Investigating Machining Characteristics and Degradation Rate of Biodegradable ZM21 Magnesium alloy in End Milling Process

[1]  Puneet Katyal,et al.  Effects of alloying elements on performance of biodegradable magnesium alloy , 2021, Materials Today: Proceedings.

[2]  Kamal Kumar,et al.  Multiresponse optimization of end milling process parameters on ZE41A Mg alloy using Taguchi and TOPSIS approach , 2021, Materials Today: Proceedings.

[3]  Kamal Kumar,et al.  Surface Characteristics and Corrosion Behavior of Wire Electrical Discharge Machining Processed Mg-4Zn Alloy , 2021, Journal of Materials Engineering and Performance.

[4]  Gurpreet Singh,et al.  Multi-response optimization while machining of stainless steel 316L using intelligent approach of grey theory and grey-TLBO , 2021 .

[5]  S. Datta,et al.  Machining Performance of Inconel 718 Under Dry, MQL, and Nanofluid MQL Conditions: Application of Coconut Oil (Base Fluid) and Multi-walled Carbon Nanotubes as Additives , 2020, Arabian Journal for Science and Engineering.

[6]  K. Aslantaş,et al.  Experimental Study on the Effect of Cutting Tool Geometry in Micro-Milling of Inconel 718 , 2020, Arabian Journal for Science and Engineering.

[7]  Ömer Seçgin.  Multi-objective Optimization of Ms58 Brass Machining Operation by Multi-axis CNC Lathe , 2020, Arabian Journal for Science and Engineering.

[8]  Kamal Kumar,et al.  Investigating TiO2–HA–PCL hybrid coating as an efficient corrosion resistant barrier of ZM21 Mg alloy , 2020 .

[9]  Kamal Kumar,et al.  Experimental Investigation and Optimization of Wire Electrical Discharge Machining for Surface Characteristics and Corrosion Rate of Biodegradable Mg Alloy , 2020, Journal of Materials Engineering and Performance.

[10]  C. Bolu,et al.  Comparative performance evaluation of TiO2, and MWCNTs nano-lubricant effects on surface roughness of AA8112 alloy during end-milling machining for sustainable manufacturing process , 2020, The International Journal of Advanced Manufacturing Technology.

[11]  P. Hariharan,et al.  Experimental investigation of dry, wet and cryogenic boring of AA 7075 alloy , 2019, Materials and Manufacturing Processes.

[12]  Weikang Zhao,et al.  Effect of Sn addition on the mechanical properties and bio-corrosion behavior of cytocompatible Mg–4Zn based alloys , 2019, Journal of Magnesium and Alloys.

[13]  F. Witte,et al.  Biodegradable Metals , 2018, Biomaterials Science.

[14]  Ender Hazir,et al.  Response Surface Methodology Integrated with Desirability Function and Genetic Algorithm Approach for the Optimization of CNC Machining Parameters , 2018, Arabian Journal for Science and Engineering.

[15]  N. L. Bhirud,et al.  Optimization of Process Parameters During End Milling and Prediction of Work Piece Temperature Rise , 2017 .

[16]  K. S. Amirthagadeswaran,et al.  Experimental investigation of machinability characteristics and multi-response optimization of end milling in aluminium composites using RSM based grey relational analysis , 2017 .

[17]  Peter J. Murphy,et al.  Enhancing the corrosion resistance of biodegradable Mg-based alloy by machining-induced surface integrity: influence of machining parameters on surface roughness and hardness , 2017 .

[18]  W. Świȩszkowski,et al.  In vitro degradation of ZM21 magnesium alloy in simulated body fluids. , 2016, Materials science & engineering. C, Materials for biological applications.

[19]  Liwei Lu,et al.  High speed cutting of AZ31 magnesium alloy , 2016 .

[20]  Jianfei Sun,et al.  Effect of Machining Parameters on Surface Integrity in High Speed Milling of Super Alloy GH4169/Inconel 718 , 2016 .

[21]  F. Mustapha,et al.  Analyzing the Effect of Machining Parameters Setting to the Surface Roughness during End Milling of CFRP-Aluminium Composite Laminates , 2016 .

[22]  P. Asokan,et al.  Effect of cryogenic cooling on machinability and surface quality of bio-degradable ZK60 Mg alloy , 2015 .

[23]  Dinghua Zhang,et al.  Optimization of process parameters for surface roughness and microhardness in dry milling of magnesium alloy using Taguchi with grey relational analysis , 2015, The International Journal of Advanced Manufacturing Technology.

[24]  T. Desaive,et al.  Mesenchymal stem cell and endothelial cell interaction restores endothelial permeability via paracrine hepatocyte growth factor in vitro , 2015, Critical Care.

[25]  A. Atrens,et al.  Influence of the chloride ion concentration on the corrosion of high-purity Mg, ZE41 and AZ91 in buffered Hank’s solution , 2014, Journal of Materials Science: Materials in Medicine.

[26]  Yinghe He,et al.  Effect of surface roughness on the in vitro degradation behaviour of a biodegradable magnesium-based alloy , 2013 .

[27]  B. Bugarski,et al.  Analysis of metal ion release from biomedical implants , 2013 .

[28]  Y. Gu,et al.  Long-term corrosion inhibition mechanism of microarc oxidation coated AZ31 Mg alloys for biomedical applications , 2013 .

[29]  F. Tavangarian,et al.  Improving degradation rate and apatite formation ability of nanostructure forsterite , 2011 .

[30]  Sandeep Grover,et al.  Simultaneous optimization of material removal rate and surface roughness for WEDM of WC-Co composite using grey relational analysis along with Taguchi method , 2011 .

[31]  Frank Witte,et al.  Degradable biomaterials based on magnesium corrosion , 2008 .

[32]  Tadashi Kokubo,et al.  How useful is SBF in predicting in vivo bone bioactivity? , 2006, Biomaterials.

[33]  T. Yue,et al.  The Effect of Machined Surface Condition on the Corrosion Behavior of Magnesium ZM51/SiC Composite , 2004 .

[34]  S. Ramakrishna,et al.  Biomedical applications of polymer-composite materials: a review , 2001 .

[35]  H. Tönshoff,et al.  The influence of tool coatings in machining of magnesium , 1997 .

[36]  B. Sunil,et al.  Developing composite of ZE41 magnesium alloy- calcium by friction stir processing for biodegradable implant applications , 2019, Materials Today: Proceedings.

[37]  Vanessa Hernández-Montes,et al.  Titanium dioxide coatings on magnesium alloys for biomaterials: A review , 2017 .

[38]  M. S. Sukumar,et al.  Optimization and Prediction of Parameters in Face Milling of Al-6061 Using Taguchi and ANN Approach , 2014 .

[39]  Yuebin Guo,et al.  Process mechanics and surface integrity by high-speed dry milling of biodegradable magnesium–calcium implant alloys , 2010 .

[40]  Berend Denkena,et al.  Advancing Cutting Technology , 2003 .