An Electronically Tunable SIMO Biquad Filter Using CCCCTA

This paper presents an electronically tunable single input multiple output (SIMO) biquad filter using current controlled current conveyor transconductance amplifiers (CCCCTAs). The proposed filter employs only two CCCCTA and three capacitors out of which two are permanently grounded. The proposed filter realizes low pass (LP), band pass (BP) and high pass (HP) responses in voltage form as well as in transadmittance form simultaneously. The circuit can also realize band reject (BR) as well as all pass (AP) responses in transadmittance form, with interconnection of relevant output currents. The circuit enjoys an independent current control of pole frequency and bandwidth as well as quality factor and bandwidth. Both the active and passive sensitivities are no more than unity. The validity of proposed filter is verified through PSPICE simulations.

[1]  Gordon W. Roberts,et al.  All current-mode frequency selective circuits , 1989 .

[2]  Chun-Li Hou,et al.  A Filter with Three Voltage-inputs and One Voltage-output and One Current-output Using Current Conveyors , 2004 .

[3]  A. Fabre,et al.  High frequency applications based on a new current controlled conveyor , 1996 .

[4]  Jie Wu,et al.  Current-mode band-pass ladder filters using OTAs , 1998 .

[5]  Uğur Çam.  A New Transadmittance Type First-Order Allpass Filter Employing Single Third Generation Current Conveyor , 2005 .

[6]  Nisar A. Shah,et al.  CDTA based universal transadmittance filter , 2007 .

[7]  Jiin-Long Lee,et al.  Insensitive current/voltage-mode filters using FTFNs , 1996 .

[8]  Hakan Kuntman,et al.  High-output-impedance transadmittance type continuous-time multifunction filter with minimum active elements , 2001 .

[9]  M. Siripruchyanun,et al.  Current controlled current conveyor transconductance amplifier (CCCCTA): a building block for analog signal processing , 2007, 2007 International Symposium on Communications and Information Technologies.

[10]  Alain Fabre,et al.  Current controlled bandpass filter based on translinear conveyors , 1995 .

[11]  Montree Siripruchyanun,et al.  Current controlled current conveyor transconductance amplifier (CCCCTA): a building block for analog signal processing , 2008 .

[12]  D. R. Frey,et al.  Log-domain filtering: An approach to current-mode fil-tering , 1993 .

[13]  Sud Hanshu Maheshwari,et al.  High performance voltage - mode multifunction filter with minimum component count , 2008 .

[14]  Muhammad Taher Abuelma'atti,et al.  A Novel Mixed-Mode CCII-Based Filter , 2004 .

[15]  Chun-Ming Chang.  Multifunction biquadratic filters using current conveyors , 1997 .

[16]  N. A. Shah,et al.  SITO High Output Impedance Transadmittance Filter Using FTFNs , 2004 .

[17]  Sajal K. Paul,et al.  A new mixed mode biquad using reduced number of active and passive elements , 2006, IEICE Electron. Express.

[18]  Saudi Arabia,et al.  A NOVEL MIXED-MODE CURRENT-CONTROLLED CURRENT-CONVEYOR-BASED FILTER , 2003 .

[19]  Jie Wu,et al.  Universal voltage- and current-mode OTAs based biquads , 1998 .

[20]  SUDHANSHU MAHESHWARI.  Current-mode filters with high output impedance and employing only grounded components , 2008 .

[21]  Abdhesh K. Singh,et al.  New OTA-C universal current-mode/trans-admittance biquads , 2005, IEICE Electron. Express.

[22]  Ming-Jye Lee,et al.  Voltage-mode multifunction filter with single input and three outputs using two compound current conveyors , 1999 .