Effect of mixing methods on the electrical properties of cementitious composites incorporating different carbon-based materials

Abstract Special attributes such as self-sensing ability could be included in conventional concrete-like materials, using carbon-based materials such as carbon nanotubes (CNT), graphene nanoplatelets (GNP) and carbon fibers (CF), which have recently come to the forefront due to their superior mechanical, thermal and electrical properties. However, their non-uniform distribution in cementitious systems stands in the way of taking full advantage of their benefits. To address this issue, an experimental study was undertaken, proposing several mixing methods to achieve uniform distribution. The performance of each method was assessed based on electrical resistivity (ER) and compressive strength measurements. Continuous reductions in ER measurements were observed with time, regardless of the mixing method and carbon-based materials used. Ultrasonication did not appear to be as useful as mechanical mixing with shear effect in terms of ER and compressive strength. Test results revealed that using longer CF (12 mm) in cementitious composites was the best way to tailor matrix properties in terms of electrical conductivity and compressive strength. CF was also easy to mix and has a relatively lower manufacturing cost than other electrically conductive carbon-based materials.

[1]  Ardavan Yazdanbakhsh,et al.  A quantitative method for analyzing the dispersion and agglomeration of nano-particles in composite materials , 2011 .

[2]  K. Khayat,et al.  Simple field tests to characterize fluidity and washout resistance of structural cement grout , 1998 .

[3]  Ken P. Chong,et al.  Health Monitoring of Civil Structures , 1998 .

[4]  D.D.L. Chung,et al.  Piezoresistivity-based strain sensing in carbon fiber-reinforced cement , 2007 .

[5]  G. Chan,et al.  Growth of Cement Hydration Products on Single‐Walled Carbon Nanotubes , 2009 .

[6]  Florence Sanchez,et al.  Microstructure and macroscopic properties of hybrid carbon nanofiber/silica fume cement composites , 2009 .

[7]  Mohamed Saafi,et al.  Multifunctional properties of carbon nanotube/fly ash geopolymer nanocomposites , 2013 .

[8]  S. Senturia.  Microsystem Design , 2000 .

[9]  Xiaohua Zhao,et al.  Mechanical behavior and microstructure of cement composites incorporating surface-treated multi-walled carbon nanotubes , 2005 .

[10]  Jorge Iván Tobón,et al.  Influence of super plasticizer and Ca(OH)2 on the stability of functionalized multi-walled carbon nanotubes dispersions for cement composites applications , 2013 .

[11]  Parviz Soroushian,et al.  Surface-modified graphite nanomaterials for improved reinforcement efficiency in cementitious paste , 2013 .

[12]  Eil Kwon,et al.  A carbon nanotube/cement composite with piezoresistive properties , 2009 .

[13]  A. Chaipanich,et al.  Behavior of multi-walled carbon nanotubes on the porosity and microstructure of cement-based materials , 2011 .

[14]  D. Chung,et al.  Piezoresistive Cement-Based Materials for Strain Sensing , 2002 .

[15]  Rashid K. Abu Al-Rub,et al.  Carbon Nanotubes and Carbon Nanofibers for Enhancing the Mechanical Properties of Nanocomposite Cementitious Materials , 2011 .

[16]  Chung Bang Yun,et al.  Multiple Crack Detection of Concrete Structures Using Impedance-based Structural Health Monitoring Techniques , 2006 .

[17]  Xiaohua Zhao,et al.  Pressure-sensitive properties and microstructure of carbon nanotube reinforced cement composites , 2007 .

[18]  Bing Chen,et al.  Conductivity of carbon fiber reinforced cement-based composites , 2004 .

[19]  Haeng-Ki Lee,et al.  Enhanced effect of carbon nanotube on mechanical and electrical properties of cement composites by incorporation of silica fume , 2014 .

[20]  Donald E. Macphee,et al.  A physico-chemical basis for novel cementitious binders , 2011 .

[21]  Jinsong Leng,et al.  Structural health monitoring of concrete cylinders using protected fibre optic sensors , 2006 .

[22]  Ardavan Yazdanbakhsh,et al.  Dispersion quantification of inclusions in composites , 2011 .

[23]  W De Corte,et al.  A case study on strain gauge measurements on large post-tensioned concrete beams of a railway support structure , 2003 .

[24]  Viktor Mechtcherine,et al.  Dispersion of carbon nanotubes and its influence on the mechanical properties of the cement matrix , 2012 .

[25]  Giuseppe Andrea Ferro,et al.  Influence of carbon nanotubes structure on the mechanical behavior of cement composites , 2009 .

[26]  Lai-fei Cheng,et al.  Electromagnetic wave absorption properties of graphene modified with carbon nanotube/poly(dimethyl siloxane) composites , 2014 .

[27]  V. C. Moore,et al.  Individually suspended single-walled carbon nanotubes in various surfactants , 2003 .