Feedback Control of Melt Pool Temperature During Laser Cladding Process

Laser cladding is a multiple-parameter-dependent process, and a feedback control is critical for the process stabilization. This paper presents a generalized predictive control strategy with input constraints to stabilize the melt pool temperature during a high-power diode laser cladding process. A dual-color pyrometer was used to monitor the melt pool temperature. A state-space dynamic model relating the laser drive signal (laser power) to the melt pool temperature was identified experimentally using the subspace method. A generalized predictive controller with input constraints was implemented in real time using the state-space model. The closed-loop process was able to track the melt pool temperature to a reference temperature profile. Laser cladding of H13 tool steel on a substrate with uneven surface showed that the closed-loop process was able to compensate for an under-fill with 3-mm depth after 40-layer depositions.

[1]  F. Truchetet,et al.  Control and optimization of the laser cladding process using matrix cameras and image processing , 1996 .

[2]  Radovan Kovacevic,et al.  Sensing, modeling and control for laser-based additive manufacturing , 2003 .

[3]  M. Doubenskaia,et al.  Optical monitoring of Nd : YAG laser cladding , 2004 .

[4]  Y. Hua,et al.  Adaptive direct metal/material deposition process using a fuzzy logic-based controller , 2005 .

[5]  Donald Goldfarb,et al.  A numerically stable dual method for solving strictly convex quadratic programs , 1983, Math. Program..

[6]  Alireza Fathi,et al.  Clad height control in laser solid freeform fabrication using a feedforward PID controller , 2007 .

[7]  D. Clarke,et al.  A state-space description for GPC controllers , 1993 .

[8]  F. Liou,et al.  Modeling of laser cladding with powder injection , 2004 .

[9]  M. Powell.  On the quadratic programming algorithm of Goldfarb and Idnani , 1985 .

[10]  Reinhart Poprawe,et al.  Investigation on the direct laser metallic powder deposition process via temperature measurement , 2006 .

[11]  Amir Khajepour,et al.  A mechatronics approach to laser powder deposition process , 2006 .

[12]  Ehsan Toyserkani,et al.  An image-based feature tracking algorithm for real-time measurement of clad height , 2007, Machine Vision and Applications.

[13]  Amir Khajepour,et al.  Geometry Control of the Deposited Layer in a Nonplanar Laser Cladding Process Using a Variable Structure Controller , 2008 .

[14]  Reinhart Poprawe,et al.  Development and qualification of a novel laser-cladding head with integrated sensors , 2007 .

[15]  Noboru Kikuchi,et al.  Closed loop direct metal deposition : art to part , 2000 .

[16]  A. Khajepour,et al.  Development of trinocular CCD-based optical detector for real-time monitoring of laser cladding , 2005, IEEE International Conference Mechatronics and Automation, 2005.