Detection and quantitative evaluation of defects in glass fiber reinforced plastic laminates by microwaves

Abstract A novel method using microwaves is proposed to detect and evaluate defects in glass fiber reinforced plastic (GFRP) laminates. A thin circular plastic film simulating delamination was inserted in GFRP laminates and was detected using microwave reflectometry. A focusing mirror sensor consisting of a horn antenna and two metal mirrors was used to improve the measurement resolution. In addition, the thickness of the film was calculated using a proposed model based on microwave propagation theory. Measuring the variation in the amplitude of the microwave reflectivity, a 7.5-μm-thick film was successfully detected in a 3-mm-thick GFRP laminate. Moreover, the calculated results of the inserted film thickness had a high degree of accuracy.

[1]  Antonio Nanni,et al.  Microwave detection of delaminations between fiber reinforced polymer (FRP) composite and hardened cement paste , 2002 .

[2]  Giovanni Maria Carlomagno,et al.  Geometrical Limitations to Detection of Defects in Composites by Means of Infrared Thermography , 2004 .

[3]  Giovanni Maria Carlomagno,et al.  Infrared thermography of impact-driven thermal effects , 2009 .

[4]  Giovanni Maria Carlomagno,et al.  Impact damage in GFRP: New insights with infrared thermography , 2010 .

[5]  M. A. Verges,et al.  X-ray computed microtomography of internal damage in fiber reinforced polymer matrix composites , 2005 .

[6]  Giovanni Maria Carlomagno,et al.  REVIEW ARICLE: Recent advances in the use of infrared thermography , 2004 .

[7]  Dai Gil Lee,et al.  Laminating rule for predicting the dielectric properties of E-glass/epoxy laminate composite , 2007 .

[8]  Giovanni Maria Carlomagno,et al.  Application of infrared thermography to adhesion science , 2006 .

[9]  M. Lizaranzu,et al.  Comparison and analysis of non-destructive testing techniques suitable for delamination inspection in wind turbine blades , 2011 .

[10]  J. C. Bennett,et al.  Calibration techniques for free space reflection coefficient measurements , 1992 .

[11]  Joy P. Dunkers,et al.  Comparison of optical coherence tomography, x-ray computed tomography, and confocal microscopy results from an impact damaged epoxy/e-glass composite , 2002 .

[12]  R. Zoughi,et al.  Near-Field Microwave Detection of Disbond in Carbon Fiber Reinforced Polymer Composites Used for Strengthening Cement-Based Structures and Disbond Repair Verification , 2004 .

[13]  D. Pozar.  Microwave Engineering , 1990 .

[14]  Y. Kagawa,et al.  Dielectric properties and noncontact damage detection of plain-woven fabric glass fiber reinforced epoxy matrix composites using millimeter wavelength microwave , 2012 .

[15]  Min Zhao,et al.  Calibrated Free-Space Microwave Measurements With an Ultrawideband Reflectometer-Antenna System , 2006, IEEE Microwave and Wireless Components Letters.