Numerical and experimental validation of an explicit meshfree method: With applications to material forming

Abstract Meshfree methods were introduced twenty-five years ago to overcome a range of issues faced by mesh-based methods, which predominately relate to the issues of mesh-entanglement, which can result in poor accuracy. Although meshfree methods have progressed significantly over these years, the application of these techniques to real-world material forming problems is limited, despite the potential benefits they can provide over traditional mesh-based methods. This paper is concerned with the meshfree simulation of the stretch blow moulding process, which is the primary manufacturing process used to produce polymer bottles. Traditionally, the finite element method has been used to simulate this process, however, difficulties are often encountered during these simulations, which can cause reduced accuracy. In this paper, a nodally integration explicit element-free Galerkin method is formulated. Firstly, the formulation is validated through several numerical problems, which display the accuracy, and computational efficiency of the proposed method. Following this, the experimental characterisation of the stretch blow moulding process is discussed. Finally, the developed formulation is utilised to construct a validated simulation of the stretch blow moulding process. The accuracy obtained in the stretch blow moulding simulations highlights the capability of the explicit meshfree formulation, which has the potential to be applied to a wide range of large deformation phenomena.

[1]  L. Lucy.  A numerical approach to the testing of the fission hypothesis. , 1977 .

[2]  J. Monaghan,et al.  Smoothed particle hydrodynamics: Theory and application to non-spherical stars , 1977 .

[3]  G. Régnier,et al.  Simulation of the stretch blow moulding process: from the modelling of the microstructure evolution to the end-use elastic properties of polyethylene terephthalate bottles , 2012 .

[4]  J. Zimmer,et al.  Method for the evaluation of stretch blow molding simulations with free blow trials , 2013 .

[5]  C. Armstrong,et al.  Experimental Investigation of Stretch Blow Molding, Part 1: Instrumentation in an Industrial Environment , 2013 .

[6]  Karol Miller,et al.  A new method for essential boundary conditions imposition in explicit meshless methods , 2017 .

[7]  K. Bathe.  Finite Element Procedures , 1995 .

[8]  Marc Duflot,et al.  Meshless methods: A review and computer implementation aspects , 2008, Math. Comput. Simul..

[9]  Cecil Armstrong,et al.  Simulation of the stretch blow molding process of PET bottles , 1998 .

[10]  Shiyong Yan,et al.  A novel methodology to characterize the constitutive behaviour of polyethylene terephthalate for the stretch blow moulding process , 2017 .

[11]  Cecil Armstrong,et al.  Validating Injection Stretch-Blow Molding Simulation Through Free Blow Trials , 2010 .

[12]  S. K. Maiti,et al.  Crack propagation in non-homogenous materials: Evaluation of mixed-mode SIFs, T-stress and kinking angle using a variant of EFG Method , 2016 .

[13]  Z. J. Yang,et al.  Finite element modelling of stretch-blow moulding of PET bottles using Buckley model: Plant tests and effects of process conditions and material parameters , 2004 .

[14]  C. P. Buckley,et al.  Glass-rubber constitutive model for amorphous polymers near the glass transition , 1995 .

[15]  Philippe Lorong,et al.  The constrained natural element method (C-NEM) for treating thermal models involving moving interfaces , 2005 .

[16]  G. Marckmann,et al.  Finite element analysis of blow molding and thermoforming using a dynamic explicit procedure , 2001 .

[17]  Ted Belytschko,et al.  Numerical integration of the Galerkin weak form in meshfree methods , 1999 .

[18]  Jiun-Shyan Chen,et al.  An arbitrary order variationally consistent integration for Galerkin meshfree methods , 2013 .

[19]  Y. Çengel,et al.  Thermodynamics : An Engineering Approach , 1989 .

[20]  Xikui Li,et al.  Quadratically consistent one-point (QC1) quadrature for meshfree Galerkin methods , 2012 .

[21]  Mark Randolph,et al.  H-ADAPTIVE FE ANALYSIS OF ELASTO-PLASTIC NON-HOMOGENEOUS SOIL WITH LARGE DEFORMATION , 1998 .

[22]  T. Belytschko,et al.  Element‐free Galerkin methods , 1994 .

[23]  Wing Kam Liu,et al.  Reproducing kernel particle methods , 1995 .

[24]  Ted Belytschko,et al.  Nonlinear versions of flexurally superconvergent elements , 1988 .

[25]  J. Yvonnet,et al.  Optimization of the Thickness of PET Bottles during Stretch Blow Molding by Using a Mesh-free (Numerical) Method , 2009 .

[26]  E. Monteiro,et al.  On visco-elastic modelling of polyethylene terephthalate behaviour during multiaxial elongations slightly over the glass transition temperature , 2012 .

[27]  T. Belytschko,et al.  Stable particle methods based on Lagrangian kernels , 2004 .

[28]  T. A. Vilgis,et al.  The effect of entanglements in rubber elasticity , 1986 .

[29]  Henry Eyring,et al.  Mechanical Properties of Textiles, I , 1945 .

[30]  Fabrice Schmidt,et al.  Optimization of preform temperature distribution for the stretch‐blow molding of PET bottles: Infrared heating and blowing modeling , 2009 .

[31]  Jiun-Shyan Chen,et al.  A stabilized conforming nodal integration for Galerkin mesh-free methods , 2001 .

[32]  K. Y. Dai,et al.  A Smoothed Finite Element Method for Mechanics Problems , 2007 .

[33]  Chuanzeng Zhang,et al.  Crack growth modeling in elastic solids by the extended meshfree Galerkin radial point interpolation method , 2014 .

[34]  Guoqun Zhao,et al.  Bulk metal forming process simulation based on rigid-plastic/viscoplastic element free Galerkin method , 2008 .

[35]  Jiun-Shyan Chen,et al.  Non‐linear version of stabilized conforming nodal integration for Galerkin mesh‐free methods , 2002 .

[36]  Wing Kam Liu,et al.  Numerical simulations of strain localization in inelastic solids using mesh‐free methods , 2000 .

[37]  Guangyao Li,et al.  Element‐free Galerkin method for contact problems in metal forming analysis , 2001 .

[38]  L. Chevalier,et al.  Identification of a strain induced crystallisation model for PET under uni- and bi-axial loading: Influence of temperature dispersion , 2007 .

[39]  Michael A. Puso,et al.  Meshfree and finite element nodal integration methods , 2008 .

[40]  P. Lancaster,et al.  Surfaces generated by moving least squares methods , 1981 .

[41]  Kjell Mattiasson,et al.  Numerical results from large deflection beam and frame problems analysed by means of elliptic integrals , 1981 .

[42]  Shiyong Yan,et al.  Free-stretch-blow investigation of poly(ethylene terephthalate) over a large process window , 2017 .

[43]  Gui-Rong Liu,et al.  An Introduction to Meshfree Methods and Their Programming , 2005 .

[44]  Shiyong Yan,et al.  Finite element simulations of stretch-blow moulding with experimental validation over a broad process window , 2017 .

[45]  R. P. Ingel,et al.  STRESS POINTS FOR TENSION INSTABILITY IN SPH , 1997 .

[46]  R. S. Rivlin,et al.  Large elastic deformations of isotropic materials VI. Further results in the theory of torsion, shear and flexure , 1949, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[47]  K. Miller,et al.  A meshless Total Lagrangian explicit dynamics algorithm for surgical simulation , 2010 .

[48]  Ted Belytschko,et al.  Explicit Reproducing Kernel Particle Methods for large deformation problems , 1998 .