Potential of a piezoelectric energy harvester from sea waves

A sea wave energy harvester from the longitudinal wave motion of water particles is developed. The harvester consisting of a cantilever substrate attached by piezoelectric patches and a proof mass is used to collect electrical energy owing to the electromechanical coupling effect of the piezoelectric patches from the longitudinal wave motion. To describe the energy harvesting process, a mathematical model is developed to calculate the output charge and voltage from the piezoelectric patches according to the Airy linear wave theory and classical elastic beam model. Results show that the mean value of the generated power increases with the increase in the ratio of the width to the thickness of the cantilever, the wave height, the sea depth (which equals to the cantilever height in this study), the ratio of the proof mass to the cantilever mass, and the ratio of the sea depth to the wave length. A value of the power up to 55 W can be realized for a practical sea wave with the values of the sea depth, wave height and wave length to be 3 m, 2 m, and 15 m, respectively. The collected power harvesting with respect to different categories of the sea waves are provided. Our simulations also show the generated electric power can be further increased by an increase in dimensions of the harvester considering the scale effect. This research develops a new technique for energy harvesting from sea waves by piezoelectric energy harvesters.

[1]  Hod Lipson,et al.  Vertical-Stalk Flapping-Leaf Generator for Wind Energy Harvesting , 2009, Volume 2: Multifunctional Materials; Enabling Technologies and Integrated System Design; Structural Health Monitoring/NDE; Bio-Inspired Smart Materials and Structures.

[2]  Xiaotong Gao,et al.  Flow Energy Harvesting Using Piezoelectric Cantilevers With Cylindrical Extension , 2013, IEEE Transactions on Industrial Electronics.

[3]  Ephrahim Garcia,et al.  A Timoshenko beam model for cantilevered piezoelectric energy harvesters , 2010 .

[4]  J. Rastegar,et al.  Novel two-stage piezoelectric-based ocean wave energy harvesters for moored or unmoored buoys , 2009, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[5]  Bernard H. Stark,et al.  MEMS electrostatic micropower generator for low frequency operation , 2004 .

[6]  S. Beeby,et al.  Energy harvesting vibration sources for microsystems applications , 2006 .

[7]  J. Crease.  The Dynamics of the Upper Ocean , 1967 .

[8]  F. Campanile,et al.  Wave Energy Converter through Piezoelectric Polymers , 2007 .

[9]  Francis C. Moon,et al.  Modal Sensors/Actuators , 1990 .

[10]  Song-Yul Choe,et al.  Modeling and analysis of a bimorph piezoelectric cantilever beam for voltage generation , 2007 .

[11]  Quan Wang,et al.  Optimal design of a piezoelectric coupled beam for power harvesting , 2012 .

[12]  Paul K. Wright,et al.  Alternative Geometries for Increasing Power Density in Vibration Energy Scavenging for Wireless Sensor Networks , 2005 .

[13]  R. B. Yates,et al.  Analysis Of A Micro-electric Generator For Microsystems , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[14]  Henry A. Sodano,et al.  A review of power harvesting using piezoelectric materials (2003–2006) , 2007 .

[15]  Joseph R. Burns,et al.  The Energy Harvesting Eel: a small subsurface ocean/river power generator , 2001 .

[16]  Henry A. Sodano,et al.  Model of a single mode energy harvester and properties for optimal power generation , 2008 .

[17]  Paolo Boccotti,et al.  Wave Mechanics for Ocean Engineering , 2011 .

[18]  Alper Erturk,et al.  Piezoelectric energy harvesting for civil infrastructure system applications: Moving loads and surface strain fluctuations , 2011 .

[19]  Yuantai Hu,et al.  A piezoelectric power harvester with adjustable frequency through axial preloads , 2007 .

[20]  D. Inman,et al.  Comparison of Piezoelectric Energy Harvesting Devices for Recharging Batteries , 2005 .

[21]  J. Falnes.  Ocean Waves and Oscillating Systems , 2002 .

[22]  D.P. Arnold,et al.  Review of Microscale Magnetic Power Generation , 2007, IEEE Transactions on Magnetics.

[23]  Daniel J. Inman,et al.  Modeling of Piezoelectric Energy Harvesting from an L-shaped Beam-mass Structure with an Application to UAVs , 2009 .

[25]  Young Hun Jeong,et al.  Performance of unimorph cantilever generator using Cr/Nb doped Pb(Zr0.54Ti0.46)O3 thick film for energy harvesting device applications , 2013 .

[26]  H. J.,et al.  Hydrodynamics , 1924, Nature.

[27]  Michael I. Friswell,et al.  Analysis of energy harvesters for highway bridges , 2011 .