Plasma-treated switchable wettability of parylene-C surface

The wetting behavior of biomaterials is of great importance for the issues such as biofouling control and biocompatibility improvement. Therefore, tailoring of their wettability is particularly useful and has been attracting a lot of interests. This paper focuses on the modification of surface wettability on the parylene-C film, which is exclusively used as a coating material for insulating implantable biomedical devices. The oxygen (O2) and sulfur hexafluoride (SF6) plasma were applied to treat parylene-C samples successively. Super hydrophilic (~0°) and super hydrophobic (~160°) surfaces were achieved under very low plasma power. The Atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS) results strongly suggest that the surface roughness and the incorporation of oxygen or fluorine bonds on the surface are the two main factors accounting for the significant change of wettability. Moreover, the parylene-C surface has been proved to be switchable between super hydrophilicity and hydrophobicity by applying only an additional short O2 or SF6 plasma treatment, which greatly benefits the use of parylene-C in a wide range of biomedical applications.

[1]  Thomas J Webster,et al.  Endothelial and vascular smooth muscle cell function on poly(lactic-co-glycolic acid) with nano-structured surface features. , 2004, Biomaterials.

[2]  Bai Yang,et al.  Biomimetic polyimide nanotube arrays with slippery or sticky superhydrophobicity. , 2010, Journal of colloid and interface science.

[3]  Ravi S Kane,et al.  Antifouling Coatings: Recent Developments in the Design of Surfaces That Prevent Fouling by Proteins, Bacteria, and Marine Organisms , 2011, Advanced materials.

[4]  Igor A. Lavrov,et al.  Flexible parylene-based multielectrode array technology for high-density neural stimulation and recording , 2008 .

[5]  Yu-Chong Tai,et al.  Flexible Parylene-based Microelectrode Technology for Intraocular Retinal Prostheses , 2006, 2006 1st IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

[6]  Dong Sung Kim,et al.  Robust hydrophobic surfaces with various micropillar arrays , 2010 .

[7]  H. Erbil,et al.  Transformation of a Simple Plastic into a Superhydrophobic Surface , 2003, Science.

[8]  A. Khademhosseini,et al.  Microscale technologies for tissue engineering and biology. , 2006, Proceedings of the National Academy of Sciences of the United States of America.

[9]  Vikramaditya G. Yadav,et al.  Cell and protein compatibility of parylene-C surfaces. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[10]  G. Whitesides,et al.  Compatibility of mammalian cells on surfaces of poly(dimethylsiloxane). , 2004, Langmuir : the ACS journal of surfaces and colloids.

[11]  R. N. Wenzel RESISTANCE OF SOLID SURFACES TO WETTING BY WATER , 1936 .

[12]  A Tserepi,et al.  Mechanisms of oxygen plasma nanotexturing of organic polymer surfaces: from stable super hydrophilic to super hydrophobic surfaces. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[13]  Cato T Laurencin,et al.  Polymers as biomaterials for tissue engineering and controlled drug delivery. , 2006, Advances in biochemical engineering/biotechnology.

[14]  A. Cassie,et al.  Wettability of porous surfaces , 1944 .

[15]  J. Alderman,et al.  The surface energy of various biomaterials coated with adhesion molecules used in cell culture. , 2007, Colloids and surfaces. B, Biointerfaces.

[16]  Bo Lu,et al.  Highly flexible, transparent and patternable parylene-C superhydrophobic films with high and low adhesion , 2011, 2011 IEEE 24th International Conference on Micro Electro Mechanical Systems.

[17]  Pascal Colpo,et al.  Tuneable Rough Surfaces- A New Approach for Elaboration of Superhydrophobic Films , 2005 .

[18]  U. Steiner,et al.  Super-hydrophobic surfaces made from Teflon. , 2007, Soft matter.

[19]  Christopher K. Ober,et al.  Advances in polymers for anti-biofouling surfaces , 2008 .