Organic tandem solar cells—modelling and predictions

Tandem combinations of organic photovoltaic devices are studied from an optical point of view. We unify coherent (wave-based) as well as incoherent (irradiance-based) light addition in our treatment of the incoming and reflected electromagnetic waves, and calculate the spatially resolved absorption profile in the cells. The model allows for any number and any order of thin and thick layers to be analysed. Irradiation is monochromatic or polychromatic, AM 1.5 or AM 1.0, and therefore applicable for solar cell simulation. The optical modelling is unified with electrical models of charge generation and transport in the solar cells. Through this, de-coupling of optical and electrical processes is possible. Moreover, the model allows identification of limiting processes in the devices. The model is applied to a tandem cell with copolymers of polyfluorene combined in bulk heterojunctions with fullerene acceptors, one device for high energy absorption and one for lower, where anodes and cathodes for the cells are semi-transparent metallic polymer layers. It is concluded that these materials do not at present have an electrical performance, which can be enhanced by the tandem cell combination.

[1]  Dieter Meissner,et al.  Photocurrent spectroscopy for the investigation of charge carrier generation and transport mechanisms in organic p/n-junction solar cells , 2000 .

[2]  Stephen R. Forrest,et al.  High photovoltage multiple-heterojunction organic solar cells incorporating interfacial metallic nanoclusters , 2002 .

[3]  Yang Yang,et al.  High Performance Polymer Light-Emitting Diodes Fabricated by a Low Temperature Lamination Process** , 2001 .

[4]  Wolfgang Brütting,et al.  Exciton diffusion and optical interference in organic donor–acceptor photovoltaic cells , 2001 .

[5]  Martin A. Green.  Third Generation Photovoltaics: Advanced Solar Energy Conversion , 2004 .

[6]  Mats Andersson,et al.  Low bandgap alternating polyfluorene copolymers in plastic photodiodes and solar cells , 2004 .

[7]  Michael Dürr,et al.  Tandem dye-sensitized solar cell for improved power conversion efficiencies , 2004 .

[8]  O. Inganäs,et al.  Optical modelling of a layered photovoltaic device with a polyfluorene derivative/fullerene as the active layer , 2004 .

[9]  J. Rogers,et al.  Organic light-emitting devices with laminated top contacts , 2004 .

[10]  Martin Pfeiffer,et al.  Organic p-i-n solar cells , 2004 .

[11]  R. Friend,et al.  Dye-based donor/acceptor solar cells , 2000 .

[12]  Christoph J. Brabec,et al.  Sensitization of low bandgap polymer bulk heterojunction solar cells , 2002 .

[13]  Ulrich S. Schubert,et al.  Ink‐Jet Printing of Electron Donor/Acceptor Blends: Towards Bulk Heterojunction Solar Cells , 2005 .

[14]  S. Kim,et al.  High‐Efficiency Soft‐Contact‐Laminated Polymer Light‐Emitting Devices with Patterned Electrodes , 2004 .

[15]  L. S. Roman,et al.  Modeling photocurrent action spectra of photovoltaic devices based on organic thin films , 1999 .

[16]  Optical modelling of a single-junction p-i-n type and tandem structure amorphous silicon solar cells with perfect current matching , 1997 .

[17]  H.-G. Rubahn,et al.  UV laser-induced grating formation in PDMS thin films , 2004 .

[18]  N. Arnold,et al.  Modeling of optical absorption in conjugated polymer/fullerene bulk-heterojunction plastic solar cells , 2004 .

[19]  Mats Andersson,et al.  Trapping light in polymer photodiodes with soft embossed gratings , 2000 .

[20]  Stephen R. Forrest,et al.  Asymmetric tandem organic photovoltaic cells with hybrid planar-mixed molecular heterojunctions , 2004 .

[21]  T. Gaylord,et al.  Analysis and applications of optical diffraction by gratings , 1985, Proceedings of the IEEE.

[22]  Stephen R. Forrest,et al.  Small molecular weight organic thin-film photodetectors and solar cells , 2003 .

[23]  O. Inganäs,et al.  Modeling electrical transport in blend heterojunction organic solar cells , 2005 .

[24]  Jai Singh,et al.  Optical modelling of tandem structure amorphous silicon solar cells , 1998 .

[25]  H. R. Wilson,et al.  Simulation of multiply scattering media , 1998 .

[26]  Masahiro Hiramoto,et al.  Effect of Thin Gold Interstitial-layer on the Photovoltaic Properties of Tandem Organic Solar Cell , 1990 .

[27]  C. Winder,et al.  Low bandgap polymers for photon harvesting in bulk heterojunction solar cells , 2004 .

[28]  Martin Pfeiffer,et al.  High efficiency organic solar cells based on single or multiple PIN structures , 2004 .

[29]  O. Inganäs,et al.  Design, Synthesis and Properties of Low Band Gap Polyfluorenes for Photovoltaic Devices , 2005 .

[30]  Christoph J. Brabec,et al.  Organic photovoltaics : concepts and realization , 2003 .

[31]  Sam-Shajing Sun,et al.  Organic Photovoltaics : Mechanisms, Materials, and Devices , 2005 .

[32]  O. Inganäs,et al.  Optical optimization of polyfluorene-fullerene blend photodiodes , 2005 .

[33]  Frederik C. Krebs,et al.  Production of large-area polymer solar cells by industrial silk screen printing, lifetime considerations and lamination with polyethyleneterephthalate , 2004 .

[34]  John A Rogers,et al.  Organic light-emitting diodes formed by soft contact lamination. , 2004, Proceedings of the National Academy of Sciences of the United States of America.

[35]  Mats Andersson,et al.  Laminated fabrication of polymeric photovoltaic diodes , 1998, Nature.