friction force fields , 2011 .

[8]  Vincenzo Parenti-Castelli,et al.  Clearance influence analysis on mechanisms , 2005 .

[9]  Shuming Gao,et al.  Detachment avoidance of joint elements of a robotic manipulator with clearances based on trajectory planning , 2010 .

[10]  Margarida F. Machado,et al.  On the continuous contact force models for soft materials in multibody dynamics , 2011 .

[11]  B. Shirinzadeh,et al.  Design and dynamics of a 3-DOF flexure-based parallel mechanism for micro/nano manipulation , 2010 .

[12]  Jian Zhong Zhang,et al.  FEM Based Numerical Simulation of Delta Parallel Mechanism , 2013 .

[13]  Qitao Huang,et al.  PD control with gravity compensation for hydraulic 6-DOF parallel manipulator☆ , 2010 .

[14]  Hamid M. Lankarani,et al.  Compliant contact force models in multibody dynamics : evolution of the Hertz contact theory , 2012 .

[15]  Singiresu S Rao,et al.  Interval Approach for the Modeling of Tolerances and Clearances in Mechanism Analysis , 2004 .

[16]  W. Sawyer,et al.  Analysis of planar multibody systems with revolute joint wear , 2010 .

[17]  Sheng Li,et al.  An Investigation of the Impacts of Contact Parameters on Wear Coefficient , 2014 .

[18]  Madara Ogot,et al.  Dimensional Tolerance Allocation of Stochastic Dynamic Mechanical Systems Through Performance and Sensitivity Analysis , 1993 .

[19]  Priit Põdra,et al.  Wear simulation with the Winkler surface model , 1997 .

[20]  Paulo Flores,et al.  Study of the friction-induced vibration and contact mechanics of artificial hip joints , 2014 .

[21]  T. Shiau,et al.  Nonlinear dynamic analysis of a parallel mechanism with consideration of joint effects , 2008 .

[22]  H. Lankarani,et al.  Spatial rigid-multibody systems with lubricated spherical clearance joints: modeling and simulation , 2010 .

[23]  H. Lankarani,et al.  A comparative study of the viscoelastic constitutive models for frictionless contact interfaces in solids , 2015 .

[24]  A Leardini,et al.  Articular surface approximation in equivalent spatial parallel mechanism models of the human knee joint: An experiment-based assessment , 2010, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[25]  Jorge Ambrósio,et al.  Dynamics of Multibody Systems With Spherical Clearance Joints , 2005 .

[26]  M. Bergamasco,et al.  A new screw theory method for the estimation of position accuracy in spatial parallel manipulators with revolute joint clearances , 2011 .

[27]  Hongzhao Liu,et al.  A new method for the determination of the zero velocity region of the Karnopp model based on the statistics theory , 2009 .

[28]  S. Caro,et al.  Sensitivity analysis of parallel manipulators using an interval linearization method , 2014 .

[29]  M. Silva,et al.  A parametric study on the Baumgarte stabilization method for forward dynamics of constrained multibody systems , 2009 .

[30]  Xianmin Zhang,et al.  Dynamic analysis of a 3-RRR parallel mechanism with multiple clearance joints , 2014 .

[31]  M. H. Aliabadi,et al.  Wear simulation using an incremental sliding Boundary Element Method , 2006 .

[32]  Med Amine Laribi,et al.  Clearance and manufacturing errors' effects on the accuracy of the 3-RCC Spherical Parallel Manipulator , 2013 .

[33]  Paulo Flores,et al.  Modeling and simulation of wear in revolute clearance joints in multibody systems , 2009 .

[34]  Z. Bai,et al.  A hybrid contact force model of revolute joint with clearance for planar mechanical systems , 2013 .

[35]  J. Ambrósio,et al.  A mathematical framework for rigid contact detection between quadric and superquadric surfaces , 2010 .

[36]  Jun Chen,et al.  Dynamics analysis of planar mechanical system considering revolute clearance joint wear , 2013 .

[37]  Damien Chablat,et al.  Stiffness modeling for perfect and non-perfect parallel manipulators under internal and external loadings , 2014 .

[38]  Yunqing Zhang,et al.  Dynamics of spatial flexible multibody systems with clearance and lubricated spherical joints , 2009 .

[39]  Jorge Ambrósio,et al.  Impact of Rigid and Flexible Multibody Systems: Deformation Description and Contact Models , 2003 .

[40]  Xu Li-Xin,et al.  Investigation of joint clearance effects on the dynamic performance of a planar 2-DOF pick-and-place parallel manipulator , 2014 .

[41]  Gengxiang Wang,et al.  Dynamics Analysis of Spatial Multibody System With Spherical Joint Wear , 2015 .

[42]  Paulo Flores,et al.  Dynamic modeling and analysis of wear in spatial hard-on-hard couple hip replacements using multibody systems methodologies , 2015 .

[43]  Tony L. Schmitz,et al.  Comparison Between Elastic Foundation and Contact Force Models in Wear Analysis of Planar Multibody System , 2010 .

[44]  Meng-Shiun Tsai,et al.  Inverse dynamics analysis for a 3-PRS parallel mechanism based on a special decomposition of the reaction forces , 2010 .

[45]  Amir Rezaei,et al.  An interval-valued fuzzy controller for complex dynamical systems with application to a 3-PSP parallel robot , 2014, Fuzzy Sets Syst..

[46]  João B. Costa,et al.  Influence of the hip joint modeling approaches on the kinematics of human gait , 2015 .

[47]  I. Páczelt,et al.  The experimental and numerical analysis of quasi-steady wear processes for a sliding spherical indenter , 2012 .

[48]  Zouhaier Affi,et al.  Prediction of the pose errors produced by joints clearance for a 3-UPU parallel robot , 2009 .

[49]  Linfang Qian,et al.  Dynamic analysis of mechanical systems with planar revolute joints with clearance , 2015 .

[50]  Jorge Ambrósio,et al.  On the contact detection for contact-impact analysis in multibody systems , 2010 .