Effect of Pd(P) thickness on the soldering reaction between Sn–3Ag–0.5Cu alloy and ultrathin-Ni(P)-type Au/Pd(P)/Ni(P)/Cu metallization pad

[1]  C. E. Ho,et al.  Pronounced effects of Ni(P) thickness on the interfacial reaction and high impact resistance of the solder/Au/Pd(P)/Ni(P)/Cu reactive system , 2014 .

[2]  J. Duh,et al.  Quantifying the dependence of Ni(P) thickness in ultrathin-ENEPIG metallization on the growth of Cu–Sn intermetallic compounds in soldering reaction , 2014 .

[3]  J. Duh,et al.  Optimal Ni(P) thickness design in ultrathin-ENEPIG metallization for soldering application concerning electrical impedance and mechanical bonding strength , 2014 .

[4]  S. Wang,et al.  Sn–Ag–Cu solder reaction with Au/Pd/Ni(P) and Au/Pd(P)/Ni(P) platings , 2013 .

[5]  C. C. Wang,et al.  Field-emission transmission electron microscopy study of the reaction sequence between Sn–Ag–Cu alloy and an amorphous Pd(P) thin film in microelectronic packaging , 2013 .

[6]  S. Wang,et al.  Optimization of the Ni(P) Thickness for an Ultrathin Ni(P)-Based Surface Finish in Soldering Applications , 2013, Journal of Electronic Materials.

[7]  J. Duh,et al.  Microstructural variation and high-speed impact responses of Sn–3.0Ag–0.5Cu/ENEPIG solder joints with ultra-thin Ni–P deposit , 2013, Journal of Materials Science.

[8]  J. Huh,et al.  Effects of Pd(P) Thickness on the Microstructural Evolution Between Sn-3Ag-0.5Cu and Ni(P)/Pd(P)/Au Surface Finish During the Reflow Process , 2012, Journal of Electronic Materials.

[9]  Jin-young Park,et al.  Effect of Pd Thickness on the Interfacial Reaction and Shear Strength in Solder Joints Between Sn-3.0Ag-0.5Cu Solder and Electroless Nickel/Electroless Palladium/Immersion Gold (ENEPIG) Surface Finish , 2012, Journal of Electronic Materials.

[10]  F. Shieu,et al.  Ni Interdiffusion Coefficient and Activation Energy in Cu6Sn5 , 2011, Journal of Electronic Materials.

[11]  C. S. Lin,et al.  Influence of Palladium Thickness on the Soldering Reactions Between Sn-3Ag-0.5Cu and Au/Pd(P)/Ni(P) Surface Finish , 2010 .

[12]  C. Kao,et al.  Effect of Cu concentration, solder volume, and temperature on the reaction between SnAgCu solders and Ni , 2010 .

[13]  W. Wu,et al.  Comparative study between Sn37Pb and Sn3Ag0.5Cu soldering with Au/Pd/Ni(P) tri-layer structure , 2010 .

[14]  C. C. Chang,et al.  The effects of solder volume and Cu concentration on the consumption rate of Cu pad during reflow soldering , 2010 .

[15]  T. Laurila,et al.  Formation of Intermetallic Compounds Between Liquid Sn and Various CuNix Metallizations , 2008 .

[16]  Xin Wu,et al.  Surface Finish Effects on High-Speed Signal Degradation , 2008, IEEE Transactions on Advanced Packaging.

[17]  Jin Yu,et al.  Effect of Cu content on the mechanical reliability of Ni/Sn-3.5Ag system , 2007 .

[18]  Xiaoming Chen,et al.  EM Modeling of Microstrip Conductor Losses Including Surface Roughness Effect , 2007, IEEE Microwave and Wireless Components Letters.

[19]  C. Kao,et al.  Interfacial reaction issues for lead-free electronic solders , 2006 .

[20]  K. F. Russell,et al.  Strategies for fabricating atom probe specimens with a dual beam FIB. , 2005, Ultramicroscopy.

[21]  Zhong Chen,et al.  Intermetallic compound formation between Sn–3.5Ag solder and Ni-based metallization during liquid state reaction , 2004 .

[22]  Zhong Chen,et al.  Solid state interfacial reaction of Sn–37Pb and Sn–3.5Ag solders with Ni–P under bump metallization , 2004 .

[23]  Albert Feldman,et al.  Thermal and electrical properties of copper‐tin and nickel‐tin intermetallics , 1992 .