In-Plane Biocompatible Microfluidic Interconnects for Implantable Microsystems

Small mammals, particularly mice, are very useful animal models for biomedical research. Extremely small anatomical dimensions, however, make design of implantable microsystems quite challenging. A method for coupling external fluidic systems to microfluidic channels via in-plane interconnects is presented. Capillary tubing is inserted into channels etched in the surface of a Si wafer with a seal created by Parylene-C deposition. Prediction of Parylene-C deposition into tapered channels based on Knudsen diffusion and deposition characterizations allows for design optimization. Low-volume interconnects using biocompatible, chemical resistant materials have been demonstrated and shown to withstand pressure as high as 827 kPa (120 psi) with an average pull test strength of 2.9 N. Each interconnect consumes less than 0.018 mm3 (18 nL) of volume. The low added volume makes this an ideal interconnect technology for medical applications where implant volume is critical.

[1]  S.D. Collins,et al.  Fluidic interconnects for modular assembly of chemical microsystems , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[2]  P. Renaud,et al.  Flexible polyimide probes with microelectrodes and embedded microfluidic channels for simultaneous drug delivery and multi-channel monitoring of bioelectric activity. , 2004, Biosensors & bioelectronics.

[3]  M. Junk,et al.  A Study of Parylene C Polymer Deposition Inside Microscale Gaps , 2007, IEEE Transactions on Advanced Packaging.

[4]  M. Kim,et al.  Thickness uniformity of gas-phase coatings in narrow channels: II. One-side confined channels , 2002 .

[5]  D. Broer,et al.  Penetration of p‐xylylene vapor into small channels prior to polymerization , 1981 .

[6]  J. Fawcett,et al.  Polyimide micro-channel arrays for peripheral nerve regenerative implants , 2008 .

[7]  E. M. Tolstopyatov,et al.  Thickness distribution of gas phase coatings in confined channels , 2004 .

[8]  Li Jiang,et al.  A Generic Chip-to-World Fluidic Interconnect System for Microfluidic Devices , 2007, 2007 Thirty-Ninth Southeastern Symposium on System Theory.

[9]  K. R. Williams,et al.  Novel interconnection technologies for integrated microfluidic systems , 1998 .

[10]  Micro-Molded Cannulae for Intracochlear Infusions in Small Rodents , 2007, 2007 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[11]  J. J. Licari,et al.  Coating materials for electronic applications : polymers, processes, reliability, testing , 2003 .

[12]  F. Durst,et al.  Pressure-driven diffusive gas flows in micro-channels: from the Knudsen to the continuum regimes , 2009 .

[13]  Aniruddha Puntambekar,et al.  Self-aligning microfluidic interconnects for glass- and plastic-based microfluidic systems , 2002 .

[14]  M. Sefton,et al.  Implantable pumps. , 1987, Critical reviews in biomedical engineering.

[15]  Shaochen Chen,et al.  Polydimethylsioxane fluidic interconnects for microfluidic systems , 2003 .

[16]  A. Christensen,et al.  Characterization of interconnects used in PDMS microfluidic systems , 2005 .

[17]  A. Baldi,et al.  A reworkable adhesive-free interconnection technology for microfluidic systems , 2006, Journal of Microelectromechanical Systems.

[18]  S. Buckman,et al.  Absolute elastic electron scattering from benzene , 1999 .

[19]  Hong-Seok Noha,et al.  Parylene micromolding, a rapid and low-cost fabrication method for parylene microchannel , 2004 .