Iterative feedback bio-printing-derived cell-laden hydrogel scaffolds with optimal geometrical fidelity and cellular controllability

[1]  Ali Khademhosseini,et al.  Advances in engineering hydrogels , 2017, Science.

[2]  Qing Gao,et al.  Research on the printability of hydrogels in 3D bioprinting , 2016, Scientific Reports.

[3]  Keekyoung Kim,et al.  3D bioprinting for engineering complex tissues. , 2016, Biotechnology advances.

[4]  Xiongbiao Chen,et al.  Influence of Flow Behavior of Alginate-Cell Suspensions on Cell Viability and Proliferation. , 2016, Tissue engineering. Part C, Methods.

[5]  Wei Zhu,et al.  Design and 3D Printing of Hydrogel Scaffolds with Fractal Geometries. , 2016, ACS biomaterials science & engineering.

[6]  Ling Wang,et al.  Automated quantitative assessment of three-dimensional bioprinted hydrogel scaffolds using optical coherence tomography. , 2016, Biomedical optics express.

[7]  B. Yao,et al.  3D bioprinted extracellular matrix mimics facilitate directed differentiation of epithelial progenitors for sweat gland regeneration. , 2016, Acta biomaterialia.

[8]  James J. Yoo,et al.  A 3D bioprinting system to produce human-scale tissue constructs with structural integrity , 2016, Nature Biotechnology.

[9]  W. Tan,et al.  A combinatorial variation in surface chemistry and pore size of three-dimensional porous poly(ε-caprolactone) scaffolds modulates the behaviors of mesenchymal stem cells. , 2016, Materials science & engineering. C, Materials for biological applications.

[10]  Horst Fischer,et al.  Controlling Shear Stress in 3D Bioprinting is a Key Factor to Balance Printing Resolution and Stem Cell Integrity , 2016, Advanced healthcare materials.

[11]  S. Hsu,et al.  3D bioprinting of neural stem cell-laden thermoresponsive biodegradable polyurethane hydrogel and potential in central nervous system repair. , 2015, Biomaterials.

[12]  Mahbubul Majumder,et al.  Systems Perturbation Analysis of a Large-Scale Signal Transduction Model Reveals Potentially Influential Candidates for Cancer Therapeutics , 2015, Front. Bioeng. Biotechnol..

[13]  Wei Sun,et al.  The influence of printing parameters on cell survival rate and printability in microextrusion-based 3D cell printing technology , 2015, Biofabrication.

[14]  Joon Hyung Park,et al.  Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels , 2015, Science Advances.

[15]  Hiroshi Iseki,et al.  Real-time, noninvasive optical coherence tomography of cross-sectional living cell-sheets in vitro and in vivo. , 2015, Journal of biomedical materials research. Part B, Applied biomaterials.

[16]  Ralph Müller,et al.  3D Bioprinting of complex channels-Effects of material, orientation, geometry, and cell embedding. , 2015, Journal of biomedical materials research. Part A.

[17]  Wai Yee Yeong,et al.  Smart hydrogels for 3D bioprinting , 2015 .

[18]  Jonathan T. Butcher,et al.  3D-Printed Hydrogel Technologies for Tissue-Engineered Heart Valves , 2014 .

[19]  Anthony Atala,et al.  3D bioprinting of tissues and organs , 2014, Nature Biotechnology.

[20]  J. Lewis,et al.  3D Bioprinting of Vascularized, Heterogeneous Cell‐Laden Tissue Constructs , 2014, Advanced materials.

[21]  Mark A Anastasio,et al.  Imaging challenges in biomaterials and tissue engineering. , 2013, Biomaterials.

[22]  Gangjun Liu,et al.  Capturing the vital vascular fingerprint with optical coherence tomography. , 2013, Applied optics.

[23]  Cleo Choong,et al.  Three-dimensional scaffolds for tissue engineering applications: role of porosity and pore size. , 2013, Tissue engineering. Part B, Reviews.

[24]  K H Kang,et al.  Quantitative optimization of solid freeform deposition of aqueous hydrogels , 2013, Biofabrication.

[25]  J. Schrooten,et al.  Contrast-enhanced nanofocus computed tomography images the cartilage subtissue architecture in three dimensions. , 2013, European cells & materials.

[26]  C K Chua,et al.  The development of silk fibroin scaffolds using an indirect rapid prototyping approach: morphological analysis and cell growth monitoring by spectral-domain optical coherence tomography. , 2013, Medical engineering & physics.

[27]  Brian Derby,et al.  Printing and Prototyping of Tissues and Scaffolds , 2012, Science.

[28]  Peter Dubruel,et al.  A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering. , 2012, Biomaterials.

