Detection of bolt loosening in C–C composite thermal protection panels: I. Diagnostic principle

A concept demonstrator of the structural health monitoring (SHM) system was developed to autonomously detect the degradation of the mechanical integrity of the standoff carbon–carbon (C–C) thermal protection system (TPS) panels. This system enables us to identify the location of the loosened bolts, as well as to predict the torque levels of those bolts accordingly. In the process of building the proposed SHM prototype, efforts have been focused primarily on developing a trustworthy diagnostic scheme and a responsive sensor suite. In part I of the study, an attenuation-based diagnostic method was proposed to assess the fastener integrity by observing the attenuation patterns of the resultant sensor signals. The attenuation-based method is based on the damping phenomena of ultrasonic waves across the bolted joints. The major advantage of the attenuation-based method over the conventional diagnostic methods is its local sensing capability of loosened brackets. The method can further discriminate the two major failure modes within a bracket: panel-joint loosening and bracket-joint loosening. The theoretical explanation of the attenuation-based method is performed using micro-contact theory and structural/internal damping principles, followed by parametric model studies and appropriate hypothesis testing.

[1]  William Braisted,et al.  The structural health monitoring of a mechanically attached thermal protection system , 2004 .

[2]  L. Brillouin,et al.  Wave Propagation in Periodic Structures , 1946 .

[3]  Daniel J. Inman,et al.  Practical issues of activating self-repairing bolted joints , 2004 .

[4]  B. Auld,et al.  Acoustic fields and waves in solids , 1973 .

[5]  Charles R. Farrar,et al.  Structural Health Monitoring Using Statistical Pattern Recognition Techniques , 2001 .

[6]  Peter Lancaster,et al.  Curve and surface fitting - an introduction , 1986 .

[7]  Sp Rawal,et al.  Effect of Microstructure on Damping in Metal-Matrix Composites: A Review , 1992 .

[8]  Darryll J. Pines,et al.  Damage assessment in a bolted lap joint , 1998, Smart Structures.

[9]  B. Auld.  Acoustic fields and waves in solids. Vol. 1 , 1990 .

[10]  Paul S. Fischbeck,et al.  Risk Management for the Tiles of the Space Shuttle , 1994 .

[11]  Craig A. Rogers,et al.  Energy dissipation through joints: theory and experiments , 2000 .

[12]  Zvi Hashin,et al.  Complex moduli of viscoelastic composites—I. General theory and application to particulate composites , 1970 .

[13]  D. L. Harris,et al.  Measurement of Damping of Composite Materials for Turbomachinery Applications (MSFC Center Director's Discretionary Fund Final Report, Project No. 94-05) , 1998 .

[14]  S. Rokhlin,et al.  An ultrasonic interface‐wave method for predicting the strength of adhesive bonds , 1981 .

[15]  C. Liang,et al.  Truss Structure Integrity Identification Using PZT Sensor-Actuator , 1995 .

[16]  F. Chang,et al.  Detection and monitoring of hidden fatigue crack growth using a built-in piezoelectric sensor/actuator network: I. Diagnostics , 2004 .

[17]  T. A. Gray,et al.  The interaction of ultrasound with imperfect interfaces: Experimental studies of model structures , 1992 .

[18]  Vikram K. Kinra,et al.  Modeling and Measurement of Axial and Flexural Damping in Metal-Matrix Composites , 1992 .

[19]  Michael D. Todd,et al.  Use of data-driven phase space models in assessing the strength of a bolted connection in a composite beam , 2004 .

[20]  K. Johnson.  Contact Mechanics: Frontmatter , 1985 .