The mechanical and thermal setup of the GLORIA spectrometer

Abstract. The novel airborne Gimballed Limb Observer for Radiance Imaging of the Atmosphere (GLORIA) measures infrared emission of atmospheric trace constituents. GLORIA comprises a cooled imaging Fourier transform spectrometer, which is operated in unpressurized aircraft compartments at ambient temperature. The whole spectrometer is pointed by the gimbal towards the atmospheric target. In order to reach the required sensitivity for atmospheric emission measurements, the spectrometer optics needs to operate at a temperature below 220 K. A lightweight and compact design is mandatory due to limited space and high agility requirements. The cooled optical system needs to withstand high pressure and temperature gradients, humidity, and vibrations. A new cooling system based on carbon dioxide and liquid nitrogen combined with high-performance insulation has been developed to meet the mechanical, thermal, and logistical demands. The challenging mechanical and spatial requirements lead to the development of a novel rigid linear slide design in order to achieve the large optical path difference for high spectral resolution. This paper describes the mechanical and thermal setup of GLORIA and presents the performance results on two different research aircrafts.

[1]  Martin Riese,et al.  Cryogenic infrared spectrometers and telescopes for the atmosphere: new frontiers , 2004, SPIE Remote Sensing.

[2]  Tom Neubert,et al.  Level 0 to 1 processing of the imaging Fourier transform spectrometer GLORIA: generation of radiometrically and spectrally calibrated spectra , 2014 .

[3]  Pauli Heikkinen,et al.  Calibration of sealed HCl cells used for TCCON instrumental line shape monitoring , 2013 .

[4]  Johannes Orphal,et al.  Instrument concept of the imaging Fourier transform spectrometer GLORIA , 2014 .

[5]  C. Piesch,et al.  Design of a MIPAS Instrument for high-altitude aircraft , 1996 .

[6]  J W Brault,et al.  New approach to high-precision Fourier transform spectrometer design. , 1996, Applied optics.

[7]  B Carli,et al.  Design of an efficient broadband far-infrared Fourier-transform spectrometer. , 1999, Applied optics.

[8]  Peter Preusse,et al.  The in-flight blackbody calibration system for the GLORIA interferometer on board an airborne research platform , 2013 .

[9]  V. Kunde,et al.  Cryogenic Fourier spectrometer for measuring trace species in the lower stratosphere. , 1988, Applied optics.

[10]  Jan Haisma,et al.  Contact bonding, including direct-bonding in a historical and recent context of materials science and technology, physics and chemistry historical review in a broader scope and comparative outlook , 2002 .

[11]  Guido Maucher,et al.  Design and characterization of the balloon-borne Michelson Interferometer for Passive Atmospheric Sounding (MIPAS-B2). , 2004, Applied optics.

[12]  J. Brault,et al.  Ghosts and artifacts in Fourier-transform spectrometry. , 1996, Applied optics.

[13]  Johannes Orphal,et al.  Gimballed Limb Observer for Radiance Imaging of the Atmosphere (GLORIA) scientific objectives , 2014 .

[14]  Monika Krautstrunk,et al.  The Transition From FALCON to HALO Era Airborne Atmospheric Research , 2012 .

[15]  Wolfgang Kimming.  Das Abtastverfahren der Interferogramme des flugzeuggetragenen Fourierspektrometers MIPAS-STR , 2001 .

[16]  M. Endemann.  MIPAS Instrument Concept and Performance , 2000 .

[17]  Hubert Schwab,et al.  Vacuum Insulation Panels – Exciting Thermal Properties and Most Challenging Applications , 2006 .