Development Status of a SiC-Foam Based Flow Channel Insert for a U.S.-ITER DCLL TBM
暂无分享,去创建一个
Sergey Smolentsev | Shahram Sharafat | Y. Katoh | Nasr Ghoniem | N. Ghoniem | S. Sharafat | Y. Katoh | S. Smolentsev | N. Morley | A. Aoyama | Aaron Aoyama | Brian Williams | Neil Morley | B. Williams | Yutai Katoh
[1] Neil B. Morley,et al. ITER-Test blanket module functional materials , 2007 .
[2] Mark S. Tillack,et al. Overview of the ARIES-RS reversed-shear tokamak power plant study , 1997 .
[3] Mohamed A. Abdou,et al. Characterization of key magnetohydrodynamic phenomena in PbLi flows for the US DCLL blanket , 2008 .
[4] Yves Poitevin,et al. The EU advanced lead lithium blanket concept using SiCf/SiC flow channel inserts as electrical and thermal insulators , 2001 .
[5] Gordon H. LaTourette. Semi-Annual Progress Report , 1965 .
[6] Bruce A Pint,et al. Investigation of Pb-Li compatibility issues for the dual coolant blanket concept , 2007 .
[7] Steven J. Zinkle,et al. An overview of dual coolant Pb–17Li breeder first wall and blanket concept development for the US ITER-TBM design , 2006 .
[8] Neil B. Morley,et al. Numerical analysis of MHD flow and heat transfer in a poloidal channel of the DCLL blanket with a SiCf/SiC flow channel insert , 2006 .
[9] G. Youngblood,et al. Effects of irradiation and post-irradiation annealing on the thermal conductivity/diffusivity of monolithic SiC and f-SiC/SiC composites , 2004 .
[10] The high temperature compressive strength of non-oxide ceramic foams , 1996 .