[29]  K H Kang,et al.  Rapid 3D printing of anatomically accurate and mechanically heterogeneous aortic valve hydrogel scaffolds , 2012, Biofabrication.

[30]  Bernard Choi,et al.  High-resolution imaging of microvasculature in human skin in-vivo with optical coherence tomography , 2012, Optics express.

[31]  Kaushik Chatterjee,et al.  Single cell viability measurements in 3D scaffolds using in situ label free imaging by optical coherence microscopy. , 2012, Biomaterials.

[32]  Hongwei Ma,et al.  Predicting Au–S bond breakage from the swelling behavior of surface tethered polyelectrolytes , 2011 .

[33]  J. Kruth,et al.  Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures , 2011 .

[34]  Jaesung Park,et al.  Development of a hybrid scaffold with synthetic biomaterials and hydrogel using solid freeform fabrication technology , 2011, Biofabrication.

[35]  Rui L Reis,et al.  Three-dimensional plotted scaffolds with controlled pore size gradients: Effect of scaffold geometry on mechanical performance and cell seeding efficiency. , 2011, Acta biomaterialia.

[36]  Yongnian Yan,et al.  Fabricating a pearl/PLGA composite scaffold by the low-temperature deposition manufacturing technique for bone tissue engineering , 2010, Biofabrication.

[37]  Yongnian Yan,et al.  An cell-assembly derived physiological 3D model of the metabolic syndrome, based on adipose-derived stromal cells and a gelatin/alginate/fibrinogen matrix. , 2010, Biomaterials.

[38]  Julian R Jones,et al.  Synchrotron X-ray microtomography for assessment of bone tissue scaffolds , 2010, Journal of materials science. Materials in medicine.

[39]  David Levitz,et al.  Quantitative characterization of developing collagen gels using optical coherence tomography. , 2010, Journal of biomedical optics.

[40]  Xing Liang,et al.  Imaging engineered tissues using structural and functional optical coherence tomography , 2009, Journal of biophotonics.

[41]  Angelika Unterhuber,et al.  Three‐ and four‐dimensional visualization of cell migration using optical coherence tomography , 2009, Journal of biophotonics.

[42]  M A Rupnick,et al.  Three Dimensional OCT in the Engineering of Tissue Constructs: A Potentially Powerful Tool for Assessing Optimal Scaffold Structure. , 2009, The open tissue engineering and regenerative medicine journal.

[43]  Sheng Lin-Gibson,et al.  X-ray imaging optimization of 3D tissue engineering scaffolds via combinatorial fabrication methods. , 2008, Biomaterials.

[44]  Peter Fratzl,et al.  The effect of geometry on three-dimensional tissue growth , 2008, Journal of The Royal Society Interface.

[45]  W. Dhert,et al.  Three-dimensional fiber deposition of cell-laden, viable, patterned constructs for bone tissue printing. , 2008, Tissue engineering. Part A.

[46]  Tejal A Desai,et al.  Optical coherence tomography of cell dynamics in three-dimensional tissue models. , 2006, Optics express.

[47]  Kimberlee Potter,et al.  Non-destructive studies of tissue-engineered phalanges by magnetic resonance microscopy and X-ray microtomography. , 2006, Bone.

[48]  F. Lin,et al.  Generation of three-dimensional hepatocyte/gelatin structures with rapid prototyping system. , 2006, Tissue engineering.

[49]  D. Kaplan,et al.  Porosity of 3D biomaterial scaffolds and osteogenesis. , 2005, Biomaterials.

[50]  L. Phillip,et al.  3D-Printed gelatin scaffolds of differing pore size and geometry modulate hepatocyte function and gene hxpression , 2016 .

[51]  李欢,et al.  Research of Bioengineered Tumor Model in vitro Based on Three-Dimensional Cell Printing Technique , 2015 .

[52]  P. Dubruel,et al.  The 3D printing of gelatin methacrylamide cell-laden tissue-engineered constructs with high cell viability. , 2014, Biomaterials.

[53]  Z. Zhan.  Research of Anti-Tumor Drug Screening Cell Chip Based on 3D Cell Printing Technique , 2014 .

[54]  王. W. Ling,et al.  High-Speed Three-Dimensional Swept Source Optical Coherence Tomography System Based on LabVIEW , 2014 .

[55]  Brendon M. Baker,et al.  Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues , 2012 .

[56]  John P Fisher,et al.  Macroporous hydrogel scaffolds and their characterization by optical coherence tomography. , 2011, Tissue engineering. Part C, Methods.

[57]  Abraham J. Verbout,et al.  Three-dimensional fiber deposition of cell-laden, viable, patterned constructs for bone tissue printing. , 2008, Tissue engineering. Part A.