Chirp-based dispersion pre-compensation for high resolution Lamb wave inspection

Abstract The dispersion of ultrasonic guided waves causes the energy of a signal to spread out in space and time as it propagates, which decreases the performance for damage detection significantly. A lot of signal processing methods have been proposed on how to obtain each mode under serious dispersion for this reason. Based on the chirp technique, a scheme is established to reduce the effect of dispersion by performing dispersion pre-compensation on the original narrowband excitation signals, and thus the time duration of received wave packet can be compressed during the extracting process. Furthermore, benefits from the broadband chirp excitation, information of multiple distinct frequency ranges can be acquired simultaneously, and thus responses to a few narrowband excitations could be readily extracted. This makes the optimal design of the excitation waveform much more efficiently. Numerical simulation and experiment are carried on aluminum specimens to investigate the behavior of the proposed method and the strategy for parameters selection. By using the proposed method, the closely distributed structural features can be recognized with ease in time domain.

[1]  T. Kundu,et al.  Efficient use of Lamb modes for detecting defects in large plates , 1998 .

[2]  S. Gopalakrishnan,et al.  Time reversal technique for health monitoring of metallic structure using Lamb waves. , 2009, Ultrasonics.

[3]  Mathias Fink,et al.  Separation of interfering acoustic scattered signals using the invariants of the time-reversal operator. Application to Lamb waves characterization , 1998 .

[4]  P. Cawley,et al.  The interaction of Lamb waves with defects , 1992, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[5]  Philippe Micheau,et al.  Dispersion-based imaging for structural health monitoring using sparse and compact arrays , 2011 .

[6]  Kazuro Kageyama,et al.  Dispersion analysis of Lamb waves and damage detection for aluminum structures using ridge in the time-scale domain , 2009 .

[7]  A. G. Roosenbrand,et al.  The reflection of the fundamental torsional mode from cracks and notches in pipes. , 2003, The Journal of the Acoustical Society of America.

[8]  P. Cawley,et al.  A signal regeneration technique for long-range propagation of dispersive Lamb waves , 1993 .

[9]  Jennifer E. Michaels,et al.  Multi-mode and multi-frequency guided wave imaging via chirp excitations , 2011, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[10]  Lin Ye,et al.  Guided Lamb waves for identification of damage in composite structures: A review , 2006 .

[11]  Joseph L. Rose,et al.  A Baseline and Vision of Ultrasonic Guided Wave Inspection Potential , 2002 .

[12]  S. Quek,et al.  Detection of cracks in plates using piezo-actuated Lamb waves , 2004 .

[13]  D. Zellouf,et al.  A numerical dispersion compensation technique for time recompression of Lamb wave signals. , 2002, Ultrasonics.

[14]  J. Rose.  Ultrasonic Waves in Solid Media , 1999 .

[15]  P. Wilcox,et al.  The effect of dispersion on long range inspection using ultrasonic guided waves , 2001 .

[16]  Sang Jun Lee,et al.  Chirp excitation of ultrasonic guided waves. , 2013, Ultrasonics.

[17]  T. Michaels,et al.  Guided wave signal processing and image fusion for in situ damage localization in plates , 2007 .

[18]  Paul D. Wilcox,et al.  Mode and Transducer Selection for Long Range Lamb Wave Inspection , 1999 .

[19]  Peter W. Tse,et al.  Evaluation of pipeline defect's characteristic axial length via model-based parameter estimation in ultrasonic guided wave-based inspection , 2011 .

[20]  Sang Jun Lee,et al.  Chirp generated acoustic wavefield images , 2011, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[21]  P.D. Wilcox,et al.  A rapid signal processing technique to remove the effect of dispersion from guided wave signals , 2003, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[22]  M. Fink,et al.  Self-focusing and time recompression of Lamb waves using a time reversal mirror , 1998 .