Mixing in microreactors: effectiveness of lamination segments as a form of feed on product distribution for multiple reactions

A mixing model in a microreactor was developed by using the principle of lamination segments. For four types of multiple reactions, the effects of lamination width and rate constants on the relation between the conversion of reactant and the yield of desired product were investigated by using CFD simulations. The simulation reveals that the lamination width greatly affects the yield for the desired product. In most cases, when the conversion of the reactant is the same, the yield of the desired product for perfect mixing is higher when reactants are fed with lamination segments. An exception is that the rate constant of the reaction producing the desired product is much smaller than that consuming the desired product, and the order of the former reaction is less than the latter. In this case, the feed with large lamination width shows higher yield of the desired product than the feed with perfectly mixed. In this study, the maximum lamination width which shows almost the same performance as the case of perfect mixing was derived for various multiple reactions and reaction conditions. The results provide effective information for the design of microreactors and of the measurement system of rate constants of multiple reactions.

[1]  Klavs F. Jensen,et al.  Microfabricated packed‐bed reactor for phosgene synthesis , 2001 .

[2]  Jerzy Bałdyga,et al.  Interaction between chemical reactions and mixing on various scales , 1997 .

[3]  S. H. Chen,et al.  The velocity profile and resultant mixing with chemical reaction in rotating tubular flow , 1987 .

[4]  V. Balakotaiah,et al.  A novel approach for describing mixing effects in homogeneous reactors , 2003 .

[5]  W. Ranz,et al.  Mixing and chemical reactions: A contrast between fast and slow reactions , 1983 .

[6]  J. C. Schouten,et al.  Design of a microstructured reactor with integrated heat-exchanger for optimum performance of a highly exothermic reaction , 2001 .

[7]  Rodney O. Fox,et al.  On the relationship between Lagrangian micromixing models and computational fluid dynamics 1 This contribution is dedicated to the remembrance of Professor Jaques Villermaux. 1 , 1998 .

[8]  Reginald Mann,et al.  Macro-mixing, partial segregation and 3-D selectivity fields inside a semi-batch stirred reactor , 2001 .

[9]  J. Ottino.  Lamellar mixing models for structured chemical reactions and their relationship to statistical models; Macro- and micromixing and the problem of averages , 1980 .

[10]  Reactor yield at intermediate mixing levels—an extension of Van de Vusse's analysis , 1966 .

[11]  S. Ehlers,et al.  Mixing in the offstream of a microchannel system , 2000 .

[12]  Frank Einar Kruis,et al.  Mixing and reaction in a tubular jet reactor: A comparison of experiments with a model based on a prescribed PDF , 1996 .

[13]  Wolfgang Ehrfeld,et al.  Microreactors: New Technology for Modern Chemistry , 2000 .

[14]  S. Cox,et al.  The influence of segregation on the yield for a series–parallel reaction , 1998 .

[15]  R. Besser,et al.  Experimental study of hydrocarbon hydrogenation and dehydrogenation reactions in silicon microfabricated reactors of two different geometries , 2003 .

[16]  R. Chambers,et al.  Microreactors for elemental fluorine , 1999 .

[17]  Wolfgang Ehrfeld,et al.  Characterization of Mixing in Micromixers by a Test Reaction: Single Mixing Units and Mixer Arrays , 1999 .