Embedded electrical tracks in 3D printed objects by fused filament fabrication of highly conductive composites

Abstract The incorporation of electrical components into 3D printed products such as sensors or printing of circuits requires the use of 3D printable conductive materials. However, most conductive materials available for fused filament fabrication (FFF) have conductivities of less than 1000 S/m. Here, we describe the study of conductive thermoplastic composites comprising either nylon – 6 or polyethylene (PE) matrix. The fillers used were nickel and Sn95Ag4Cu1, a low melting point metal alloy. The combination of nickel metal particles and tin alloy allows for higher metal loading at lower melt viscosity, compared to composites of nickel metal particles alone. Conductivities of 31,000 S/m were achieved, and 30 vol. % metal loading was processable by a single screw extruder. Embedded conductive tracks of various geometries were easily printed via FFF. Electrical conductivity of embedded conductive track has been investigated as a function of geometrical variation, where conductive tracks printed along a horizontal axis show resistance of ≤ 1 Ω. Porosity of the printed track is shown to increase with prints along the vertical axis, leading to a reduction in electrical conductivity of more than two orders of magnitude.

[1]  Richard E. Martin,et al.  Anisotropy of thermal conductivity in 3D printed polymer matrix composites for space based cube satellites , 2017 .

[2]  J. Cesarano,et al.  ROBOCASTING PROVIDES MOLDLESS FABRICATION FROM SLURRY DEPOSITION , 1998 .

[3]  D. Therriault,et al.  3D Printing of Highly Conductive Nanocomposites for the Functional Optimization of Liquid Sensors. , 2016, Small.

[4]  Wei Jiang,et al.  3D Printable Graphene Composite , 2015, Scientific Reports.

[5]  L. Murr,et al.  Microstructural and Process Characterization of Conductive Traces Printed from Ag Particulate Inks , 2011, Materials.

[6]  Woo Y. Lee,et al.  Graphene supercapacitor electrodes fabricated by inkjet printing and thermal reduction of graphene oxide , 2011 .

[7]  U. Schubert,et al.  Inkjet Printing of Narrow Conductive Tracks on Untreated Polymeric Substrates , 2008 .

[8]  U. Sundararaj,et al.  Three-dimensional printing of highly conductive polymer nanocomposites for EMI shielding applications , 2017 .

[9]  W. Cong,et al.  Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling , 2015 .

[10]  S. Magdassi,et al.  Flexible electroluminescent device with inkjet-printed carbon nanotube electrodes , 2012, Nanotechnology.

[11]  L Delle Site,et al.  Polymers near metal surfaces: selective adsorption and global conformations. , 2002, Physical review letters.

[12]  Sungho Jin,et al.  Developing lead-free solders: A challenge and opportunity , 1993 .

[13]  U. Schubert,et al.  Ink‐jet Printing and Microwave Sintering of Conductive Silver Tracks , 2006 .

[14]  C. Kao,et al.  Selective interfacial reaction between Ni and eutectic BiSn lead-free solder , 2001 .

[15]  Yang Yang,et al.  3D printing of shape memory polymer for functional part fabrication , 2016 .

[16]  Feng Fu,et al.  Resistivity and Its Anisotropy Characterization of 3D-Printed Acrylonitrile Butadiene Styrene Copolymer (ABS)/Carbon Black (CB) Composites , 2017 .

[17]  R. A. Matula.  Electrical resistivity of copper, gold, palladium, and silver , 1979 .

[18]  Y. Mai,et al.  Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites , 2008 .

[19]  Ryan B. Wicker,et al.  Microstructural characterization of electrically failed conductive traces printed from Ag nanoparticle inks , 2012 .

[20]  Xudong Chen,et al.  Fully 3D Printed 2.4 GHz Bluetooth/Wi-Fi Antenna , 2013 .

[21]  C. P. Purssell,et al.  Using a magnetite/thermoplastic composite in 3D printing of direct replacements for commercially available flow sensors , 2014 .

[22]  F. Senatov,et al.  Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds. , 2016, Journal of the mechanical behavior of biomedical materials.

[23]  Vivek Subramanian,et al.  Plastic-Compatible Low Resistance Printable Gold Nanoparticle Conductors for Flexible Electronics , 2003 .

[24]  Chao Xu,et al.  Solvent-cast based metal 3D printing and secondary metallic infiltration , 2017 .

[25]  Siew Ting Melissa Tan,et al.  Electrically conductive filament for 3D-printed circuits and sensors , 2017 .

[26]  Wei Wang,et al.  Low temperature sintering nano-silver conductive ink printed on cotton fabric as printed electronics , 2016 .

[27]  R. Vaidyanathan,et al.  Single wall nanotube and vapor grown carbon fiber reinforced polymers processed by extrusion freeform fabrication , 2003 .

[28]  R. Wicker,et al.  3-D Printed Microwave Patch Antenna via Fused Deposition Method and Ultrasonic Wire Mesh Embedding Technique , 2015, IEEE Antennas and Wireless Propagation Letters.

[29]  Yongsheng Chen,et al.  Graphene-based conducting inks for direct inkjet printing of flexible conductive patterns and their applications in electric circuits and chemical sensors , 2011 .

[30]  Brett Paull,et al.  A 3D printable diamond polymer composite: a novel material for fabrication of low cost thermally conducting devices , 2016 .

[31]  Yi Cui,et al.  Stretchable, porous, and conductive energy textiles. , 2010, Nano letters.

[32]  K. Hayakawa,et al.  Sintering of Ultrafine Metal Powders. II. Neck Growth Stage of Au, Ag, Al and Cu , 1981 .

[33]  James M. Burkstrand,et al.  Metal‐polymer interfaces: Adhesion and x‐ray photoemission studies , 1981 .

[34]  Philip Nash,et al.  The Ni−Sn (Nickel-Tin) system , 1985 .

[35]  S Sánchez,et al.  Applications of three-dimensional (3D) printing for microswimmers and bio-hybrid robotics. , 2015, Lab on a chip.

[36]  C. Verbeek.  Effect of Percolation on the Mechanical Properties of Sand-filled Polyethylene Composites , 2007 .

[37]  E. Sachlos,et al.  Making tissue engineering scaffolds work. Review: the application of solid freeform fabrication technology to the production of tissue engineering scaffolds. , 2003, European cells & materials.

[38]  M. Ashby,et al.  Designing hybrid materials , 2003 .

[39]  J. Hearle,et al.  Physical Properties of Textile Fibres , 1962 .

[40]  L. F. Bieg,et al.  Highly Conductive, Melt Processable Polymer Composites Based on Nickel and Low Melting Eutectic Metal , 2010 .

[41]  J. Cesarano,et al.  Direct Ink Writing of Three‐Dimensional Ceramic Structures , 2006 .

[42]  A. Evans,et al.  On the toughness of particulate filled polymers , 1985 .

[43]  I Zein,et al.  Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling. , 2001, Journal of biomedical materials research.

[44]  Chang-Soo Han,et al.  The production of transparent carbon nanotube field emitters using inkjet printing , 2009 .

[45]  S. Magdassi,et al.  Conductive nanomaterials for printed electronics. , 2014, Small.

[46]  David A. Hutchins,et al.  A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors , 2012, PloS one.

[47]  Ismail Durgun,et al.  Experimental investigation of FDM process for improvement of mechanical properties and production cost , 2014 .