论文信息 - Calculations of internal stresses during sintering in two dimensions

Calculations of internal stresses during sintering in two dimensions

The internal stresses which may arise during sintering are modeled by calculating the behavior of coupled strings of circular particles. Strings consisting of large and small particles are connected in parallel and are allowed to sinter by surface and grain boundary diffusion. The strings consisting of the smaller particles experience tensile stresses, since their shrinkage is inhibited by the slower sintering of the larger particles. These internal stresses are followed as a function of time. The calculations provide a first-order estimate of the internal stresses which may arise during the sintering of irregular arrays of particles.

J. Schneibel | Wen Zhang

[1] Wen Zhang,et al. Using MOL to solve a high order nonlinear PDE with a moving boundary in the simulation of a sintering process , 1996 .

[2] J. Schneibel,et al. The sintering of two particles by surface and grain boundary diffusion -- A two-dimensional numerical study , 1995 .

[3] H. Riedel,et al. Quasi-equilibrium sintering for coupled grain-boundary and surface diffusion , 1995 .

[4] J. Schneibel,et al. Sintering of regular two-dimensional arrays of particles surface and grain boundary diffusion , 1994 .

[5] R. M. Cannon,et al. Interplay of Sintering Microstructures, Driving Forces, and Mass Transport Mechanisms , 1989 .

[6] Rajendra K. Bordia,et al. On constrained sintering—I. Constitutive model for a sintering body , 1988 .

[7] G. Scherer,et al. On constrained sintering-II. Comparison of constitutive models , 1988 .

[8] G. Scherer,et al. On constrained sintering-III. Rigid inclusions , 1988 .

[9] H. Exner. Neck shape and limiting GBDSD ratios in solid state sintering , 1987 .

[10] R. M. Cannon,et al. Viscoelastic stresses and sintering damage in heterogeneous powder compacts , 1986 .

[11] G. Scherer,et al. Viscoelastic-Elastic Composites: II, Sandwich Seal , 1982 .

[12] W. Nix,et al. A numerical study of cavity growth controlled by coupled surface and grain boundary diffusion , 1982 .

[13] W. Mullins. Theory of Thermal Grooving , 1957 .