The Pulsed Ultrasonic Backscatter Polar Scan and its Applications for NDT and Material Characterization

In a conventional ultrasonic polar scan (UPS) experiment, the amplitude or time-of-flight-diffraction (TOFD) values of the transmitted and/or reflected acoustic pulse are recorded for a wide range of incidence angles, in view of gaining knowledge about the elastic properties at the insonified material spot. Here we apply the pulsed UPS technique and investigate the backscattered signal, resulting in the ultrasonic backscatter polar scan (UBPS). It is shown that a UPBS contains a blueprint of geometrically related features of the insonified material spot which can be of particular interest for various industrial applications. We applied the UBPS for (i) the determination of the stacking sequence of a cross-ply composite laminate, (ii) the semi-quantification of a multidirectional microscopic surface corrugation, (iii) the detection of corrosion in an early stage as well as (iv) the detection and the localization of a closed surface breaking crack.

[1]  Soji Sasaki.  Back Reflection of Ultrasonic Wave Obliquely Incident to Solid Surface in Water , 1963 .

[2]  W. Paepegem,et al.  Extraction of bulk wave characteristics from a pulsed ultrasonic polar scan , 2014 .

[3]  Francesco Aymerich,et al.  Ultrasonic evaluation of matrix damage in impacted composite laminates , 2000 .

[4]  Yueming Li,et al.  An automated radiographic NDT system for weld inspection: Part II—Flaw detection , 1998 .

[5]  J. Degrieck,et al.  Ultrasonic polar scans: numerical simulation on generally anisotropic media. , 2006, Ultrasonics.

[6]  E. Maire,et al.  In Situ Experiments with X ray Tomography: an Attractive Tool for Experimental Mechanics , 2010 .

[7]  G. Busse,et al.  Thermal wave imaging with phase sensitive modulated thermography , 1992 .

[8]  K. Maslov,et al.  Ultrasonic Ply-by-Ply Detection of Matrix Cracks in Laminated Composites , 2005 .

[9]  Douglas E. Adams,et al.  Crack Detection in an Embedded Spindle using Broadband Modal Excitation , 2008 .

[10]  A. Norris.  Back reflection of ultrasonic waves from a liquid–solid interface , 1983 .

[11]  P. Nagy,et al.  Increased incoherent backscattering from a liquid-solid interface at the Rayleigh angle , 1994 .

[12]  Experimental and numerical polar scans of several anisotropic materials using pulsed and harmonic ultrasonic beams , 2011 .

[13]  W. Paepegem,et al.  Determination of the fiber direction and the C-tensor of a UD carbon/epoxy composite by means of the ultrasonic polar scan , 2013 .

[14]  T. Warren Liao,et al.  An automated radiographic NDT system for weld inspection: Part I — Weld extraction , 1996 .

[15]  M. Lizaranzu,et al.  Comparison and analysis of non-destructive testing techniques suitable for delamination inspection in wind turbine blades , 2011 .

[16]  F. Lanza di Scalea,et al.  Determination of Defect Depth and Size Using Virtual Heat Sources in Pulsed Infrared Thermography , 2013 .

[17]  J. Degrieck,et al.  Simulations of harmonic and pulsed ultrasonic polar scans , 2006 .

[18]  Jung-Ryul Lee,et al.  A Fully Non-Contact Ultrasonic Propagation Imaging System for Closed Surface Crack Evaluation , 2012 .

[19]  Peter B. Nagy,et al.  Measurements of backscattered leaky lamb waves in composite plates , 1988 .

[20]  Joris Degrieck,et al.  Strain Measurements of Composite Laminates with Embedded Fibre Bragg Gratings: Criticism and Opportunities for Research , 2010, Sensors.

[21]  The applications of ultrasonic backward radiation from a layered substrate submerged in liquid , 2000 .

[22]  M. Sayir,et al.  Composite ceramic-metal plates tested with flexural waves and holography , 2001 .

[23]  Igor Solodov,et al.  Resonant ultrasound spectroscopy of defects: Case study of flat-bottomed holes , 2013 .

[24]  J. Rose.  Ultrasonic Waves in Solid Media , 1999 .

[25]  John C. Moulder,et al.  Review of Advances in Quantitative Eddy Current Nondestructive Evaluation , 1999 .

[26]  High-sensitivity laser-based ultrasonic C-scan system for materials inspection , 1999 .

[27]  Mamoru Shimazaki,et al.  Delamination detection in composite laminates using dispersion change based on mode conversion of Lamb waves , 2010 .

[28]  Oswald Leroy,et al.  Inhomogeneous plane-wave scattering and mode stimulation on periodic rough surfaces , 1996 .

[29]  Alejandro Enfedaque,et al.  Automatic quantification of matrix cracking and fiber rotation by X-ray computed tomography in shear-deformed carbon fiber-reinforced laminates , 2014 .